anko 43233939 Bluetooth Speaker with RGB User Manual
- June 9, 2024
- Anko
Table of Contents
43233939 Bluetooth Speaker with RGB
User Manual
Includes
- Speaker
- Charging cable
- 3.5mm Aux Cable
Function overview
How to use the speaker: Specifications
Model No : 43233939
Bluetooth version : 5.0
Function Operation
Play/Pause :
Press button
Volume up/ down :
Click button
Answer /hang-up: Press button
Previous/Next: Long Press / button
RGB Light adjustment: Press button to change the light effect
Power ON/ OFF :
Switch the on/off button to power on/ off.
TWS Speaker function :
Press and hold button of one speaker, then two speakers automatically search
for connections.
After TWS mold activated , press and hold button of one of speakers , then TWS
mold end and the speaker can use separately.
Note : The TWS function is only available in Bluetooth mode.
Pairing the Speaker with Bluetooth® devices
Go to Bluetooth Settings on your Bluetooth device (phone, tablet, etc.)
- Turn the Bluetooth ON on your device
- Turn on the speaker , a voice prompt will alert you the speaker is ready to pair .
- On your Bluetooth Device, select the Bluetooth name : KM 43233939 on the list of available devices . (Trouble shooting tip: if the speaker do not connect to your device, turn the speaker OFF, turn your device’s Bluetooth OFF and then back ON, then repeat the pairing process) .
Note: Please enter the word “0000” and click OK if necessary.
Bluetooth Speaker will automatically connect back to the last connected
device . so after restarting, it will automatically connect back to
the previous device without re-pairing.
Phone calls
When there is an incoming call, the unit will pause the playback and
ring to alert you of the call.
To answer the call, press buttons;
To end a call, press buttons again.
To decline an incoming call, press and hold button for 2 seconds.
Playing music
Press button once to pause playing , press button once again to resume
playback. Long press the e button to play previous track , press the –
button shortly to turn down volume; Long press button shortly to play next
track , press + button shortly to turn up the volume .
TF Card Playing
Insert TF card when the speaker is ON and the voice prompt alerts , you can
play the music from your TF card.
Supported audio format: MP3,WAV .
Battery Charging
- Use the standard micro cable for power charging .
- The LED indicator will turn Red while charging and will tum OFF when fully charged. (Note: Before using for the first time, we recommend you fully charge the A full charge takes around 2 hours).
- When fully charged, unplug the charging cable from the power socket.
Note: When the battery is low , it will automatically turn off after voice prompt. Do not restart at this time, please charge in time.
Charging voltage: 5V d.c
Battery capacity: 800mAh
Working Distance: 10 meters
Music Time : 6 Hours
Talk time: 5 Hours
Standby time: More than 200 Hours
Charge time: 2 hours
Cable length: 30 cm
Frequency: 80HZ-16KHZ
Non-play when connected with device :
The speaker will not switch off automatically , please turn them off by hand
to save battery.
12 month warranty
Thank you for your purchase from Kmart.
Kmart Australia Ltd warrants your new product to be free from defects in
materials and workmanship for the period stated above, from the date of
purchase, provided that the product is used in accordance with the
accompanying recommendations or instructions where provided. This warranty is
in addition to your rights under the Australian Consumer Law.
Kmart will provide you with your choice of a refund, repair or exchange (where
possible) for this product if it becomes defective within the warranty period.
Kmart will bear the reasonable expense of claiming the warranty. This
warranty will no longer apply where the defect is a result of alteration,
accident, misuse, abuse or neglect.
Please retain your receipt as proof of purchase and contact our Customer
Service Centre on 1800 124 125 (Australia) or 0800 945 995 (New Zealand) or
alternatively, via Customer Help at kmart.com.au for any difficulties with
your product. Warranty claims and claims for expense incurred in returning
this product can be addressed to our Customer Service Centre at 690
Springvale Rd, Mulgrave Vic 3170.
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure
and compensation for any other reasonably foreseeable loss or damage. You are
also entitled to have the goods repaired or replaced if the goods fail to be
of acceptable quality and the failure does not amount to a major failure.
For New Zealand customers, this warranty is in addition to statutory rights
observed under New Zealand legislation.
WARNING:
- Battery cannot be subjected to high or low extreme temperatures, low air pressure at high altitude during use, storage or transportation.
- Replacement of a battery with an incorrect type that can result in an explosion or the leakage of flammable liquid or gas.
- Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
- Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas.
- A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
- This product shall not be connected to power supply source exceeding PS1 . Rated 5V d.c. 1A .
- Marking information is located at bottom of the unit.
- Please note the speaker working temperature is : 0-40 ℃.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>