SentrySafe P44718 Water/Fire Resistant Alarm Safe Owner’s Manual

June 5, 2024
SentrySafe

SentrySafe logo Alarm Safe Owner’s Manual
SentrySafe P44718 Water Fire Resistant Alarm Safe : SentrySafe.com
: 1-800-828-1438

Water/Fire Resistant Alarm Safe
Thank you for choosing SentrySafe to store all your important documents and valuables.
We hope that this product will help you stay organized and provide you with the peace-of-mind of knowing the things most important to you are protected.

Your SentrySafe Product

Your SentrySafe product has a number of features to keep your important documents and valuables protected including:SentrySafe P44718 Water Fire
Resistant Alarm Safe - Product

SentrySafe P44718 Water Fire Resistant Alarm Safe -
icon Loud Audible Alarm

THE LOUD AUDIBLE ALARM ALERTS YOU WHEN:

The safe is picked up or movedSentrySafe P44718 Water Fire Resistant Alarm
Safe - fig 1

There is an attempt to pry the door open

The wrong combination  is entered 5 timesSentrySafe P44718 Water Fire
Resistant Alarm Safe - fig 3

The safe is jolted, hit or jarred

Using Your SentrySafe Alarm Safe

Preparing Your Safe for First Time Use

  1. Remove the lock-out screw indicated by the yellow tag on the inside of the door of the safe.
  2. Remove the battery compartment from the inside door and insert 4 AAA alkaline batteries. DO NOT use rechargeable batteries or any other type of non alkaline battery. Do not mix old and new batteries. Do not mix alkaline and standard batteries.
  3. Replace the battery compartment.

Using Your Safe

  1. Touch the keypad to wake up the safe.
  2. Enter the 5 digit factory code found on the back of this owner’s manual.
  3. Turn the handle to open the safe.

IMPORTANT: Test your code several times before putting valuables inside.
IMPORTANT: A dual key lock option may be included in your safe. Using this key can disable/enable entry into the safe.
IMPORTANT: If you exert too much force on the handle, the handle will move without moving the bolts. When this happens, you will hear a ’click.’ DO NOT be alarmed. This feature is designed to protect the bolts from being overpowered by force. Simply exert force in the opposite direction (lifting up) until the handle clicks back into place.

SentrySafe P44718 Water Fire Resistant Alarm Safe -
icon Setting the Alarm

IMPORTANT: Like a home alarm system, the alarm must be set each time you lock your safe to activate the audible alert. In the event your alarm is not activated and 5 wrong code attempts are entered, the safe will go into delay mode for 2 minutes. No alarm will go off when moved, jarred or with attempted forced entry.

  1. Close and lock the door of your safe.
  2. Touch the keypad to wake up the safe.
  3. Press: “0” – “PROG” – “9”
    The alarm indicator will blink every 10 seconds to indicate the alarm has been activated.

Programmable Codes

Your SentrySafe comes with 3 types of codes for accessing your safe. For more information on programming, these codes see the “Programming Safe Features” section of this
owner’s manual.
FACTORY CODE (FC): The safe will ALWAYS unlock using this 5-digit code (found on the back of this owner’s manual). This code cannot be deleted or changed.
USER CODE (UC): A 5-digit programmable code of your choosing that can be changed or deleted.
SECONDARY CODE (SC): A 5-digit programmable code of your choosing that can be changed or deleted. Can only be programmed after a user code has been activated.

SentrySafe P44718 Water Fire Resistant Alarm Safe -
icon Audible Alarm Features

Turning off the Alarm
If the loud audible alarm on your safe has been triggered:

  1. Touch the keypad to wake up the safe.
  2. Enter a valid code.

NOTE: You will need to enter your code again to open the safe.
NOTE: The Factory Code (FC) or User Code (UC) must be entered to program safe settings. A secondary code cannot be used.

Changing Alarm Sensitivity
You can change the level of sensitivity on your safety alarm from a scale of zero “0” to “5”. with Zero “0” being the least sensitive only responding to incorrect codes and “5” being the most sensitive to slight movement of the safe.

  1. Touch the keypad to wake up the safe.
  2. Press: “0” – “PROG” – “PROG” – “(FC)” OR “(UC)” – “3”
  3. Then press “0”, “1”, “2”, “3”, “4” OR “5” to program your desired sensitivity. 3

Changing Length of Alarm
You may also change the length of which your alarm will sound once triggered from 01 to 99 minutes.

  1. Touch the keypad to wake up the safe.
  2. Press: “0” – “PROG” – “PROG” – “(FC)” OR “(UC)” – “4”
  3. Then press any number between 01 and 99 to indicate the number of minutes you would like your alarm to sound once triggered.

Programming Safe Features

YOUR DIGITAL LOCK

Programming the User Code (UC)
Only 1 user code can be programmed at a time.

  1. Touch the keypad to wake up the safe.
  2. Press: “PROG” – “FACTORY CODE (FC)” (found on the back of this owner’s manual).
  3. The Program indicator light will blink.
  4. Press the five-digit user code you have chosen for your safety.

Deleting a User Code

  1. Touch the keypad to wake up the safe.
  2. Press: “PROG” – “FACTORY CODE (FC)” (found on the back of this owner’s manual).
  3. The Program indicator light will blink.
  4. Press: “0” –“0” –“0” –“0” –“0”
    NOTE: The electronic lock will NOT indicate that it has deleted the user code—please test the code to make sure it has been deleted.

Programming the Secondary Code (SC)
Only 1 user code can be programmed at a time.

  1. Touch the keypad to wake up the safe.
  2. Press: “PROG” – “PROG” – “PROGRAMMED USER CODE (UC)”
  3. The Program indicator light will blink.
  4. Press the five-digit secondary code you have chosen for this safe.

Deleting a Secondary Code

  1. Touch the keypad to wake up the safe.
  2. Press: “PROG” – “PROG” – “PROGRAMMED USER CODE (UC)”
  3. The Program indicator light will blink.
  4. Press: “0” –“0” –“0” –“0” –“0”

NOTE: The electronic lock will NOT indicate that it has deleted the user code—please test code to make sure it has been deleted.

Programming Safe Features

BATTERY AUXILIARY OVERRIDE

If battery power in the safe is running low and cannot operate the safe, you will need to use the Battery Auxiliary Override feature to open the safe.

IMPORTANT: This should not be used as a primary means to gain entry into the safe.

  1. Open the silicone cap found on the side of the lock.
  2. Insert a 9-volt battery into this slot.
  3. Touch the keypad to wake up the safe.
  4. Enter your five-digit code.
  5. Turn the handle to open the safe.
  6. DO NOT use rechargeable batteries or any other type of non-alkaline battery.

Programming Safe Features

OTHER PROGRAMMABLE SAFE FEATURES

Length of Interior Light
NOTE: The Factory Code (FC) or User Code (UC) must be entered to program safe settings. A secondary code cannot be used.

  1. Touch the keypad to wake up the safe.
  2. Press: “0” – “PROG” – “PROG” – “(FC)” OR “(UC)” – “2”
  3. Press: “0” to program to turn off
    “1” to program for 30 seconds
    “2” to program for 60 seconds

Digital Keypad Sound On/Off

  1. Touch the keypad to wake up the safe.
  2. Press: “0” – “PROG” – “PROG” – “(FC)” OR “(UC)” –“1”
  3. Press: “1” to turn on the digital keypad sound or
  4. Press: “0” to turn off the digital keypad sound

Cleaning Your Keypad

Use a soft cloth or microfiber cloth to wipe the surface of your lock to remove fingerprints.

Safe Warnings and Important Information

• This product is not intended for the secure storage of all materials. Items such as firearms, other weapons, combustible materials and medication should not be stored in this unit.

  • DO NOT store delicate items directly in your safe.
    – In order to protect your valuables from potential threats of flood, your safe is equipped with an airtight gasket. Because of this gasket, moisture in the air could potentially be locked inside your safe and accumulate inside your safe.
    – The desiccant bag included in your safe during shipment should be left inside your safe. DO NOT DISCARD IT. It is intended to help absorb moisture. Replace or recharge your desiccant bag every 6 months for optimum performance.
    – If you choose to store delicate items such as jewelry with working parts, watches, stamps or photos in your safe, we recommend putting them in an air- tight container prior to placing in the safe for storage.
    – NOTE: SentrySafe will not be responsible for any damage or loss of items placed in the unit due to moisture.

  • DO NOT store pearls in this safe unit. In the event of a fire, the interior of your safe may reach up to 350˚F. While this temperature is safe for your paper documents, digital media, and other valuables, pearls can be damaged at much lower temperatures.

  • DO NOT store any film-based technology or media in this safe.
    – This product is not intended to protect computer floppy disks or diskettes, film cartridges, tapes, audio/video cassettes or photo negatives.

  • Your safe is only part of your total security protection.
    – SentrySafe recommends that you store your safe in closets, offices, basements, bedrooms and any other locations that are convenient for you but out of the direct line of sight from prying eyes. The location of the safe does not affect the safe’s ability to protect your valuables inside.

SentrySafe P44718 Water Fire Resistant Alarm Safe - icon
1 Limited Lifetime After-Fire Replacement Program

If your SentrySafe product is in a fire, it will be sealed shut making it necessary for it to be pried open. To help your family begin again, SentrySafe will ship a replacement free of charge. To be eligible for the Limited Lifetime After Fire Replacement Program, you (the original owner) must register your product using the included registration form or by visiting www.registermysafe.com.
For more information about the Limited Lifetime After-Fire Replacement Program, visit SentrySafe.com

Troubleshooting

THE PROBLEM: WHY IT IS HAPPENING: THE SOLUTION:
The door will not lock. 1. Shipping screw is in place.
2. Confirm that there is no obstruction in the door. 1. Remove the screw on

the back inside of the door.
2. Remove all items and accessories from inside the safe.
If this resolves the issue, re-set the accessories and organize items to properly fit.
The handle is not in the horizontal position when the safe is locked.| The clutch mechanism has been engaged.| Rotate the handle up or down until it clicks into the horizontal position.
Cannot open the door after inputting the electronic code.| 1. Safe doors equipped with a water-resistant gasket may initially be tight.
2. Keylock is in the locked position (select models only).
3. Battery power is low.| 1. Hold the handle up while inputting the code and then pull it down on the handle.
2. If your safe is equipped with a key lock ensure that the key is in the unlocked position (select models only).
3. Use an auxiliary battery connection to gain access to your safe and replace the main batteries.
The red indicator light blinks three times and there are three beeps.| An incorrect code has been entered.| Verify code and re-enter. If the programmable code you are using doesn’t work then use the factory code. If successful re-program your programmable code.
The red indicator light blinks five times and there are five beeps.| Keypad communication error.| Please call our Customer Service center.
The red indicator light blinks once and there is one beep.| The program button is pressed out of sequence.| Start over.
Yellow “low battery” light is blinking.| Battery power is low.| Replace batteries.
Cannot open the door after inputting the code and the yellow “low battery” light is on.| Battery power is low. The lock may not function properly.| Use an auxiliary battery connection to gain access to your safe and replace the main batteries.
The alarm is triggered.| Safe has been moved, jarred or an incorrect code has been entered 5 times.| Wake up the safe and enter a programmed code or factory code.
The red alarm and red error light are blinking.| The alarm was triggered.| Wake up the safe and enter a programmed code or factory code.
The alarm frequently goes off.| The alarm was programmed too sensitive.| Change sensitivity by following directions under -Audible Alarm Features” in this owner’s manual.

Thank you for choosing SentrySafe!

Customer Care

Our US-based customer care team is happy to help.
: SentrySafe.com
: 1-800-828-1438

Got a question? We’re happy to help!
If you ever have any questions regarding your SentrySafe product, please give us a call at 1-800-828-1438 or visit our website at SentrySafe.com. Many concerns can be resolved quickly over the phone.

Never forget your combination again!
Registering your SentrySafe allows you to securely store your combination online, access your owner’s manual, and more. So you can always have reliable access to the things  that matter most to you. Visit SentrySafe.com to learn more.

Organize Your Safe to Fit Your Needs
Need help getting organized? SentrySafe has a variety of organizational features available to help you personalize your safe to fit the needs of your home and business. Visit  SentrySafe.com or call our customer care team at 1-800-828-1438 for more information.

Model No.
Dial Combination (Not All Models)
Key No. (Not All Models)
Factory Code (Not All Models)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals