MAPerformance WRX-5G-RMD Axle Back Exhaust Instruction Manual
- June 12, 2024
- MAPerformance
Table of Contents
MAPerformance WRX-5G-RMD Axle Back Exhaust
Product Information
The MAP WRX-5G-RMD is an exhaust upgrade kit specifically designed for the WRX 5th generation model. It includes two MAP Axlebacks, two MAP 3.5 Dual Tips, two Tip Clamps, four M10x1.25x40mm Bolts, four M10x1.25 Flanged Nuts, and one Anti-seize.
Product Usage Instructions
- Place the vehicle on a lift.
- Using a 14mm socket, remove the 4 y-pipe bolts from both mufflers.
- Remove the 4 rubber hangers from both mufflers and remove the mufflers.
- Ensure that the gasket is still in place on the y pipe ends. Place the MAPerformance muffler delete in place, securing it with the factory hangers.
- Secure the MAP muffler delete to the factory Y pipe using the OEM bolts that were removed in step 4.
- Install the included exhaust tips, securing them with the included clamps. Make sure to use the included anti-seize on the threads of the clamp and tighten the clamps using hand tools.
- Start the vehicle and check for any leaks. Ensure that the tips are straight.
We hope you enjoy your purchase! If you have any issues or concerns, please reach out to us:
- Phone: 1-888-627-3736
- Email: support@maperformance.com
- Website: www.maperformance.com
- Social Media : Facebook
What’s in the box
- x2 MAP Axlebacks
- x2 MAP 3.5” Dual Tips
- x2 Tip Clamps
- x4 M10x1.25x40mm Bolts
- x4 M10x1.25 Flanged Nuts
- x1 Anti-seize
Tools needed
You will need:
- 10mm socket
- 14mm socket
- 3/8ths ratchet
INSTALLATION
- Place vehicle on lift
- Remove 4 y-pipe bolts from both mufflers (14mm socket)
- Remove 4 rubber hangers from both mufflers and remove mufflers
- Ensure gasket is still in place on the y pipe ends and place MAPerformance muffler delete in place securing with factory hangers
- Secure MAP muffler delete to factory Y pipe with oem bolts you removed in step 4
- Install included exhaust tips, securing with included clamps be sure to use included anti seize on the threads of the clamp and use hand tools to tighten clamps
- Start and check for leaks, ensure your tips are straight!
We hope you enjoy your purchase! Reach out to us with any issues or concerns
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>