DINAN D100-0936 Performance Spring Set Instructions
- June 9, 2024
- DINAN
Table of Contents
DINAN D100-0936 Performance Spring Set Instructions
INSTALLATION NOTES
PLEASE READ BEFORE BEGINNING INSTALLATION
The front & rear springs look very similar to each other. Please refer to the part number printed on each spring to determine the correct installation location:
- D100-0860 = Front Spring
- D100-0862 = Rear Spring
For best results, we recommend installation of the companion handling kit, p/n D193- 0121.
Alignment:
- An alignment is required after installation.
- All Dinan suspension alignments are done with full fuel tanks and no weight inside the vehicle.
- Specifications are as follows:
FRONT| Setting| Tolerance
---|---|---
Camber| -1.8°| ± 0.42°
Caster| 8.0°| ± 0.5°
Total Toe| 0.17°| ± 0.03°
REAR| |
Camber| -1.5°| ± 0.08°
Total Toe| 0.23°| ± 0.03°
If you encounter any difficulties during the installation, or if these instructions are not clear to you, please call Dinan’s Technical Support Staff @ 800-341-5480.
Happy Motoring!
Read User Manual Online (PDF format)
Loading......