CEEK 4D Advanced Headphones User Guide

CEEK 4D Advanced Headphones

On-Ear Headphones

1. Compact fold
   Fold inwards to store away.

2. Adjustability
   Slide the headband to adjust the size.

3. Bluetooth
   To connect your headphones to your Bluetooth device, hold onto the power button for 5-7 seconds and scan for device. Select CEEK 4D Headphones from the menu. The status LED will blink blue repeatedly until paired, then the status will flash blue once paired.

RF WARNING STATEMENT
The device has been evaluated to meet the general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

TouchPad
Use the touchpad to take calls, play, skip and change the volume of the music. Move your finger, or touch the center of the logo as shown below.

Touch control instruction

(Right side panel of headphones):
Touch then sweep according to the directions below.

• Basic function/Operation for Bluetooth

• Power Button

• Power on

  • Press and hold for 3s when the headphone power off.
  • Blue LED flashes 3 times
  • Power on

• Power off

  • Press and hold for 3s when the headphone power on.
  • Blue LED flashes 3 times
  • Poweroff

• Pairing

  • Press and hold for 5s-7s when the headphone power off.
  • Red and blue LED fast flashes alternately
  • Pairing

• Pairing successfully

  • Blue LED flashes 1 time in 7s
  • connected

• No pairing.or pairing failure

  • Blue LED flashes 1 time in 3 seconds

• Disconnected

  • Disconnection due to being out of bluetooth signal range.
  • Blue LED flash 1 time in 3 seconds
  • Disconnected

• Low Battery

  • Low battery warning: when voltage drops to 3.3v.
  • Red LED flashes slowly
  • Dodidodido per 1min

• Auto Power

  • Auto power off when disconnected for up to 10 mins.

• Charging

  • Headphones will turn off automatically once charging starts.
  • Solid red

• Connected

  • Auto re-connect
    The headphone will reconnect the last connected device automatically after powering on and the device in operating range.

  • Connected

• Auto Power

  • Auto power off when voltage drops to 3v.
  • Goodbye

• Full charged

  • (Voltage=4.2v) Fully charged
  • Solid red

• Vibration controller

  • Adjust vibration intension
  • Dial-up or down

Media play control for Bluetooth

Volume

Volume up

• Touch then sweep. On the iPhone smartphones, One sweep means one volume level.
  • “Du” sound at max. volume

Volume down

• Touch then sweep from bottom to top. On iPhone smartphones, One sweep means one volume level.
  • “Du” sound at min. volume

Music Mode

Play/Pause

• Double-touch the center of the right panel.

Previous track

• Touch then sweep from rear to front.
  • Di

Next track

• Touch then sweep from front to rear.
  • Di

Siri on iPhone/iPad
Press and hold for 1s-2s, or say “hey Siri” directly.

• same as iPhone/iPad

Phone call management for Bluetooth

Call Mode

Reject

• Press and hold the power button for about 2s to reject an incoming call.

Pick up

• Press the power button to answer incoming calls.

Hung up

• Press the power button to hang up a call.

Cables

Audio cable

1. To use an audio cable, you do not need to tum on the headphones. When the power is on, you can also enjoy the vibrational effects when the audio cable is plugged in.
2. Plugging the audio cable will disable Bluetooth. Bluetooth will be enabled again once the audio cable is pulled out, bluetooth is enabled before plugging into the audio cable, you can still enjoy your music via the audio cable.
3. 40 sound is always activated when playing music via Bluetooth. Using an audio cable will not disable the 4D sound when headphone is powered on.
   Detachable MIC can only be enabled by Bluetooth. Plugging in the audio cable will disable the detachable mic.

Charging Cable

Audio Cable

Button:
When a mobile phone plays music using an audio cable, single-click to play or pause, double-click to the next track, and triple-click to the previous track. If a call comes in, a single click to pick up, press, and hold for 2s to reject.

FCC STATEMENT

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency general and. if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there iS no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions

1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

www.4dheadphones.com.

References

• CEEK - Watch Music Concerts Online, Virtual Reality Live Streaming | Full HD Concerts | 360VR Live| 3D Concerts |Phone VR App |VR Concerts | Live Virtual Concerts
• Get your CEEK VR Headset now!

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>