Oatey 34440 Compression Tee AA Hammer Arrestor Instructions
- June 4, 2024
- Oatey
Table of Contents
Oatey 34440 Compression Tee AA Hammer Arrestor
INSTRUCTION
- Turn off the water supply to the valve.
- Cut water line and place supplied compression nut and ferrule ring on both ends of the pipe.
- Insert both ends of the pipe into the openings of the Quiet Pipes® Hammer Arrestor and secure compression nuts to the hammer arrestor using wrenches. Use one wrench to stabilize the hammer arrestor and prevent movement while using another to tighten compression nuts.
- Turn the water on and check for leaks.
©2021 Oatey SCS. All Rights Reserved. This information is based on data believed to be reliable but Oatey makes no warranties, express or implied, as to its accuracy and assumes no liability arising out of its use. The data listed falls within the normal range of product properties but should not be used to establish specification limits or used alone as the basis of design. Oatey’s liability to purchasers is expressly limited to the terms and conditions of sale. Oatey is a trademark of Oatey Co. All other trademarks can be found at www.Oatey.com.
References
- Solvent Cements, Drains, & More for All Your Plumbing Needs | Oatey
- Solvent Cements, Drains, & More for All Your Plumbing Needs | Oatey
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>