FS FFOI-603 400X Fiber Optic Indspection Probe Microscope User Guide

FFOI-603
400X FIBER OPTIC INSPECTION
PROBE MICROSCOPE
Quick Start Guide V1.1

Introduction

FFOI-603 Probe Microscope offers the digital function to connect the laptop directly without an additional power supply. With a specific driver and software, the end face images can be video/captured/stored in real-time. USB 2.0 supports XP, Win7, Vista systems.

Accessories

|
---|---

FFOI-603 fiber optic inspection can be matched with different types of adapter tips. When using the adapter tip, make sure the connection between barrel assembly and adapter tip is frm enough. The table below shows each type of FFOI-603 adapter tip.

Type

|

Adapter Tip

---|---
2.5PC-M| Detecting optical male end face of SC FC ST and
2.5mm diameter connectors
1.25PC-M| Detecting optical male PC end face LC MU and
1.25mm diameter connectors
SC-PC-F| Detecting optical PC female end face of SC
FC-PC-F| Detecting optical PC female end face of FC
LC-PC-F| Detecting optical PC female end face of LC
SC-PC-F120| Detecting optical PC female end face of PC/APC
of SC/FC LSH/LC 120 angle
MU-PC-F| Detecting optical female PC end face of MU
MT-PC-F| Detecting optical female PC end face of MT
ST-PC-F| Detecting optical female PC end face of ST
LSH-APC-F| Detecting optical female PC adapter of LSH
MPO-PC\APC-F| Detecting MPO cables connectors of PC/APC
FC-APC-F| Detecting optical female PC end face of FC
2.5APC-M| Detecting optical male APC end face LC MU and
2.5mm diameter connectors
1.25APC-M| Detecting optical male APC end face LC MU and
1.25mm diameter connectors
SC-APC-F| Detecting APC end face of SC
LC-APC-F| Detecting APC end face of LC

Function Introductions

Installing

1. Hold the handle and insert the adapter tip into the lens cavity along the axial direction of the lens bar, use nut fasten it.

NOTE: Never crush the lens bar during the installation. Please ensure the letter on the adapter tip right above.

2. Insert FC Cables.

Operation Instructions

Step 1. Connect FFOI-603 fiber optic inspection to the PC display and install the adapter tip that needs to be tested.
Step 2. Once the blue light turns on, it means the FFOI-603 fiber optic inspection regularly works.
Step 3. Put the driver disk into the computer and choose the drive folder. Double-click “players. exe”. If you want to collect images or dynamic documents, click “File” and “Open Device (Ctrl+V)”.

Step 4. Choose “FiberMicro-scope” as a video option. No need to change the audio option.
Step 5. Click “OK”, end the installation. You can observe the status of the inspection.

Maintenance

(1) Keep using one type of adapter to avoid excess loss from different adapters.
(2) Choose the correct fiber connector before testing.
(3) Take out the batteries when not in use.

Online Resources

Download https://www.fs.com/download.html
Help Center https://www.fs.com/service/help_center.html
Contact Us https://www.fs.com/contact_us.html

Product Warranty

FS ensures our customers that any damage or faulty items are due to our workmanship, we will offer a free return within 30 Days from the day you receive your goods.

Warranty: All Fiber Optic Inspections enjoy 1-year limited warranty against defects in materials or workmanship. For more details about the warranty, please check at
https://www.fs.com/policies/warranty.html

Return: If you want to return item(s), information on how to return can be found at https://www.fs.com/policies/day_return_policy.html

Q.C. PASSED
Copyright © 2021 FS.COM All Rights Reserved.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>