Oatey 12 Inch Extension Tube Instruction Manual

June 9, 2024
Oatey

logo

Oatey 12 Inch Extension Tube

Oatey 12-Inch-Extension-Tube-product

INSTRUCTION

  1. Measure and cut extension tube (C) to required length.
  2. Position nut (A) then washer (B) on tailpiece (D) (Use reducer washer if tailpiece (D) is 1-1/4 in.)
  3. Slip tailpiece (D) into top of extension tube (C).
  4. Position nut (A) then washer (B) on extension tube (C).
  5. Connect end of extension tube (C) to drain.
  6. Tighten all nuts (A). CHECK FOR LEAKS

©2023 Oatey SCS. All Rights Reserved. This information is based on data believed to be reliable but Oatey makes no warranties, express or implied, as to its accuracy and assumes no liability arising out of its use. The data listed falls within the normal range of product properties but should not be used to establish specification limits or used alone as the basis of design. Oatey’s liability to purchasers is expressly limited to the terms and conditions of sale. Oatey is trademark of Oatey Co. All other trademarks can be found www.Oatey.com.
Oatey.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals