joovy Caboose-S RS Car Seat Adpater Maxi Cosi Instruction Manual
- June 5, 2024
- Joovy
Table of Contents
joovy Caboose-S RS Car Seat Adapter Maxi Cosi
Safety and Warnings
WARNING
Please read these instructions carefully before use and keep them for future reference.
- For use ONLY on the Joovy Caboose S Stroller.
- ALWAYS install the infant car seat so that the child is facing toward the rear (handlebar) of the stroller.
- ALWAYS position the infant car seat so that it securely snaps into the infant car seat adapters.
- The infant car seat adapter is for use ONLY with specific infant car seats. DO NOT use other infant car seat models that are not on the Car Seat Compatibility List.
- This product is not a toy. DO NOT allow children to play with it.
IMPORTANT NOTE
When using your stroller as an infant car seat, the following are the
compatible infant car seat models that the Caboose S will accommodate:
Cybex® Aton 2 Cybex® Aton Q Cybex® Cloud Q Maxi-Cosi® Mico Maxi-Cosi® Mico 30
Maxi-Cosi® Mico Max 30 Maxi-Cosi® Mico AP Maxi-Cosi® Mico NXT Maxi-Cosi® Pebble Nuna® Pipa
Additional Accessories (sold separately)
Customize your ride with a number of optional accessories for added
functionality. All accessories are sold separately.
Rear Seat
• 3 recline position
• High, middle or front positions
Removable/machine-washable seat fabric
Cup Holder
- Includes clear inner cup
- Deep cup holder
Bassinet
- For use in the front position
- Ultra-soft interior and mattress pad
Adjustable ventilated canopy
Rain Cover
- Custom fit
- All-weather protection
- Removable/dishwasher-safe
- Zippered cover
- Machine-washable mattress pad cover
- Birth to 20 lbs.
- Bassinet Adapters required
- Vented
- Easy to install
Parent Organizer
- Large neoprene organizer
- Two Insulated cup holders
- 7 individual compartments; one zippered pocket
Tote
-
Largest tote, 14″ deep
-
Carries up to 25 lbs.
-
Four interior mesh pockets
Handles -
Snap-on handles
-
Easy to install
-
Rear position
-
Easy click-in installation
-
Easily removed and carried as an independent tote.
-
Front and rear-facing adjustment
-
Large holding area
Bassinet Adapters
- Required for bassinet use on the front position
Car Seat Adapters-Britax/B.O.B. B-Safe
- Rear-facing
- Front and rear positions
- Click-in installation
Car Seat Adapter-Maxi-Cosi/Cybex/Nuna
- Rear-facing
- Front and rear positions
- Click-in installation
Car Seat Adapters
- Rear-facing
- Front and rear positions
- Click-in installation
Car Seat Adapter-Universal
- Rear-facing
- Front and rear positions
- Click-in installation
For the most updated list of compatible infant car seats, please check our website at https://joovy.com/car-seat-compatibility-chart/
Assembly and Usage
- To use the car seat adapter in the front position, first ensure the front seat is removed.
- Line up the male brackets on the bottom of the car seat adapter with the female brackets on the stroller frame. (1) Make sure the arrow mark on the adapter faces backward.
- Push down on each side of the car seat adapter until both brackets click into place. (2) Pull up the car seat adapter on both sides to ensure it is secured.
- The car seat can only face backward.
- Hold the car seat by the carry handle and lower the car seat onto the stroller so that the bracket on the car seat latches onto the car seat adapter. Pull up on the car seat to ensure it is secure.
- To remove the car seat, press the release buttons on each side of the car seat and lift it up.
- To remove the adapters from the stroller, press each side trigger and pull it up off the stroller. (3)
- To use the car seat adapter in the rear position, ensure the front seat is fully upright.
- Line up the male brackets on the bottom of the car seat adapter with the female brackets on the stroller frame. (4) Make sure the arrow mark on the adapter faces backward.
- Push down on each side of the infant car seat adapter until both brackets click into place. (5) Pull up on the infant car seat adapter on both sides to ensure it is secured.
- The car seat can only face backward.
- Hold the car seat by the carry handle and lower the car seat onto the stroller so that the hook on the rear of the car seat latches onto the car seat adapter. Pull up on the car seat to ensure it is secure.
- To remove the car seat, press the release buttons on each side of the car seat and lift it up. (6)
- To remove the adapter from the stroller, press the trigger on the adapter and pull it up off the stroller.
NOTE: The stroller can be folded with the infant car seat adapters when it’s installed in the front or rear position.
Configurations
Customer Service
Please do not return this product to the store.
If you experience any difficulty with the assembly or use of this product, or
if you have a question regarding these instructions, please contact our
Customer Service Department:
United States
- Joovy
- 877-456-5049, 8:30 am – 5:00 pm Central Time
- joovy.com LiveChat, 8:30 am – 9:00 pm Central Time customer service.
- Canada
- Elfe Juvenile Products
- 800-667-8184, 8:30 am – 5:00 pm Eastern Time service@elfe.ca
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>