POWERTECH SL4120 LED Flood Light Solar Rechargeable Instruction Manual
- June 12, 2024
- POWERTECH
Table of Contents
POWERTECH SL4120 LED Flood Light Solar Rechargeable
Product Information
The SL4120 is a 100W LED Flood Light Solar Rechargeable. It is designed to provide bright and efficient lighting using solar power. The product comes with a lamp, solar panel, remote controller, support bracket, wall bolts, and an operating manual.
BOX CONTENTS
- Lamp
- Solar Panel
- Remote Controller
- Support Bracket
- Wall Bolts
- Operating Manual
Installation
-
Take out the lamp from the packaging.
-
Press the AUTO button on the remote controller to activate the primary version.
-
Press the button above the AUTO button.
-
The light should turn on automatically.
-
Connect the waterproof connector correctly and place the solar panel towards sunlight. The light will automatically turn off, and the charging indicator will flash regularly, indicating that the solar panel is charging the batteries correctly. Make sure to align the arrows on the connector correctly.
-
Fix the product on the wall using the supplied wall bolts. The suggested installation height is between 3-6 meters.
-
Ensure that the solar panels are installed at the correct angle for your country and in the correct direction for your hemisphere.
Also, make sure that there are no obstacles blocking sunlight, such as trees, shadows, or buildings. Unobstructed sunlight is necessary for proper charging. -
Tips:
- Install the solar panel at an angle of 5-10 degrees south to west and 35 degrees with the horizontal plane.
- Affix the panel firmly to a permanent structure to prevent it from being affected by winds or movement.
- Use the supplied remote controller to adjust the brightness and duration time of the light according to your requirements. Note that some keys on the remote may be reserved for use with other models.
Once the Waterproof connector is connected correctly,place the Solar Panel towards the Sunlight.The light should automatically turn off and the Charging indicator (See position Below) will flash regularly. This means the Solar panels is charging the batteries correctly.
(Please use arrows on the connector to align correctly)
Remote Controller Instructions
The remote controller operates in light-operated mode. Once the waterproof wiring connector is connected and tightened, pressing the AUTO key will turn on the light automatically when darkness falls and turn it off to charge once the sun rises.
Light-operated Mode.
Once the waterpoof Wiring Connector is connected and tightened, by pressing
the [AUTO] key,the light will automatically turn on when darkness falls,and
will turn off to charge once the sun rises.
Remote Controller Functions:
Important Notification
- Never connect 220VAC to this unit as it may damage the lamp and pose a risk of personal injury or electric shock.
- Ensure that the installation is firmly affixed to a solid and permanent fixture to avoid falling and causing injury.
- Disassembling the lamp, panel, or any of its parts will void the warranty immediately.
- Clean the solar panels regularly to remove dust, debris, and bird droppings. This will maintain the panels’ highest efficiency for charging the batteries.
Distributed by: Electus Distribution Pty Ltd
Address: 46 Eastern Creek Dr, Eastern Creek NSW 2766 Australia
Phone: 1300 738 555 (Int’l +61 2 8832 3200)
Fax: 1300 738 500
Website:
www.electusdistribution.com.au
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>