joovy 915X RS Rear Seat Instruction Manual

joovy 915X RS Rear Seat

Safety and Warnings

WARNING

Please read these instructions carefully before use and keep them for future reference.

• For use ONLY on the Joovy Caboose RS stroller.
• This seat is not suitable for children under 6 months.
• The maximum height of a child the product is designed to carry is 44 in (111.8 cm).
• The maximum weight of a child the product is designed to carry is 55 lbs. (25 kg).
• When used for carrying 2 children at the same time, the total weight of all children must not exceed 110 lbs. (50 kg). Exceeding this total weight will cause excessive wear and stress on the stroller and may cause a hazardous unstable condition.
• Never leave child unattended.
• Avoid serious injury from falling or sliding out. Always use the restraint system.
• This product is not a toy. Do not allow children to play with it.

Please do not return this product to the store.
If you experience any of difficulty with the assembly or use of this product, or if you have a question regarding these instructions, please contact Department 432.

Additional Accessories (sold separately)

Customize your ride with a number of optional accessories for added functionality. All accessories are sold separately.

Rear Seat

• 3 recline position
• High, middle or front positions
• Removable/machine-washable seat fabric

Cup Holder

• Includes clear inner cup
• Deep cup holder
• Removable/dishwasher-safe

Bassinet

• For use in the front position
• Ultra-soft interior and mattress pad
• Adjustable ventilated canopy
• Zippered cover
• Machine-washable mattress pad cover
• Birth to 20 lbs.
• Bassinet Adapters required

Rain Cover

• Custom-fit
• All-weather protection
• Vented
• Easy to install

Handles

• Snap-on handles
• Easy to install
• Front and rear facing adjustment
• Large holding area

Bassinet Adapters

• Required for bassinet use on front position

Car Seat Adapters-Britax/B.O.B. B-Safe

• Rear-facing
• Front and rear positions
• Click-in installation

Car Seat Adapter-Maxi-Cosi/Cybex/Nuna

• Rear-facing
• Front and rear positions
• Click-in installation

Car Seat Adapter-Maxi-Cosi/Cybex/Nuna

• Rear-facing
• Front and rear positions
• Click-in installation

Car Seat Adapter-Maxi-Cosi/Cybex/Nuna

• Rear-facing
• Front and rear positions
• Click-in installation

For the most updated list of compatible infant car seats, please check our website at https://joovy. com/car-seat-compatibility- chart/

Assembly and Usage

IMPORTANT NOTE: Please refer to the end of this manual for all photos that are referenced in parentheses in the instructions below.

Unpacking the Product

• Remove everything from the box – rear seat and documents (not shown).
• Discard all packaging materials properly including plastic coverings.
• DO NOT allow children to play with any packaging materials.

Installing/Removing the Rear Seat

• Unbuckle the bench seat harness (1) and store the waist strap in the pocket on the front seat back. (2)
• Pull or push outward on the clamps on each side of the bench seat to unlock them. (3)
• Push the bench seat toward the front of the stroller so that the plastic brackets on the lower frame bar are exposed. (4)
• Remove the crotch strap by turning the plastic end sideways and pushing it through the slot on the seat bottom and the seat. (5)
• Put the crotch strap aside for a moment until the rear seat is installed.
• Line up the male brackets on the rear bottom of the rear seat (6) and insert them into the female bracket on the stroller frame. (7)
• On each side of the rear seat, lift up the locking device (8) and move it over the plastic bracket on the upper frame bar. (9)
• Press the locking device down onto this bracket on BOTH sides until it locks securely in place. (10)
• Slide the bench seat toward the rear of the stroller until it touches the rear seat adapter. (11)
• To lock the bench seat, push the plastic clamps upward from EACH side of the bench seat and press them inward to lock them securely. (12) Ensure the seat is secured.
• Insert the plastic end of the crotch strap through the slot in the rear seat (13) and down through the bench seat and seat bottom (14), then turn the plastic end sideways to secure it.
• Locate the elastic loops underneath the rear seat.
• Hook the 4 elastic loops onto the hooks under the bench seat base. (15)
• To remove the rear seat, simply reverse the disassembly steps.

Securing the Rear-Seated Child

• There are three height adjustment positions for the shoulder harness. Adjust the height to the closest height above your child’s shoulders.
• To remove the shoulder harness, first unzip the fabric on the back of the seatback. (16)
• Turn the plastic ends of both straps sideways and push them through the slots in the seatback and the seat fabric. (17)
• Reattach the harness at the proper height by reinserting the plastic ends of both straps through the slots. Ensure both straps are at the same height.
• Rezip the zipper on the back of the seatback.
• To unlatch the buckle, press the buttons on both sides and remove the male ends of each side. (18)
• Carefully place the child in the seat with the shoulder straps and pads over their shoulders and chest. Then place the crotch strap between the child’s legs.
• Combine the shoulder/waist buckles together, then place the crotch buckle on top of the combined buckles until all parts are in place. (19)
• Tighten the waist belt to be snug around the child’s waist.
• The shoulder, waist, and crotch straps may be adjusted using the sliding plastic rings.

Rear Seat Recline Positioning
The rear seat has 3 recline positions.

• To adjust, pull up on the recline mechanism on the top of the seatback and pull the seatback downward to the desired position. (20) Ensure that the recline mechanism has engaged.
• For a more upright seat position, push the seatback upward.
  WARNING: Whether the seatback is upright or reclined, ALWAYS make certain that the recline mechanism is engaged before placing the child into the seat.
  WARNING: The rear seat is not suitable for children under 3 months. Avoid serious injury from falling or sliding out. Always use the restraint system.

Removing the Rear Seat Fabric

NOTE: The rear seat fabric is removable for washing.

• Remove the rear seat from the stroller (see above).
• Unzip the fabric on the seatback. (21)
• Release the Velcro® at the bottom of the seatback. (22)
• Locate the two supporting straps wrapped around the base of the seatback side frame bars.
• Remove one strap by sliding it through the rectangular metal ring. (23)
• Repeat on the other side.
• Remove the 2 fabric straps on the bottom sides of the seatback from the metal knobs. (24)
• Remove the seat fabric from the frame.
• Remove both shoulder straps, both waist straps and the crotch strap by turning the plastic ends sideways and pushing them completely through the slots in the plastic seat board and fabric. (25)
• Remove the plastic seat board from the fabric pocket at the TOP of the seat. (26)
• To reassemble the rear seat, simply reverse the disassembly steps. Ensure all zippers and straps are securely closed.

Configurations

Team 432

Please do not return this product to the store.
If you experience any of difficulty with the assembly or use of this product, or if you have a question regarding these instructions, please contact our Team 432:

United States Joovy
877-456-5049, 8:30 am – 5:00 pm Central Time
joovy.com LiveChat, 8:30 am – 9:00 pm Central Time customerservice@joovy.com

Canada
Elfe Juvenile Products
800-667-8184, 8:30 am – 5:00 pm Eastern Time service@elfe.ca

References

• Home New 2023 - Joovy

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>