HOFFEN FJ-15A Clip-On Desk Fan Instruction Manual

: October 30, 2023
: Hoffen

HOFFEN FJ-15A Clip-On Desk Fan

HOFFEN-FJ-15A-Clip-On-Desk-Fan-product-image

Product Information

The Clip-On Desk Fan Model FJ-15A is a compact and portable fan designed for use on desks, tables, and other flat surfaces. It features a clip-on design that allows it to be attached to surfaces such as shelves, desks, or bed frames. The fan has a power rating of 15W and operates on 220-240V~ at 50-60Hz. It has a 360-degree oscillation feature and can be tilted up to 45 degrees for optimal airflow. The package includes an instruction manual, the fan with a clip, and a base.

Product Usage Instructions

Attach the fan to a stable, flat surface such as a table or shelf using the clip-on feature.
Select the desired speed setting using the control switch. There are three settings: Off, Low, and High.
The fan can be adjusted to oscillate 360 degrees for maximum coverage.
The fan can also be tilted up to 45 degrees to direct airflow where needed.
Do not cover the fan blades while in use.
For safety reasons, do not leave any parts of the packaging within reach of children or pets.

For any questions or concerns regarding the product’s functionality, please contact info@joinco.com.pl. The product is covered by a 36-month warranty from the date of purchase. In case of any defects, please return the product to the point of purchase with proof of purchase. Please note that consumable parts are not covered by the warranty.

INTRODUCTION

Thank you for choosing a Hoffen product. We are certain that you will enjoy it. Please read this instruction manual before using the product, specifically the safe use directions. Please save this instruction manual for future reference.

TECHNICAL SPECIFICATION

Model: FJ-15A
Batch number: 115/22
Power source: 220-240 V~, 50-60 Hz
Power: 15 W
Head tilt angle: 45 degrees
Head rotation positioning: 360 degrees

INTENDED USE

This device produces a stream of cool air. The product can be used in kitchens and other rooms.
The device is intended for personal use only and is not suitable for commercial purposes. The device is intended for indoor use only.
Never use the device for any other purposes. All other use of the device may lead to its damage or your physical injury.
The manufacturer is not responsible for damage resulting from misuse of the product. By following this instruction manual, you will ensure that the product is assembled, installed, and used in a safe manner.
WARNING! Never cover the head of the fan!

Open the packaging and carefully take out the contents. Make sure that nothing is missing or damaged. Make sure that nothing is cracked or scratched. If anything is missing or damaged, refrain from using the product and promptly contact the point of purchase. Keep the packaging for future reference or utilise it in accordance with local regulations.
Attention! With consideration of the safety of children and pets, never leave the packaging elements (plastic bags, cardboard, polystyrene foam, etc.) lying around. Suffocation hazard!

Contents: 1 x instruction manual, 1 x clip-on fan, 1 x base

SAFE USE DIRECTIONS

Please read the instruction manual carefully before first use. Always follow the recommendations of the instruction manual when using the device. It is recommended to keep the packaging and instruction manual for future reference. If you lend or give the device to someone else, please include the instruction manual. The instruction manual is also available in electronic format at info@joinco.com.pl

WARNINGS:

The device can be used by children aged 8 and over and people with physical, mental, or sensory restrictions or without the required knowledge and experience as long as they are supervised or have been instructed in scope of using the device in a safe manner and according to the instruction manual and understand the potential hazards.
Children should not treat the device as a toy.
Children cannot perform cleaning and maintenance of the device unless they are under adult supervision.
If the power cable is damaged, it must be replaced by the manufacturer, a representative of the manufacturer, or an appropriately authorized individual in order to avoid danger.
With consideration of your safety, we recommend that you do not remove the protective grill from the fan.
Before plugging the device into a power source, please straighten out the cable.
Never use the device when the grill is removed or damaged.
The device must be standing on a hard, flat, and stable surface to prevent it from toppling over when being used.
Never try to move an operating device. Turn off the device before moving it.
Before use, the device must be assembled completely! Never use a partially assembled device or a device with damaged parts.
Keep the device at least 50 cm away from other objects (drapes, walls, etc.).
Keep your hands, hair, clothing, or accessories away from the protective grill of an operating device to prevent physical injury and damage to the device. Never cover the device.
WARNING! Misuse may lead to physical injury.
Electrical shock hazard! Never repair the device without professional assistance. If the device is malfunctioning, entrust its repairs to a qualified professional.
Before removing the grill, please make sure that the fan is not connected to a power source.
When removing the plug from the outlet, never tug it by the wire or wind the cable around the device.
Never use accessories not included by the manufacturer as they can produce a risk to the safety of the user and damage the device. Use only genuine accessories.
The device is intended for personal use indoors only.
Protect the device, the cable, and the plug from dust, direct sunrays, and dripping or splashing water.
Before putting away the device after use, please wait until it cools off completely.
Never use the device near an open window. Rain may produce an electrical shock hazard.

Electrical safety

Never open the casing. Do not place your fingers or other objects into the device and do not obstruct the ventilation ports.
Protect the device from high temperatures. Do not place it in proximity of open flame or sources of heat such as ovens or heaters.
Never use the fan when the grill is removed or damaged.

PRODUCT DESCRIPTION

Front grill
Fan blades
Rear grill
Motor casing
Speed setting switch
Tilt dial
Power cable
Clip

ASSEMBLY AND USE

Attach the fan to the ROTATING STAND and tighten the SCREW ADJUSTING THE FAN ANGLE (see Fig. 2)

Use
Position the fan on a stable and flat surface (e.g. windowsill or tabletop) and plug it in.

Set the desired speed
Speed 1 — Low
Speed 2 — High
Speed 0 — Off
The fan can be adjusted in 360 degrees (see fig. 5)
The fan can be adjusted vertically in 45 degrees (see fig. 4)
The fan can be clipped to flat surfaces such as windowsills or tabletops (see fig. 3)

HOFFEN-FJ-15A-Clip-On-Desk-Fan-3

CLEANING AND STORAGE DIRECTIONS

Cleaning

• Always remember to turn the device off before cleaning.
• Never clean the device with steel wool, strong chemicals, alkalis, abrasives, or disinfectants, which may produce a risk of damaging the surface.
• During the cleaning process, never submerge the device in water or any other liquids. Protect the electrical elements of the device from water and humidity.
• Clean the casing with a soft damp cloth and – if necessary – a little detergent. Wipe with a dry and soft cloth.
• Never use the device until it is completely dry.

Storage

• Before storage, always make sure that the device is clean and completely dry.
• Store the device in a cool and dry location protected from humidity and out of the reach of children.
• It is recommended to store the product in its original packaging.

TROUBLESHOOTING

In the event of any problems, please return the device to the point of purchase. Never attempt to open the casing of the device or other sealed elements without professional assistance.

DECLARATION OF CONFORMITY WITH EUROPEAN STANDARDS

This device conforms to the requirements of the Electromagnetic Compatibility Directive (EMC) and, as such, bears the CE marking and holds the declaration of conformity with European standards.

WARRANTY

In order to file a complaint, please bring the purchased product to the Customer Support Point in any Biedronka store. If you should have any questions or concerns as to the product’s operation, please send them to the following e-mail address: info@joinco.com.pl.

The guarantor of this product provides a 36-month warranty counted from the date of the product’s purchase. If a defect is identified, the appropriate complaint should be filed to the point of purchase.
A damaged product is a product, which fails to fulfil the functions specified in the instruction manual due to an internal property.
The individual authorised to exercise the guarantee is obliged to deliver the device to the Customer Support Point of the given store in order to file a complaint towards the device with proof of purchase (receipt, invoice). An exhaustive specification of the defect in question should also be included.
The warranty does not cover physical damage not attributable to the manufacturer or distributor.
The warranty does not cover products subject to repair, modification, or structural alternation attempts.
The warranty does not cover components subject to natural wear in use.
When filing a complaint, please provide the complete device in order to facilitate identification of the defect.
The repair shop will do everything in its power to complete the repairs within 21 days. This time may be extended to 1 month when the repair shop should need to order any replacement parts not currently in stock.
This warranty for the sold consumption good does not exclude, restrict, or suspend the rights of the purchaser established in the provisions on implied warranty for defective sold objects in accordance with the regulations of the Civil Code dated 23 April 1964 (Journal of Laws 2014.121).
The warranty protection covers the territory of Poland and products purchased at the Biedronka store chain only.

UTILISATION OF USED PRODUCT

This symbol means that the product cannot be disposed together with other household waste. The law of Poland prohibits combination of used electrical and electronic equipment with other waste under the penalty of a fine. If you utilize the product properly, you can prevent the potential negative effects on the natural environment and human health, which would result from improper handling of electrical and electronic equipment waste.

SYMBOLS

This symbol means that the product comes with an instruction manual, which should be read before use.
When the “Green Dot” symbol appears on packaging, it signifies that the importer has made a financial contribution towards development and operation of the national packaging recovery and recycling system in accordance with the standards resulting from the laws of Poland and the European Union on packaging and packaging waste.
This product fulfils the requirements of Directive 2011/65/EU – the so-called RoHS Directive. The Directive aims to lay down the rules for Member State laws concerning restriction of hazardous substances in electrical and electronic equipment and contribute to the protection of human health and the environmentally sound recovery and disposal of waste electrical and electronic equipment.
The RoHS Directive is in effect from 3 January 2013. New marketed electric and electronic equipment does not contain lead, mercury, cadmium, chromium VI, polybrominated biphenyls, or polybrominated diphenyl ethers.
The device is suitable for use in tropical weather.
Designation of the material used to make the packaging – paper.
Product suitable for indoor use only.
Designation of the container to dispose the packaging – paper.
Designation of the container to dispose the packaging foil – plastic/metal.
Packaging elements are to be disposed into appropriate containers.
Shock protection safety class symbol II.