bolero TLM 603500 White Telescopic Extractor Hood Instruction Manual

bolero TLM 603500 White Telescopic Extractor Hood

Product Information

Specifications

• Model: BOLERO FLUX TLM 603500 WHITE A / BOLERO FLUX TLM 603500 BLACK A / BOLERO FLUX TLM 603500 INOX A / BOLERO FLUX TLM 606500 INOX A
• Color options: White, Black, Stainless
• Installation: Countertop gas stove

Frequently Asked Questions

• Q: Can children use this product?
  • A: This appliance can be used by children aged 8 years and above under adult supervision.
• Q: What should I do if there is a gas leak?
  • A: In case of a gas leak, immediately turn off the gas supply and ventilate the area. Do not operate any electrical switches or create sparks. Contact a professional technician to fix the gas leak.
• Q: How often should I clean the burner caps and grates?
  • A: It is recommended to clean the burner caps and grates regularly, at least once a month, to prevent grease buildup and ensure proper functioning of the burners.

PARTS AND COMPONENTS

Fig. 1. Speed control switch

• A. Low speed
• B. Stop (off)
• C. High Speed

Fig. 2. Light switch

• A. Switch off
• B. Switch on

NOTE: the graphics in this manual are schematic representations and may not exactly match the device.

BEFORE USE

• This appliance is packaged in a way as to protect it during transport. Take the device out of its box and remove all packaging materials. You can keep the original box and other packaging elements in a safe place. This will help you prevent damage to the device when transporting it in the future. In case the original packaging is disposed of, make sure all packaging materials are recycled accordingly.
• Make sure all parts and components are included and in good conditions. If there is any piece missing or in bad conditions, contact the official Cecotec Technical Support Service immediately.

Box content

• Kitchen hood
• Assembly kit (depending on model)
• Instruction manual

INSTALLATION

The dimensions of the following kitchen hoods are shown in Figure 3.

• 02859_Bolero Flux TLM 603500 White A
• 02860_ Bolero Flux TLM 603500 Black A
• 02861_ Bolero Flux TLM 603500 Inox A

The dimensions of the following kitchen hoods are shown in Figure 4.
02862_ Bolero Flux TLM 606500 Inox A

• Before installing the kitchen hood, make sure that the area is clean to prevent it from sucking in dust or dirt.
• Please note that the kitchen hood must not share the same ventilation duct with other appliances that use gas or other fuses.
• To facilitate air outlet, the ventilation duct should have a curvature of ≥120° and should be connected to the outside wall, parallel to or above the starting point.
• After installation, ensure that the kitchen hood is level to prevent grease build-up on the end (Fig. 5).

Steps to install the kitchen hood:

1. The kitchen hood should be placed at a distance of 65-75 cm above the cooking surface for best effect (Fig 6).
2. Using a drill, drill 4 Ø 5 mm holes and a Ø 170 mm hole at the bottom of the wall unit as shown in Figure 7.

   •   *  **Fig. 7 key**

   • A. Hole 4 – ø5 mm
   • B. Hole ø170 mm
   • C. Washer (gasket) 4 – ø12
   • D. Screw 4 – M4x30
   • E. Cabinet
   • F. Air outlet
   • G. Washer 4 -M4
3. Remove the mesh filter. Insert the plastic plugs into the holes and secure the kitchen hood to the cabinet using the screws. Make sure it is centred with the worktop and replace the filter.
4. Once the kitchen hood has been hung up, you can install the flexible chimney connection pipe (Ø150 mm) at the outlet of the ventilation duct, located at the top of the kitchen hood (Fig. 8). If necessary, connect the other end of the flexible connection pipe to the wall chimney.
5. Connect the connection cable to the mains socket.
   • Black cable (or brown, depending on models) > Phase
   • Blue cable > neutral
   • Yellow-Green cable > ground

You must connect the phase and neutral cables to a 220-240 V~/ 50 Hz power cable.
The kitchen hood must be connected to an earthed installation.

OPERATION

Switches

1. To switch on the kitchen hood, set the switch to position “I” or “II”.
2. In the low-power position (I), the motor will operate at low speed.
3. In the high-power position (II), the motor will operate at high speed.
4. To stop the operation of the kitchen hood, turn the switch to the “0” position.
5. To switch on the light, put the switch to “I” position.
6. To switch off the light, put the switch to “0” position.

NOTE: the hoods are equipped with an overheating protection system that acts to prevent possible incidents when the motor temperature exceeds the operating limit value.

CLEANING AND MAINTENANCE

Always switch off the power supply before cleaning or performing any maintenance work on the kitchen hood. Please note that the cleaning and maintenance frequency depends on the use frequency and intensity.

1. To prevent the outer surface of the kitchen hood from deteriorating over time, it is recommended that it be cleaned with hot water and a non-corrosive detergent every two months.
2. Do not use abrasive detergents. Otherwise, the surface of the kitchen hood may be damaged.
3. Keep the motor and other parts away from water, as water may damage the appliance.

Cleaning the filters

Do not use corrosive detergents to clean grease from the mesh filters. Regular cleaning of the filters will prolong the life of the appliance and keep it in good working order. Follow the instructions below:

• Cleaning method 1: immerse the mesh filters in hot water (40-50 °C), add neutral detergent and let them soak for 2 to 3 minutes. Protect yourself with gloves and clean the filters with a soft brush or scouring pad. Do not apply too much force, as filters are very delicate and can be easily damaged.
• Cleaning method 2: if you wish, you can also wash the filters in the dishwasher at a temperature of approx. 60 °C.
• To remove the filter, press on the tabs as shown in Figure 9 and pull it out.

Carbon filter

This type of filter has activated carbon and purifies air and absorbs cooking odours. The activated carbon becomes saturated after a period of time, which will reduce the adsorption capacity of the filter. The carbon filter cannot be washed nor cleaned in any way. When its service life comes to an end you must replace it with a new one.

• It is recommended to check the condition of carbon filters regularly, at least two or three times a year. Its replacement will depend on how the kitchen hood is used, as well as the daily operating time.
• In case of very frequent frying, shorten the time interval for checking and/or replacing the carbon filters.

Installing the carbon filters

1. Remove the protective metal filters.
2. The carbon filters are located on both sides of the motor. Insert and turn the filters, until they are firmly in place.
3. To replace the carbon filter, proceed in reverse order.
4. The carbon filter must not be exposed to heat.

   •   *  **Fig. 10:**

   • A: Closed
   • B: Opened
   • C: Opened
   • D: Closed

Carbon filter diameter

• Article No 02859/02860/02861 > 132 mm
• Article No 02862 > 176 mm

Replacing the light bulb/lamp

Please note

• The light bulb must be replaced by the official Cecotec Technical Support Service or similarly qualified technicians.
• Always disconnect the power supply before performing any operation on the appliance.
• When handling the bulb, make sure that it has cooled down completely before any direct contact with your hands.
• When handling the bulbs, hold them with a cloth or gloves to prevent sweat from coming into contact with the bulb, as this may reduce the bulb life.

Note

• Before changing the light bulb, make sure that the appliance is switched off and unplugged.
• Protect yourself from danger when changing the light bulb, e.g., by wearing gloves.

TROUBLESHOOTING

Support Service to replace the condenser.
Motor is jammed or bearing damaged| Please contact the official Cecotec Technical Support Service to replace the motor.
Motor is burnt or gives off a bad smell| Please contact the official Cecotec Technical Support Service to replace the motor.
Neither the light bulb nor the motor work| In addition to the above, check the following:
The light bulb has blown| Please contact the official Cecotec Technical Support Service to replace the light bulb.
Power cable is loose| Please contact the official Cecotec Technical Support Service to connect the cables according to the wiring diagram.
Grease falls out of the aluminium filters| The filters are very dirty| Clean or replace the aluminium filters immediately
The kitchen hood vibrates| The fan is damaged, causing the kitchen hood to vibrate when extracting air.| Please contact the official Cecotec Technical Support Service to replace the fan.
The engine is not securely fastened| Fix the engine correctly
The kitchen hood is not securely fastened| Fix the kitchen hood correctly
The kitchen hood is not sufficiently extracting| The distance between the kitchen hood and the cooking surface is too large.| Readjust the distance
---|---|---
There is too much ventilation in the room due to open doors or windows| Relocate and reinstall the kitchen hood
The kitchen hood is tilted| Fastening screws are not tightened properly| Reposition the kitchen hood horizontally and tighten the screws.
Plastic plugs are not tightened properly| Reposition the kitchen hood horizontally and tighten the plugs.

If none of these situations match your problem, do not attempt to disassemble, or repair the appliance by yourself. Repairs carried out by unqualified persons may result in injury or serious malfunctions. Contact the official Cecotec Technical Support Service. The repair must be carried out by an authorised technician, and you must use only original spare parts.
Unauthorised self-maintenance or maintenance will affect the safe use of the product and the application of the warranty policy.

NOTE

• Any electrical repairs to this appliance must conform to local and/or state laws.
• Please contact the official Cecotec Technical Support Service in case of doubt and before carrying out any of the above operations. Always disconnect the device from the power supply when opening it.

TECHNICAL SPECIFICATIONS

All technical information is available on the public website of the European Product Register for Energy Labelling (EPREL):

eprel.ec.europa.eu/screen/home
Regulation (EU) 65/2014
EU Directive 2010/30/EU

• Product reference: 02859 / 02860 / 02861
• Product name: Bolero Flux TLM 603500 White A / Bolero Flux TLM 603500 Black A / Bolero Flux TLM 903500 Inox A
• Rated voltage: 220-240 V
• Rated frequency: 50 Hz
• Total power: 71.5 W
• Motor: 70 W
• Light bulb: 1 x 1.5 W
  • 650 m³/h air flow
• Bulb type: rectangular LED light
• Bulb dimensions: (120 x 33) mm
• ILCOS Code D: DBL-1.5-S-120/33

Model reference

|  | 02859 / 02860/

02861

|
Annual energy consumption| AEC hood| 22.3| kWh/a
Time increment factor| f| 1.2|
Fluid dynamic efficiency| FDE hood| 21.7|
Energy Efficiency Index (EEIW)| EEI hood| 52.5|
Measured airflow at maximum efficiency point| QBEP| 188.2| m3/h
Air pressure measured at maximum efficiency point| PBEP| 197| Pa
Maximum airflow| Qmáx| 372.5| m3/h
Electrical input power measured at maximum efficiency point| WBEP| 47.5| W
Nominal power of the lighting system| WL| 2| W
Measured illumination of the illumination system on the cooking surface| Emed| 79| lux
Standby power consumption| PS| N/A| W
Power consumption in off mode| Po| 0| W
Noise level (Highest setting)| LWA| 65| dB
Noise level (Lowest setting)| LWA| 60| dB

This appliance features a light source with an energy efficiency grade A. The appliance power consumption when off is 0 W, following the guidelines of EN 50564:2011 and the European regulations 1275/2008/EC and 801/2013/EC. The appliance doesn’t perform any function when connected to the mains. The switch/controller of the appliance was set to the Off position.

• Product reference: 02862
• Product name: Bolero Flux TLM 606500 Inox A
• Rated voltage: 220-240 V
• Rated frequency: 50 Hz
• Total power: 166,5 W
• Motor: 165 W
• Light bulb: 1 x 1.5 W
  • 650 m³/h air flow
• Bulb type: rectangular LED light
• Bulb dimensions: (120 x 33) mm
• ILCOS Code D: DBL-1.5-S-120/33

This appliance features a light source with an energy efficiency grade A.
The appliance power consumption when off is 0 W, following the guidelines of EN 50564:2011 and the European regulations 1275/2008/EC and 801/2013/EC. The appliance doesn’t perform any function when connected to the mains. The switch/controller of the appliance was set to the Off position.
Technical specifications may change without prior notification to improve product quality. Made in China | Designed in Spain

DISPOSAL

DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC APPLIANCES

This symbol indicates that, according to the applicable regulations, the product and/or batteries must be disposed of separately from household waste. When this product reaches the end of its shelf life, you should dispose of the cells/ batteries/accumulators and take them to a collection point designated by the local authorities.

Consumers must contact their local authorities or retailer for information concerning the correct disposal of old appliances and/or their batteries.
Compliance with the above guidelines will help protecting the environment.

TECHNICAL SUPPORT AND WARRANTY

• Cecotec shall be liable to the end user or consumer for any lack of conformity that exists at the time of delivery of the product under the terms, conditions, and deadlines established by the applicable regulations.
• It is recommended that repairs be carried out by qualified personnel.
• If at any moment you detect any problem with your product or have any doubt, do not hesitate to contact the official Cecotec Technical Support Service at +34 96 321 07 28.

COPYRIGHT

The intellectual property rights over the texts in this manual belong to CECOTEC INNOVACIONES, S.L. All rights reserved. The contents of this publication may not, in whole or in part, be reproduced, stored in a retrieval system, transmitted, or distributed by any means (electronic, mechanical, photocopying, recording or similar) without the prior authorization of CECOTEC INNOVACIONES, S.L.

www.cecotec.es

Cecotec Innovaciones S.L.
Av. Reyes Católicos, 60 46910, Alfafar (Valencia), Spain

References

• Cecotec Tienda Oficial | Envío Gratis | Mejor Precio

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>