GOAL ZERO 44260 Guide 12 Rechargeable Kit User Guide

June 6, 2024
GOAL ZERO

GOAL ZERO logoGuide 12
Rechargeable Kit
User Guide

GET TO KNOW YOUR GEAR

GOAL ZERO 44260 Guide 12 Rechargeable Kit

  1. Battery Indicator Lights
    Scroll when charging
    4 solid blue when full

  2. Flashlight ON/OFF
    Hold for approx 5 seconds

  3. LED Flashlight
    100mW, white LED, 1 Lumen

  4. USB- A Output
    5V, up to 2A (10W max), regulated

  5. USB- C input
    5V, up to 1A (5W max)

GOAL ZERO 44260 Guide 12 Rechargeable Kit- BOX

WHAT’S IN THE BOX

Guide 12
4x AA Batteries (NiMH Rechargeable)
USB-A To USB-C Charge Cable
AAA Tray Insert (AAA Batteries Sold Separately)

HOW IT WORKS

Use the new Guide 12 Plus to charge AA and AAA (NiMH) rechargeable batteries. Recharge from the sun using the Nomad 5 solar panel or any USB port. The rechargeable battery pack can also be used to power your phone, wearables, GPS, or boost your tablet in a pinch. Guide 12 features a 12Wh (4.8V, 2500mAh) battery capacity (AA), USB-C input/USB-A output ports, and a built-in LED flashlight.
Compatible with:

  • USB devices such as phones, GPS, headlamps, POV cameras.
  • Goal Zero Lights: Light-a-Life Mini, Lighthouse Micro Flash, Crush Light, Crush Light Chroma.

The Guide 12 has two charging modes. One for AA (default out of the box) and one for AAA. To switch between them quick press the BATT CHECK/LIGHT button 3 times. If all 4 LEDs blink 5 times the Guide 12 is in AA mode. If LEDs 1 & 2 blink  5 times the Guide 12 is in AAA mode. The charging current for AA batteries is 800mA and the charging current for AAA batteries is 400mA. The max output for both types of batteries is 5V, 2A (10W max) When charging the LEDs will scroll when the battery is fully charged, all four lights stay on.
NOTE: If you are in the wrong charging mode the indicator lights will be inaccurate.
NOTE: When inserting batteries into Guide 12 and pressing the BATT CHECK/LIGHT button only one LED light will display until the unit has been fully charged. To check the battery level after they are fully charged, press the BATT CHECK/LIGHT button and the unit will display approximate charge level by displaying 1,2,3 or 4 LEDs.
The battery indicator is also the button for turning on the flashlight. Hold for approx 5 seconds to turn on/off.
All 4 batteries must be inserted in order to function.
WARNING: Make sure the batteries are inserted correctly. Match + and – of battery to internal markings of the Guide 12.
Charging From Solar:
Charging phones, batteries, and other USB-powered devices from the Nomad 5 is as easy as plugging in.

  1. Use the built-in kickstand to position the panel toward the sun.
  2. Plug your phone or Guide 12 into the USB port located on the backside of the panel and charge up.GOAL ZERO 44260 Guide 12 Rechargeable Kit- Charging From Solar

FREQUENTLY ASKED QUESTIONS

Q: What battery types can be used?
A: Any AA or AAA NiMH rechargeable batteries can be used and recharged. Four same-sized batteries must be inserted for use.
Q: How do I charge?
A: From solar: use Goal Zero Nomad Solar Panels with included USB-A to USB-C cable.
From USB: Use any USB power source like a wall adapter or computer.
Q: Is the Guide 12 waterproof?
A: No, but it is weather-resistant. Care should be taken to shield it from direct sunlight and the elements.
Q: How is it protected?
A: Usage is plug-and-play. The built-in battery management system prevents over-charging and over-discharging of batteries. The USB output will only supply the amount of power needed.
Q: Why is only one LED light displayed?
A: When a battery is replaced in the unit it will only show one LED until the unit is fully recharged. Then when discharging Guide 12 you are able to press the button to see if 1,2,3, or 4 lights are showing to determine how much capacity is left.
Q: Why isn’t the Guide 12 charging my device when I plug it in?
A: Try pressing the BATT CHECK/LIGHT button to initiate a charge. Confirm that the Batteries in Guide 12 are oriented correctly and fully charged.

PRO TIPS

Nickel Metal Hydride (NiMH) batteries often will need to be cycled 3-5 times to reach peak performance and capacity.
To get the most out of your NiMH batteries keep them charging when not in use and cycle them every 3-4 months.
Use certified cables for the device you are charging.
For larger devices like cell phones, we recommend using AA batteries. They have more capacity then AAA batteries.

TECHNICAL SPECIFICATIONS

CHARGE TIMES:

CHARGE TIMES:

Goal Zero Nomad 5| 4-8 hrs
Goal Zero Nomad 10| 4-5  hrs
USB Source| 4 hrs
BATTERY:
Cell chemistry| NiMH
Pack capacity| 12.0Wh (4.8V, 2500mAh)
Single-cell equivalent| 10,000mAh at 1.2V
Lifecycles| 500 cycles
Shelf-life| Keep plugged in, or charge every 3-6 months
Management system| Charging and low-battery
LIGHT:
LED (output)| 100mW, white LED
PORTS:
USB-A port (output)| 5V, up to 2A (10W max),regulated
USB-C port (input)| 5V, up to 1A (5W max)
GENERAL:
Chainable| No
Weight (w/ batteries)| 6.4 oz (181 g)
Dimensions| 2.5 x 4 x 0.75 in (6.4 x 10.2 x 1.9 cm)
Operating usage temp.| 32-104 F (0-40 C)
Certs|
Warranty| 12 months

GOAL ZERO HEADQUARTERS
675 West 14600 South
Bluffdale, UT 84065
1-888-794-6250
Designed in the U.S.A.
Made in China
Nomad is a trademark of Goal Zero.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be  determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

GOALZERO.COM

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals