Oasis F-2307 Surface Mounted Sports Bottle Filler Owner’s Manual
- June 11, 2024
- Oasis
Table of Contents
Oasis F-2307 Surface Mounted Sports Bottle Filler
Product Information
Specifications:
- Filtration: Option to add filtration
- Activation By: Manual Activation
- Mounting Type: Wall Mounted
- Chilling Option: Non-refrigerated
- Full Load Amps: 0
- Rated Watts: 0
- Approx. Net Weight: 15 lbs.
- Installation Location: Indoor
Product Usage Instructions
Installation:
- Ensure the unit is placed on a suitable wall surface.
- Make sure the water inlet with strainer is connected to a 3/8 O.D. water supply.
- Install necessary plumbing components like stop valve, trap, and pipe connector to the waste line.
Maintenance:
- Regularly clean the unit to prevent build-up and ensure proper operation.
- Check for any leaks or malfunctions periodically.
Safety Precautions:
- Do not attempt to disassemble or repair the unit yourself. Contact a professional if needed.
- Keep the unit away from direct sunlight and extreme temperatures.
PWSMSBF
Suggested Specification
Model PWSMSBF is a non-refrigerated sports bottle filler and delivers ambient
water. The unit shall have push-button manual activation with laminar flow.
VersaFiller alcove and cabinet shall be stainless steel. Key VersaFiller
components contain Freshield®, which utilizes a silver-based antimicrobial
compound to protect the surfaces from discolouration, odours and degradation
caused by the growth of micro-organisms and mildew. Shall be surface mounted
in design. Shall comply with ANSI 117.1 and ADA. Shall be listed by
Underwriters Laboratories to US and Canadian standards. Shall comply with
NSF/ANSI 61 and NSF/ANSI 372.
- Features
- Built-in 100-micron strainer stops particles before they enter the waterway
- Waterways are lead-free in materials & construction
- Low profile design saves space
- Heavy-duty galvanized steel frame
- Mechanically activated push button
- Logos permanently formed into the alcove and stainless steel wrapper
- Surface mount frame assembly
- Filtration: Option to add filtration
- Activation By: Manual Activation
- Mounting Type: Wall Mounted
- Chilling Option : Non-refrigerated
- Full Load Amps: 0
- Rated Watts 0
- Approx. Net Weight: 15 lbs.
- Installation Location: Indoor
Note : Chiller units sold for these models must be remotely located, as they do not fit into the housing of the unit, or inside the wall cavity of a typical stud wall.
WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov
-
Installation
- Prior to rough-in consult with local, state, and federal codes for proper mounting height.
- Surface mount frame included, but water supply and drain required
- Shipped with complete instructions and wall mounting brackets.
-
Finishes
VersaFiller cabinet finish is stainless steel -
Options
- Remote Chiller
- OASIS Versafilter lll Kit 041253-001
-
Limited 1-Year Warranty
- (Continental limits of the United States and Canada)
- One year on components parts. Detailed warranty certificate enclosed with each water cooler; sample available upon request.
-
Export Warranty
One year on components parts. Detailed warranty certificate enclosed with each drinking fountain; sample copy available upon request. -
Certifications/Compliance
- Certified to UL 399 and CAN/CSA C22.2 No.120 (electric water coolers only)
- Product Certified to NSF/ANSI Standard 61-G & 372 and conforms with the lead content requirements for “Lead-Free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act
- These water coolers comply with the requirements of ADA (Americans with Disabilities Act) when properly installed
ROUGHING IN AND DIMENSIONAL DRAWING
NOTES:
- RECOMMENDED ADULT BARRIER-FREE HEIGHT INSTALLATION SHOWN. ADJUST VERTICAL DIMENSIONS AS REQUIRED TO COMPLY WITH FEDERAL, STATE AND LOCAL CODES.
- 3/8 O.D. WATER INLET WITH STRAINER PROVIDED.
- STOP VALVE, TRAP, PIPE CONNECTOR TO WASTE LINE AND 3/8 COMPRESSION FITTING NOT PROVIDED.
- ALL DIMENSIONS ARE IN INCHES. DIMENSIONS IN BRACKETS [] ARE IN MILLIMETERS.
WE KNOW WATER.
- OASIS INTERNATIONAL
- 222 East Campus View Blvd., Columbus, OH 43235
- www.oasiscoolers.com
- 1-800-646-2747
OASIS is a registered trademark of LVD Acquisition, LLC dba OASIS International, © 2022 LVD Acquisition | AS0080-F-2307
FAQ
Q: Can I install a chiller unit within the housing of the Aquapointe
Surface Mount?
A: No, chiller units must be remotely located as they do not fit into the
housing of the unit.
Q: What is the warranty coverage for this product?
A: The product comes with a limited 1-year warranty covering component parts.
Detailed warranty certificates are provided with each unit.
Q: Is the Aquapointe Surface Mount suitable for outdoor installation?
A: No, the installation location recommended for this product is indoors.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>