somogyi DB 1090DC Wireless Doorbell Instruction Manual

somogyi DB 1090DC Wireless Doorbell

Product Information:

• Product Name: Wireless Doorbell
• Model Number: DB 1090DC
• Battery Type: 3 x 1.5V AA (LR6)
• Additional Battery: CR 2032, 3V
• IP Rating: IP44
• Manufacturer: Somogyi Elektronic Kft.

The product is available in multiple languages including Spanish, Romanian, Slovenian, Croatian, and Bosnian.
The IP44 rating means that the product is protected from solid objects larger than 1mm and splashing water from all directions.

Product Usage Instructions:

1. Insert the 3 x 1.5V AA (LR6) batteries into the doorbell receiver.
2. Insert the additional CR 2032, 3V battery into the doorbell transmitter.
3. Mount the doorbell transmitter outside your door using the provided screws or adhesive tape.
4. Place the doorbell receiver inside your home within range of the transmitter.
5. Test the doorbell by pressing the button on the transmitter to ensure it is working properly.
6. Adjust the volume and chime settings on the receiver according to your preferences.

Note: Make sure to replace the batteries when they run out of power to ensure proper functioning of the doorbell.

• 36 varied style melodies • polyphonic, pleasant sounding • range in open terrain: approx. 100 m • operating frequency: 433,92 MHz • custom encoding with learning function • even up to 8 push-buttons can be used at the same time
• highly disturbance-protected from other bells • push-button power supply: 1 x 3 V (CR2032) button battery, included • bell power supply: 3 x 1,5 V AA (LR6) batteries, not included

INSTALLATION

• The push-button is supplied with the CR 2032 (3 V) button battery.
• Remove the insulation board, if it used.
• Insert 3 x 1,5 AA (LR6) rod batteries to the bell, making sure the polarity is correct!
• If it is successful, the bell emits sound and can be paired with a push-button.
• Pair the two units together.

PAIRING:

After putting the bell under power, it emits sound, then ready to receive the push-button’s signal. Press the push-button once within 120 seconds to create a new operating code. The bell sounds to capture the new code. If you also want to pair additional push-buttons, repeat the process by taking the batteries out, then reinserting them. The bell then sounds again, and is ready to register a new code. Press the other push-button (not accessory) within 120 seconds and the bell learns the other operating code. By repeating this process, up to 8 buttons can be taught to a bell.
After pressing the button once, the melody is played once, and keep pressing the button does not cause the melody to be repeated. Use the M button on the backside of the bell to select the desired melody. Then this melody will sound at every ringing. After removing the button battery, the melody changes to the factory default, but the push-buttons does not needed to be paired again. By pressing the L button on the back of the bell, the bell enters learning mode, now you can pair it with the bell push by pressing its button. By pressing and holding the L button inside the bell push immediately after pressing the L button on the back of the bell, you can delete the pairing.

BATTERY REPLACEMENT

To replace the battery, remove the battery compartment lid on the backside of the bell, replace the old batteries to new ones taking care of polarity, then replace the battery compartment lid.
Attention! When the battery is replaced, the bell emits sound, and returns to learning mode. If you do not want to add more push-buttons, then press one of the buttons you have already taught to it, to close learning mode.

CLEANING

For the optimal operation of the appliance, it may be necessary to clean the appliance at a frequency depending on the degree of contamination, but at least once a month. Use a soft, dry cloth. Do not use aggressive cleaning agents or liquids!
WARNINGS

• Random ringing of the bell may be caused by other bells or electrical equipment operating nearby. In this case, the codes must be deleted by removing the batteries for 10 seconds, and the units must be paired again.
• After battery replacement, pairing and selecting melody must be repeated!! If you have a pairing problem, remove the batteries for a short time! Remove the batteries even if you don’t use the appliance for a long time!
• Electrostatic discharge may cause the loss of memory. In this case, re-pair the units.
• Replace the batteries in case of decreasing range. The capacity of batteries decrease in cold conditions. Do not use different kinds of batteries and/or used and new batteries together! Do not use rechargeable batteries!
• The range is reduced by walls, metal objects and radio-frequency equipment nearby. Do not place the push-button on metal or UPVC door frame! • Use a soft, dry cloth for cleaning.
• The bell is designed for indoor use. Protect it from dust, humidity, liquids, heat, dampness, frost, shock and direct thermal radiation or sunshine! Do not place it in a kitchen, bathroom. The outdoor unit must be installed on a place protected against direct rain and sunshine.
• Somogyi Elektronic Ltd. certifies, that this radio-equipment conforms to 2014/53/EU directive. Full text of EU Certification of Conformity is available at the following address: somogyi@somogyi.hu

WARNING! RISK OF EXPLOSION IN CASE OF INCORRECT BATTERY REPLACEMENT! IT CAN BE DONE ONLY BY SAME OR REPLACING TYPE! DO NOT EXPOSE BATTERIES TO DIRECT THERMAL RADIATION AND SUNSHINE! DO NOT BURN THE BATTERIES! IF THERE IS SOME LIQUID FLOWN OUT FROM THE BATTERY, TAKE A PROTECTIVE GLOVE, AND CLEAN THE BATTERY HOLDER WITH A DRY CLOTH! KEEP BATTERIES OUT OF REACH OF CHILDREN! IT IS FORBIDDEN TO OPEN, BURN AND SHORT-CIRCUIT AND CHARGE BATTERIES! RISK OF EXPLOSION!!
THIS PRODUCT INCLUDES BUTTON CELL. DO NOT SWALLOW THE BATTERY, RISK OF CHEMICAL BURN! IN CASE OF INGESTION, IT CAN CAUSE STRONG INTERNAL BURN WITHIN 2 HOURS AND MAY LEAD TO DEATH! KEEP THE NEW AND USED BATTERIES OUT OF REACH OF CHILDREN! IF THE COVER OF BATTERY COMPARTMENT CANNOT CLOSE PROPERLY, DO NOT USE THE PRODUCT MORE, AND KEEP OUT OF CHILDREN! IF YOU THINK A BATTERY HAS BEEN SWALLOWED OR GOT INTO ONE OF THE BODY PARTS, IMMEDIATELY CONSULT A DOCTOR!
Waste equipment must be collected and disposed separately from household waste because it may contain components hazardous to the environment or health. Used or waste equipment may be dropped off free of charge at the point of sale, or at any distributor which sells equipment of identical nature and function. Dispose of the product at a facility specializing in the collection of electronic waste. By doing so, you will protect the environment as well as the health of others and yourself. If you have any questions, contact the local waste management organization. We shall undertake the tasks pertinent to the manufacturer as prescribed in the relevant regulations and shall bear any associated costs arising.
DISPOSING OF ALKALINE AND RECHARGEABLE BATTERIES • Batteries, whether alkaline or rechargeable, must not be handled together with regular household waste. It is the legal obligation of the product’s user to dispose of batteries at a nearby collection center or at a retail shop. This ensures that the batteries are ultimately neutralized in an environment-friendly way.

References

• Digitalis d.o.o.
• Elementa d.o.o.
• Somogyi Elektronic Kft.
• Somogyi Elektronic S.R.L.
• Somogyi Elektronic Slovensko s.r.o..
• Zed d.o.o.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>