DORR SLR-12 Bi-Color LED Ring Light Instruction Manual

DORR SLR-12 Bi-Color LED Ring Light

THANK YOU for choosing this DÖRR quality product.
Please read the instruction manual and safety hints carefully before first use.
Keep this instruction manual together with the device for future use. If other people use this device, make this instruction manual available. This instruction manual is part of the device and must be supplied with the device in case of sale.
DÖRR is not liable for damages caused by improper use or the failure to observe the instruction manual and safety hints.

SAFETY HINTS

• Do not look directly into the LED and do not direct the light beam into the eyes of humans or animals. CAUTION: Looking into the light for an extended period of time may cause an irreversible damage to the retina.
• Only for the illumination for photographic purposes. Not suited for permanent room lightning.
• Protect the device from rain, moisture, direct sunlight and extreme temperatures.
• Turn off the light after use and disconnect from power source.
• Do not operate or touch the device with wet hands.
• Protect the device against impacts. Do not use the device if it has been dropped. In this case a qualified electrician should inspect the device before you use it again.
• Do not attempt to repair the device by yourself. Risk of electric shock! When service or repair is required, contact qualified service personnel.
• People with physical or cognitive disabilities should use the device with supervision.
• People with cardiac pacemakers, defibrillators or any other electrical implants should maintain a minimum distance of 30 cm, as the device generates magnetic fields.
• This device is not a toy. To prevent accidents and suffocation keep the device, the accessories and the packing materials away from children and pets.
• Protect the device against dirt. Never use aggressive cleansing agents or benzine to clean the device. We recommend a soft, slightly damp microfiber cloth to clean the outer parts of the device. Before cleaning make sure to switch off the device and take off from power supply!
• Store the device in a dust-free, dry and cool place.
• If the device is defective or without any further use, dispose of the device according to the Waste Electrical and Electronic Equipment Directive WEEE. For further information, please contact your local authorities.

PRODUCT DESCRIPTION

•  LED selfie dual ring light for optimal illumination from two sides
• 3 light modes: cold light, mixed light, warm light
• Brightness can be dimmed in 10 steps
• With variable smartphone holder and useful table clamp

OVERVIEW

1. 2x Gooseneck with LED ring light
2. Gooseneck with smartphone holder
3. Smartphone holder
4. Table clamp
5. USB cable
6. USB-A plug
7. Control unit
8. Button +
9. Button –
10. Shift button colour temperature
11. On/Off button

MOUNTING

1. Fix the table clamp (04) to a table or similar object (maximum opening of table clamp approx. 5,5cm).
2. Connect the USB-A plug (06) to a PC/Notebook.
3. Slide the clamps of the smartphone holder (03) apart, insert your smartphone and release the clamps of the smartphone holder carefully (03) to fix the smartphone.
4. Use the flexible goosenecks (01 + 02) for the perfect position and angle of the lights or the correct angle of the smartphone.

OPERATION

1. To switch on the ring lights, press the On/Off button (11).

2. With the shift button for colour temperature (10) you can switch between warm light (approx. 3.800 K), cold light (approx. 6.800 K) and mixed light (approx. 4.500 K).

3. Press the button – (09) to reduce the brightness in 10 steps.
   Press the button + (08) to increase the brightness in 10 steps.

4. After use, switch the ring light off with button On/Off (11) and disconnect from USB power source.

CLEANING AND STORAGE

Never use aggressive cleansing agents or benzine to clean the device. We recommend a soft, slightly damp microfiber cloth to clean the outer parts of the device. Before cleaning make sure to switch off the device and take off from power supply! Store the device in a dust-free, dry and cool place. This device is not a toy – keep it out of reach of children. Keep away from pets.

TECHNICAL SPECIFICATIONS

Dörr GmbH reserves the right to make technical changes without notice.

SCOPE OF DELIVERY

1x LED selfie dual ring light with table clamp, USB cable with control unit and smartphone holder
1x Safety hints

DISPOSAL, CE MARKING

DISPOSAL OF BATTERIES/ACCUMULATORS

Batteries are marked with the symbol of a crossed-out bin. This symbol indicates that empty batteries or accumulators which can no longer be charged should not be disposed of with household waste. Waste batteries may contain harmful substances that can cause damage to health and to the environment. Please use the return and collection systems available in your country for the disposal of the waste batteries.

WEEE INFORMATION

The Waste Electrical and Electronic Equipment Directive (WEEE Directive) is the European Community directive on waste electrical and electronic equipment, which became European law in February 2003. The main purpose of this directive is to prevent electronic waste. Recycling and other forms of waste recovery should be encouraged to reduce waste. The symbol (trash can) on the product and on the packing means that used electrical and electronic products should not be disposed of with general household waste. It is your responsibility to dispose of all your electronic or electrical waste at designated collection points. Disposing of this product correctly will help to save valuable resources and it is a significant contribution to protect our environment as well as human health. For more information about the correct disposal of electrical and electronic equipment, recycling and collection points please contact your local authorities, waste management companies, your retailer or the manufacturer of this device.

ROHS CONFORMITY

This product is compliant with the European RoHS directive for the restriction of use of certain hazardous substances in electrical and electronic equipment and its amendments.

CE MARKING
The CE marking complies with the European standards and indicates that the product meets the requirements of the applicable EU directives.

References

• Photography & Videography & Lifestyle
• Photography & Videography & Lifestyle

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>