Oatey Dearborn1-1/2 Inch Tubular Slip Joint End Outlet Waste Installation Guide
- June 12, 2024
- Oatey
Table of Contents
INSTRUCTION GUIDE
DISPOSAL END OUTLET WASTE
Dearborn1-1/2 Inch Tubular Slip Joint End Outlet Waste
- Place nut and flanged washer (A) on flanged tailpiece (B). Thread nut onto basket strainer.
- Place nut (C) and washer (D) on flanged tailpiece (B) and thread onto tee (E).
- Insert rubber washer (F) into flanged tailpiece (G) so flange is inside groove of washer (F).
- Place bracket nut (H) and washer (I) onto flange tailpiece (G) and insert tailpiece (G) into tee (E) Tighten nut (H) to tee (E).
- Attach bracket to disposal with bolts.
- Tighten nuts. CHECK FOR LEAKS.
©2023 Oatey SCS. All Rights Reserved. This information is based on data
believed to be reliable but Oatey makes no warranties, express or implied, as
to its accuracy and assumes no liability arising out of its use. The data
listed falls within the normal range of product properties but should not be
used to establish specification limits or used alone as the basis of design.
Oatey’s liability to purchasers is expressly limited to the terms and
conditions of sale. Oatey is trademark of Oatey Co. All other trademarks can
be found www.Oatey.com.
Oatey.com
References
Read User Manual Online (PDF format)
Loading......