ActronAir PKV720T Weather Hood Kit User Manual
- June 1, 2024
- ActronAir
Table of Contents
ActronAir PKV720T Weather Hood Kit
Specifications
- Models: PKV720T, PKY820T, PKY960T, PKV850T, PKV960T
Weights (kg):
- PKV720T: Shipping Nett 37
- PKY820T: Shipping Nett 21
- PKY960T: Shipping Nett 54
- PKV850T: Shipping Nett 24
- PKV960T: Shipping Nett 62
Optional Weather Hood Assembly Procedures:
Weather Hood Sub-Assembly:
- Pre-assemble weather hood centre panels as shown in Step-1 of Fig. 1 below.
- Assemble weather hood centre, right side panel, and left side panel as shown in Step-2 of Fig. 1 below.
IMPORTANT NOTE: For proper sealing, PVC closed
cell tape must be applied to adjoining contact edges before
fastening the screws.
Weather Hood Installation
- Apply PVC closed cell tape on contact edges of the Weather Hood Assembly as shown in Step-1 below.
- Mount weather hood assembly onto the unit, using the screws provided.
FAQ:
Q: Can anyone install the weather hood kit?
A: Only qualified technicians are allowed to perform the installation and
commissioning procedures described in the guide. Compliance with WH&S
regulations is mandatory during the process.
INSTALLATION AND COMMISSIONING GUIDE
WEATHER HOOD KIT – WHOA8296 / WHOA72 / WHOA8596
MODELS :
PKV720T PKY820T PKY960T PKV850T PKV960T
SAFETY INSTRUCTIONS
Only qualified technicians are allowed to perform the procedures described in
this guide.
WH&S regulations must be observed and will take precedent during the
installation and commissioning process.
| Optional Weather Hood Part Number | Model | Weights (kg) |
|---|---|---|
| Shipping | Nett | |
| WHOA8296 | PKY820/960T | 37 |
| WHOA72 | PKV720T | 54 |
| WHOA8596 | PKV850/960T | 62 |
OPTIONAL WEATHER HOOD MATERIALS (WHOA 8296):
- 1 Pc – Weather Hood Centre Top Panel
- 1 Pc – Weather Hood Centre Panel
- 1 Pc – Weather Hood Right Side Panel
- 1 Pc – Weather Hood Left Side Panel
- 1 Roll – PVC Closed Cell Tape
- 40 Pcs – Stainless Steel Screw 12G x 5/8, #2 Phillips Pan Head
IMPORTANT NOTE
Economy option is available only with Economy Damper on LHS or RHS
configuration.
OPTIONAL WEATHER HOOD ASSEMBLY PROCEDURES:
Weather Hood Sub-Assembly:
- Pre-assemble weather hood centre panels as shown in Step-1 of Fig. 1 below.
- Assemble weather hood centre, right side panel and left side panel as shown in Step-2 of Fig. 1 below.
IMPORTANT NOTE:
For proper sealing, PVC closed cell tape must be applied to adjoining contact
edges before fastening the screws.
WEATHER HOOD INSTALLATION
- Apply PVC closed cell tape on contact edges of the Weather Hood Assembly as shown in Step-1 below.
- Mount weather hood assembly onto the unit, using the screws provided, as shown below.
Table 1| Suggested Air FilterProvisions| Return/Spill Air Access| Outside
AirDuct Spigot
---|---|---|---
MODEL| QTY| Sizes(H x W x T) – mm| Dimensions(H x W) – mm| Dimensions(H x W) –
mm
PKY820TPKY960T| 9| 594 x 492 x 96| 1400 x 400| 1258 x 668
PKV720T| 6| 508 x 508 x 102| 1494 x 374| 1498 x 378
PKV850T| 610 x 610 x 102| 1598 x 516| 1602 x 520
PKV960T
OPTIONAL DAMPER WEIGHT & DIMENSIONS
| Unit Model | Part Number | Application | * Weight (kg) | Dimensions (mm) |
|---|---|---|---|---|
| PKY820T – PKY960T | 3520-012 | Outside Air | 13.3 | 600 x 1200 x 165 |
| PKV720T | 3520-032 | 17.1 | 450 x 1665 x 100 | |
| PKV850T – PKV960T | 3520-031 | 21.69 | 530 x 1642 x 100 |
- Weight includes damper and actuator weights
ActronAir is constantly seeking ways to improve the design of it’s products, therefore specifications are subject to change without notice. Copyright © 2015 Actron Engineering Pty. Ltd. All rights reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>