LKTOP Mini 3 Pro 30W USB-C Charger User Manual

LKTOP Mini 3 Pro 30W USB-C Charger User Manual

30W USB-C Charger

Disclaimers

Thank you for purchasing the LKTOP 30W USB-C Charger (hereinafter referred to as the “Charger”). Before using the charger, please read this statement carefully. Once using this product, it is considered as recognition and acceptance of the entire content of this statement. Please strictly follow these instructions when using this product and pay attention to precautions. LIKI not be responsible for any direct or indirect losses or injuries caused by the user’s improper use of the charger.

LKTOP is a registered trademark of LIKI. The product names and brands mentioned in this article are trademarks or registered trademarks of their respective companies. This product and manual are copyrighted by LIKI. Without permission, no reproduction or reproduction is allowed in any form. The use of this product and manual will not be subject to patent liability, and the final interpretation rights of this document and all related documents of this product belong to LIKI.

There may be differences in disclaimers for different language versions. The Chinese version shall prevail in China, and the English version shall prevail in other regions.

Precautions for product use

• Before using this product, please carefully read and follow all safety and compliance instructions related to this article and this product.
• Do not use the charger in direct sunlight, rain, or damp environments.
• The charger should be kept away from hazardous materials such as heat sources, high pressure, water, flammable gases, corrosive agents, etc.
• In case of fire, please use dry powder fire extinguishers correctly to extinguish the fire. Using liquid type fire extinguishers may pose a risk of electric shock.
• It is strictly prohibited to use chargers in lightning and thunderstorm weather.
• Keep the interior of the charger dry and avoid entering liquids such as water and oil.
• Please pay attention to insulation and fire prevention when using.
• When charging, please stay away from combustible materials and do not place the charger or battery on the carpet for charging.
• Do not touch the metal terminals of the battery interface with your hands or other objects. If there are foreign objects attached to the metal terminals, please wipe them clean with a dry cloth when the power is turned off.

Product Introduction

LKTOP 30W USB-C Charger is a Type-C fast charging charger with a continuous 30W power output, making it more suitable for charging electronic products such as drones, handheld camera, and sports cameras.

Product instructions

Using a charger

1. Connect the charger to an AC power source (100-240V, 50/60 Hz).
2. With the intelligent flight battery turned off, connect the aircraft to the charger.
3. In the charging satus, the intelligent flight battery level indicator light will cycle and indicate the current battery level.
4. When all the battery indicator lights are off, it indicates that the intelligent flight battery is fully charged. Please disconnect the aircraft and charger to complete charging.

Charging for the charging butler
DJI Mini 4 Pro/Mini 3 Series Bi-directional Charging Manager, paired with a 30W USB-C charger, can connect three Mini 4 Pro intelligent flight batteries or three DJI Mini 4 Pro/Mini 3 Series Intelligent Flight Batteries Plus, and charge the batteries in sequence according to their remaining battery level. The time to fully charge a single Mini 4 Pro intelligent flight battery is approximately 58 minutes, and the time to fully charge a single DJI Mini 4 Pro/Mini 3 Series Intelligent Flight Batteries Plus is approximately 1 hour and 18 minutes.

Charging steps
Insert the intelligent flight battery into the DJI Mini 4 Pro/Mini 3 series bidirectional charging manager, connect the LKTOP 30W USB-C charger to the power interface to an AC power source (100-240V, 50/60Hz), and then use the USB-C cable to connect to the charging manager. The charging manager will charge the battery in descending order based on its charge level. During the charging process, the charging manager status indicator light displays the current battery level status. Wait for the device to fully charge(When the intelligent flight battery is fully charged, all the battery indicator lights turn off.) Please unplug the corresponding device in a timely manner and turn off the charger power.

Charging the remote controller

1. Connect the charger to an AC power source (100-240V, 50/60 Hz).
2. Connect the remote controller interface to the charger output port.

FIG 4 Charging the remote controller.JPG

Basic product parameters

PS: The weight/size information shown on this page is manually measured and is for reference only. Actual data may vary due to individual differences, environmental changes, or product batches, iterations, and other reasons, and the actual product shall prevail.

© 2023 LKTOP. All rights reserved.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>