joovy Noodle-V Kids Helmet Instruction Manual
- October 30, 2023
- Joovy
Table of Contents
joovy Noodle-V Kids Helmet
Product Information
This product is a helmet that is designed to be used for various outdoor activities such as biking, skateboarding, and rollerblading. The helmet comes with pads that can be adjusted to ensure a comfortable fit for the wearer. It also includes a sun visor that can be detached and reattached as needed. The snaps and plastic parts on the helmet should be inspected periodically to ensure that they are secured properly and not damaged or malfunctioning. The product is available in different styles and colors.
Product Usage Instructions
- Unpack the product and ensure that all the components are available.
- Adjust the pads inside the helmet to ensure a comfortable fit. Make sure that the helmet fits snugly on the head and does not move around.
- Attach the sun visor to the helmet by pressing it onto the snaps on the front of the helmet.
- If needed, replace any missing, broken, or worn components with original manufacturer’s components only.
- Inspect the snaps and plastic parts regularly to ensure that they are secured properly and not damaged or malfunctioning.
- To clean the helmet, use a damp cloth and mild soap. Do not use abrasive cleaners or solvents.
- If you have any difficulty with the assembly or use of this product, or if you have any questions regarding these instructions, please contact Team 432.
Safety and Warnings
WARNING
Read all instructions BEFORE assembly and USE of product. KEEP INSTRUCTIONS
FOR FUTURE USE.
- Failure to follow these warnings and the instructions could result in serious injury or death.
- Never use plastic bags or other plastic film not sold and intended for that purpose. They can cause suffocation.
- Discard all packaging materials properly. Do not allow children to play with them.
- Discontinue use if the helmet becomes damaged.
- Anything between child’s head and the helmet can reduce the protection. A cap, scarf, or even some high-volume hairstyles might allow the helmet to move during an impact. Barrettes, headphones, or anything else under child’s helmet can injure child if the helmet is impacted.
- Do not modify the helmet. No attachments should be made to the helmet except those recommended by the helmet manufacturer. This includes stickers or adhesive labels.
- Avoid choking. This helmet should not be used by children while climbing or doing other activities where there is a risk of hanging or strangulation if the child gets trapped while wearing the helmet.
- Impact forces can result in serious injury or death, even when a helmet is worn. A helmet cannot protect against all possible impacts. For maximum protection, the helmet must be fitted and attached properly to the wearer’s head in accordance with the instructions. After receiving an impact, the helmet may be damaged so that it is no longer adequate to protect the head against further impacts. This damage may not be visible on the helmet. If the helmet does receive an impact, it should be returned to the manufacturer for inspection and possible replacement or repair.
- The helmet can be damaged by contact with common substances such as solvents (ammonia) and cleaners (bleach), and this damage may not be visible on the helmet. Clean the helmet only with a wet cloth and soap.
- Wear the helmet low in the front to protect the forehead.
- Check the buckle and strap adjustments frequently.
- Store the helmet in a cool dry place.
- Obey all traffic laws when riding.
- Do not use the helmet for climbing.
- Not for use on a motorized vehicle.
- Do not leave the helmet in direct sun or where it can get overheated.
- For use by infants and toddlers when riding non-motorized wheeled vehicles intended for their use. (ASTM F1898-15)
- For use in recreational bicycling but not trick bicycling or downhill mountain bike racing. (ASTM F1447-18)
Please do not return this product to the store.
If you experience any of difficulty with the assembly or use of this product,
or if you have a question regarding these instructions, please contact Team
432 (page 9).
Please note: Styles and colors may vary.
Helmet Usage
Using your Helmet
- To ensure safe operation of your helmet please follow these instructions carefully.
Unpacking the Product
- Carefully remove the helmet from the box and plastic bag.
- Remove all cardboard packing materials from the product.
- Remove all plastic coverings from any areas of the product and discard them properly. Do not allow children to play with them.
Adjusting the Helmet
- When you place your helmet on your head, it should sit low and flat, not tilted forward or backward. The brim of the helmet should be about two fingers width (approx. 1/2 to 1 inch) above the eyebrows.
- Slide each “Y” adjuster individually until straps have a “V” shape underneath each ear.
- To adjust the tightness of the helmet, turn the adjustment dial (located at the rear of the helmet) until the head band fits snugly around the head. Clockwise tightens, counterclockwise loosens.
- Connect the chin strap buckle snugly underneath the chin and adjust the chinstrap making sure to allow the mouth to open and close comfortably.
Pad Replacements
- If the pads (found attached to Velcro strips inside of the helmets) become unusable please call Joovy customer service for replacements pads.
Detaching/Reattaching the Sun Visor
The sun visor is already attached to the helmet.
- To remove the visor, carefully pull the visor away from the snap on one side of the helmet and then pull it away from the snap on the other side.
- To reattach the visor, align the snaps on each side of it with the snaps on the helmet and carefully press them together so that the visor is secure.
Care & Maintenance
Maintenance
All of the snaps and plastic parts on the helmet should be inspected
periodically to ensure that they are secured properly and not damaged or
malfunctioning. Any missing, broken, or worn components should be replaced
immediately, and the helmet should not be used until they are replaced. Only
original manufacturer’s components should be used. If needed, please contact
Joovy at our toll-free phone number (877) 456-5049.
Cleaning
Only use a soft towel, soap and warm water to clean your helmet. You can
remove and clean the pads by hand and re-insert them after they air dry. The
use of solvents and solvent based paints or similar solvent-based materials
can damage your helmet. We recommend not making any modifications to or
decorating the helmet after you have purchased it. The addition of stickers
and painting the surface is not recommended. The helmet can also be damaged if
exposed to extreme changes in hot or cold temperatures. Store your helmet in a
cool, dry place.
Team 432
Please do not return this product to the store.
If you experience any of difficulty with the assembly or use of this product,
or if you have a question regarding these instructions, please contact Team
432:
United States
Joovy
(877) 456-5049, 8:30 am – 5:00 pm Central Time
joovy.com LiveChat, 8:30 am – 9:00 pm Central Time
customerservice@joovy.com
Canada
Elfe Juvenile Products
(800) 667-8184, 8:30 am – 5:00 pm Eastern Time
service@elfe.ca
SHOP ONLINE: JOOVY.COM
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>