WyreStorm CAB-DAOC-10-C 32Gbps 8K 60Hz DisplayPort 1.4 Active Optical Cable User Guide
- June 6, 2024
- WyreStorm
Table of Contents
Quickstart Guide
32Gbps 8K 60Hz DisplayPort 1.4 Active Optical Cable with DP++ Support
(10m/32ft)
CAB-DAOC-10-C
CAB-DAOC-10-P
WyreStorm recommends reading through this document in its entirety to become familiar with the product’s features prior to starting the installation process.
IMPORTANT!
Installation Requirements
The cable is uni-directional. Follow the connector labeling and color-coding
to ensure proper operation of the cable.
In The Box
- 1x CAB-DAOC-10-C or CAB-DAOC-10-P Active Optical DisplayPort Cable
- 2x Reusable Cable Ties
- 1x Quickstart Guide (This Document)
Cable Distances
CAB-DAOC-10-C
CAB-DAOC-10-P
Wiring and Connections
IMPORTANT! Installation Requirements
The WyreStorm Active Optical cable is designed to transmit DisplayPort signals
from the source to a display.
-
Follow the labeling and the diagrams for connection to ensure proper operation.
-
Due to the core of the DAOC being fiber optic the cable cannot have a bend radius greater than 2cm/0.78in.
Keep this in mind when routing cables around objects and inside of walls. -
The cables have a max pull tension of 15kg/33lbs. Keep this in mind when routing the cable within cabinets or walls to avoid damaging the cable.
Basic Wiring Diagram
Source Connection Label: TX Color: Gray
|
Display Connection Label: TX Color: Gray
---|---
Warranty Information
WyreStorm Technologies LLC warrants that its products be free from defects in material and workmanship under normal use for a period of five (5) years from the date of purchase. Refer to the Product Warranty page on wyrestorm.com for more details on our limited
Specifications
Transmission
Transmission Encoding| Uncompressed AOC
End to End Latency| 10ps
Maximum Transmission Bit Rate| 324Gbps (4-core, 8.1G bps per lane)
Video
DisplayPort| (v1.4) LVDS 186/1 Ob encoding DSC v1.2 (Display Stream
Compression) Supported
Input| lx DisplayPort: 20-pin Male
Output| lx DisplayPort: 20-pin Male
Maximum Data Rate| 25.92Gbps
Supported Video Resolutions*| | CAB-DAOC-10-C| CAB-DAOC-10-P
1920 x 1080p @240Hz 2560 x 1440p @240Hz 3840 x 2160p @120Hz 5120 x 2880p @60Hz
7680 x 4320p @60Hz| 10m/33ft| 15m/49ft
Supported Standards| DSC I Static HDR I HDR10
Audio
Audio Formats| 24-bit PCM
Maximum Sampling Rate| 192KHz
Maximum Audio Channels| 32
Communication and Control
HDCP| Pass-through, 2.2 Supported
EDID| Pass-through, RX,TX
Consumer Electronics Control (CEC)| Bidirectional Supported
Installation Restrictions
Max Bend Radius| 2cm/0.78in
Max Pull Tension| 151(Q/331bs
Orientation| Uni-directional – Observe signal Bow direction prior to
installation
Power
Power Supply| Passive 3.3v-5.5v VCC (From Connected Source)
Max Power Consumption| 250mW
Environmental
Operating Temperature| 14°F – 122°F (-10°C – 50°C) 110% – 90%, non-condensing
Storage Temperature| -4°F to – 140°F (20°C – +60°C) 110% – 90%, non-condensing
Maximum BTU| 0.85 BTU/hr
Jacket Material| CAB-DA0C-1 0-C: Non-PVC
CAB-DA0C-1 0-P: PVC
Dimensions and Weight (Connecbr Hou Bing)
Height| 12mm/0.47in
Width| 21 mm/0.82in
Depth| 45mm/1.77in
Weight| NA
---|---
Cable Length (Connector to Connector)| CAB-DAOC-10-C:
CAB-DAOC-10-P:| 10m/33ft
10m/33ft
Regulatory
Safety and Emission| CAB-DAOC-10-C:
CAB-DAOC-10-P:| CE | FCC | CPR | RoHS | LSZH | EAC
CE | FCC | UL (Plenum) | RoHS | EAC
*denotes supported resolutions using DSC (Display Stream Compression) (requires source-sink compatibility)
Note: WyreStorm reserves the right to change product specification,
appearance, or dimensions of this product at any time without prior notice.
Copyright © 2020 WyreStorm Technologies
wyrestorm.com
CAB-DAOC-10-x Quickstart Guide
200318
UK: +44 (0) 1793 230 343
ROW: 844.280.WYRE (9973)
support@wyrestorm.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>