2E-PSP0010 Portable Solar Panel User Manual
- June 13, 2024
- 2E
Table of Contents
2E-PSP0010 Portable Solar Panel
Product Information
- Product Name: Portable Solar Panel
- Model: 5PUBMQPXFS
Specifications
- Input: 0VUQVU 4J[F ‘PMEFETJ[F 8FJHIU
- Output: USB-A 5/2.4A
- Dimensions: 660 x 148 mm
- Weight: 360 grams
- Water Resistance: IPX4
Product Usage Instructions
- Ensure the solar panel is exposed to sunlight for charging.
- If you want to charge your iPhone or iPad, connect the device to the solar panel using a suitable cable.
- If you want to charge other devices, such as a power bank, connect them to the solar panel using the appropriate cable.
- Make sure to position the solar panel in a way that maximizes sun exposure for optimal charging efficiency.
- Monitor the charging progress by checking the LED indicator. It should reach at least 80% for a full charge.
Warm Tips and Cautions
- Keep the solar panel away from water and other liquids to avoid damage.
- Avoid exposing the solar panel to extreme temperatures or direct heat sources.
- Do not disassemble or modify the solar panel.
- Follow the safety guidelines and instructions provided in the user manual.
- For further assistance or information, please refer to the contact details below
Contact Information
- Email: [email protected]
- 123-456-7890
IN THE BOX
- Foldable Solar Charger
- User manual
SPECIFICATION
HOW TO USE
- Firstly, please check the sunlight environment
- Place the solar charger under strong sunlight (the perfect time is from 9:00 am to 17:00 pm, but Different countries may have different best illumination times).
- Angle solar panels toward sunlight in a vertical direction, which makes devices achieve the maximum conversion efficiency of solar energy.
- Do remove any possible shelters
Charging of tablet/smartphone
Please check the indicator light status. The Blue LED indicator light means it is working. The Red LED light means it is overloaded or short-circuited.
- Please use cables from your device packaging or certified ones.
- Please check whether the phone or other device is connected correctly (in case of intensive sunlight, it does not charge your gadget efficiently.
- We advise you to turn your device and retry).
WARM TIPS
- Please use the charger in sunny weather, The current is relatively small on a cloudy day, so the charging speed can be slow.
- iPhones and iPads require a large current, please re-insert the connector to activate the charge if there is a note “This device is not identified”.
- Solar energy is for emergency purposes, so the charging may take a long time.
- For better effect, it is recommended to use the charging with a power bank, the current is more stable and safer for your device.
- When charging, we don’t advise long-term outdoor exposure of the mobile phones and other devices, high temperatures may lead to the failure of the battery.
- Our solar charger is made from recyclable solar panels and the solar panels belong to physical batteries that can be used many times, even after years of use and marital aging, their power can still achieve more than 80%.
CAUTIONS
-
Do not scratch the surface of the solar panel with a sharp object.
-
Place the solar panels in direct sunlight, and adjust their angle towards sunlight (vertical direction) to achieve the optimal charging effect.
-
Do not place the charger in the rain for emergency purposes, and we do not recommend long-term outdoor exposure.
-
It is normal that panels get hotter during working time as they are recharged by solar energy.
Attention: We advise using the solar foldable panel under intensive sunlight. If it is a cloudy day or rainy day outdoors, it may not work) -
The solar charger will priority charge the devices with strong power when it fails to charge multiple devices simultaneously without intensive sunlight.
-
As the junction box is NOT waterproof, please do not expose to liquids.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>