MAPerformance MAP Z-CBE Cat-Back Exhaust System Installation Guide

MAPerformance MAP Z-CBE Cat-Back Exhaust System

Product Information

The product is a MAP Z-CBE (Z Y-Pipe) and MAP INF-Q60-CBE (Infiniti Q60 Axlebacks) exhaust system for the 2023+ Nissan Z and 2016+ Infiniti Q60. The package includes the following items:

• 1x MAP 2023 Z Y-Pipe
• 2x MAP 2023 Z Axlebacks
• 2x 4.5 Exhaust Tips (Options Available)
• 3x Exhaust Clamps
• 2x 2.5 Exhaust Gaskets
• 4x M10 x 1.25mm Bolts
• 4x M10 x 1.25mm Flanged Nuts
• 1x Anti-Seize Packet

The exhaust system is designed to enhance the performance and sound of the vehicle. It is compatible with both the Nissan Z and Infiniti Q60, with slight differences in length.

Product Usage Instructions

1. Using a 16mm socket, remove the OEM Y-Pipe to downpipe nuts (x4).
2. Using a 14mm socket, remove the lower support brace (x4).
3. Remove all four exhaust hangers and detach the entire exhaust as one assembly.
4. Remove the mid pipe bracket.
5. Install the MAP Y-Pipe onto the passenger side downpipe using the included hardware. Use the included downpipe gasket. Reinstall the lower support brace.
6. Install the driver-side Y-Pipe leg onto the driver’s side downpipe using the included gasket and hardware.
7. Secure the driver-side Y-Pipe leg with the included slip clamp.
8. Install the rear exhaust section using the OEM hangers to hold the exhaust in place.
9. Install slip clamps on both sides of the exhaust and tighten.
10. Install the tips on both sides, ensuring to use the included anti-seize on the clamp threads.

For any issues or concerns, please contact MAPerformance support:

• Phone: 1-888-627-3736
• Email: support@maperformance.com
• Website: www.maperformance.com
• Facebook: www.facebook.com/modernautomotiveperformance/

We hope you enjoy your purchase!

What’s in the box

• 1x MAP 2023 Z Y-Pipe
• 2x MAP 2023 Z Axlebacks
• 2x 4.5” Exhaust Tips (Options Available)
• 3x Exhaust Clamps
• 2x 2.5” Exhaust Gaskets
• 4x M10 x 1.25mm Bolts
• 4x M10 x 1.25mm Flanged Nuts
• 1x Anti-Seize Packet

Tools needed

You will need:

• 16mm socket
• 14mm socket
• 3/8ths ratchet

These instructions are applicable to the 2023+ Nissan Z as well as 2016+ Infiniti Q60, these exhausts are slightly different in length but install identically.

Installation

Step 1
Remove OEM Y-Pipe to downpipe nuts (x4)

Step 2
Remove lower support brace (x4 14mm)

Step 3
Remove all 4 exhaust hangers and remove entire exhaust as one assembly

Step 3.1
Remove midpipe bracket

Step 4
Install MAP Y-Pipe onto the passenger side downpipe and secure it with included hardware. Be sure to use the included downpipe gasket. Reinstall lower support brace.

Step 5
Install driver side Y-Pipe leg onto the drivers side downpipe, install with included gasket and hardware.

Step 6
Secure the driver side Y-Pipe leg with included slip clamp

Step 7
Install rear exhaust section utilizing the oem hangers to hold the exhaust in place

Step 8
Install slip clamps on both sides of exhaust and tighten

Step 9
Install tips on both sides, be sure to use included anti-seize on clamp threads

We hope you enjoy your purchase!
Reach out to us with any issues or concerns.

Contact Information

• 1-888-627-3736
• @maperformance
• support@maperformance.com
• www.facebook.com/modernautomotiveperformance/.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>