WARWICK ACOUSTICS Bravura Electrostatic Headphones User Guide

June 6, 2024
WARWICK ACOUSTICS

WARWICK ACOUSTICS Bravura Electrostatic Headphones

WARWICK ACOUSTICS Bravura Electrostatic Headphones

**SETUP

WARWICK ACOUSTICS Bravura Electrostatic Headphones
1 WARWICK ACOUSTICS Bravura Electrostatic
Headphones 3 \(2\)**WARWICK ACOUSTICS
Bravura Electrostatic Headphones 3

**USAGE

WARWICK ACOUSTICS Bravura Electrostatic Headphones
4**

**CONNECTING TO M1 AMPLIFIER

WARWICK ACOUSTICS Bravura Electrostatic
Headphones 5**

www.warwickacoustics.com/headphones/support
www.warwickacoustics.com/headphones/support/manuals/WARWICK ACOUSTICS
Bravura Electrostatic Headphones 6

REGULATORY COMPLIANCE STATEMENTS FOR BRAVURA HEADPHONE

Federal Communications Commission (FCC) Compliance Notices Class B Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15, Subpart B of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  •  Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  •  Consult the dealer or an experienced radio/TV technician for help.

FCC Caution:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation
Canadian ICES Statements
Canadian Department of Communications Radio Interference Regulations. This digital apparatus does not exceed the Class B limits for radio-noise emissions from a digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications. This Class B digital apparatus complies with Canadian ICES-003. Règlement sur le brouillage radioélectrique du ministère des Communications. Cet appareil numérique respecte les limites de bruits radioélectriques visant les appareils numériques de classe B prescrites dans le Règlement sur le brouillage radioélectrique du ministère des Communications du Canada. Cet appareil numérique de la Classe B est conforme à la norme
NMB-003 du Canada.
European Union and European Fair Trade Association (EFTA) Regulatory Compliance
This equipment may be operated in the countries that comprise the member countries of the European Union and the European Fair Trade Association. These countries, listed below, are referred to as The European Community throughout this document: AUSTRIA, BELGIUM, BULGARIA, CYPRUS, CZECH REPUBLIC, DENMARK, ESTONIA, FINLAND, FRANCE, GERMANY, GREECE, HUNGARY, IRELAND,
ITALY, LATVIA, LITHUANIA, LUXEMBOURG, MALTA, NETHERLANDS, POLAND, PORTUGAL, ROMANIA, SLOVAKIA, SLOVENIA, SPAIN, SWEDEN, UNITED KINGDOM, ICELAND, LICHTENSTEIN, NORWAY, SWITZERLAND.

The EU Declaration of Conformity can be downloaded from our website at;
https://warwickacoustics.com/headphones/support/manuals/
The UKCA Declaration of Conformity can be downloaded from our website at;
https://warwickacoustics.com/headphones/support/manuals/

Warning!
This is a Class B product. In a domestic environment, this product may cause radio interference, in which case, the user may be required to take appropriate measures. This symbol on the product or its packaging indicates that this product must not be disposed of with your other household waste.Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of
waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste for recycling, please contact your local authority, or where you purchased your product. Please visit the following URL for a complete copy of the declaration of conformity and user manual: www.warwickacoustics.com/headphones/support

Warning!

  • Read and follow all warning notices and instructions marked on the product or included in the documentation.
  • Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
  • Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
  • Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
  • Since the Mains plug is used as the disconnection for the device, it must remain readily accessible and operable.
  • Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the device.
  • Unplug this device during lightning storms or when unused for long periods of time.
  • Do not open the chassis. There are no user-serviceable parts inside. Opening the chassis will void the warranty unless performed by a Warwick Acoustics service center or licensed facility.
  • Disconnect the external AC power supply line cord(s) from the mains power before moving the unit.
  • Only use attachments and accessories specified and/or sold by the manufacturer.
  • The Sonoma M1 & Bravura has no user-serviceable parts. To remove power from the unit, remove the power connector to ensure disconnection. Refer all servicing to qualified service personnel. Servicing is required when the device has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the device, the device has been exposed to rain or moisture, does not operate normally, or has been dropped.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals