NAVTOOL Video Input Interface Push Button User Manual
- October 30, 2023
- navtool
Table of Contents
NAVTOOL Video Input Interface Push Button
Product Information
The Video Input Interface Push Button is a product designed and manufactured by NavTool.com. It allows users to add up to three additional video inputs to their factory-installed navigation screen. This product is compatible with a wide range of car makes and models. Please note that NavTool.com recommends having this installation performed by a certified technician. All product names, logos, brands, trademarks, and registered trademarks are the property of their respective owners.
Product Usage Instructions
- Ensure that your vehicle’s ignition is turned off before beginning installation.
- Locate the factory-installed navigation screen in your vehicle.
- Connect the Video Input Interface Push Button to the navigation screen using the provided cables and connectors.
- Connect up to three additional video inputs (such as a DVD player or gaming console) to the Video Input Interface Push Button.
- Turn on your vehicle’s ignition and test the additional video inputs on the navigation screen.
If you encounter any issues during installation or usage, please contact NavTool.com at +1-877-628-8665 or text at +1-646-933-2100 for further assistance.
NOTICE:
We recommend having this installation performed by a certified technician.
All product names, logos, brands, trademarks, and registered trademarks are
the property of their respective owners.
INSTALLATION INSTRUCTION
You do not need to use the push button if only a reverse camera was
installed
The reverse camera will automatically display when the vehicle is placed in
Reverse. It will automatically Turn OFF when the vehicle is placed in any
other gear and will display the factory screen. To View Video 2 (Front Camera
if Installed)
If no video source is connected you will see a “No Signal” message.
- Step 1: Press the push button once to Turn ON the interface. This will display Video 1.
- Step 2: Press the push button once to switch from Video 1 source to Video 2 source.
- Step 3: Press and Hold the push button for 2 seconds to return to the factory screen.
- NavTool.com
- Call: +1-877-628-8665
- Text: +1-646-933-2100