Latitude Run 5197-F Executive Office Chair Instruction Manual
- May 15, 2024
- Latitude Run
Table of Contents
Latitude Run 5197-F Executive Office Chair
Accessories List
-
Backrest
-
Seat Cushion
-
2 Armrests
-
Base Plate
-
Split Base Tube
-
Central Base Tube
-
Central Base Buckle
-
Air Rod
-
5 Castors
-
Hexagon Wrench
-
8 Decoration Caps
-
5 Screws (M6×20)
-
8 Screws (M8×25)
-
4 Screws (M6×30)
Notice [If any question, contactBestEra-service@outlook.com/BestEra-Spt@outlook.com]
- Do not stand in this chair or use the chair as a step ladder, use it as chair only. This chair is designed for one person to use at a time.
- Do not use this chair unless all bolts, screws and knobs are firmly secured.
- Check all bolts, screws and knobs every 6 months. Tighten if any are loose.
- Failure to follow these instructions may result in serious injury or death of yourself and people around you.
- Some of the parts are heavy and/or have sharp edge, please install it carefully to avoid hurting you and people around you.
Instruction for Use
Upward/Downward adjustment
Armrest adjustment
115° Rocking function
**300LB (136kg)
**
Thanks for purchasing our products. Please read this manual before assembly. And please assemble in order. After the assembly, keep the instruction properly. Make sure all the parts are included (14 kinds in total).
Assembly Instruction
Step 1
Take out Split Base Tube (5), Central Base Tube (6). Insert Split Base Tube
(5) into Central Base Tube (6) as shown. You can see there are screw holes.
Align with the holes, tighten Screws M6X20 (12) with Hexagon Wrench (10) to
fix 5 Split Base Tube (5) to Central Base Tube (6). Repeat it five times.
Step 2
Take out Castors (9). Insert Castors (9) into part of Step 1 as shown. There
are 5 Castors (9) need to be inserted. Take out Air Rod (8). Put Air Rod (8)
through Central Base Buckle (7) into the hole of Central Base Tube (6) as
shown.
- Caution: Confirm 5 Castors (9) must be inserted deeply. Otherwise the castors could easily fall out and the chair could fall down.
Step 3
Fix Base Plate (4) to the bottom of Seat Cushion (2). Tighten the Screws
M6X30(14) with Hexagon Wrench (10) firmly. Then insert the Air Rod (8) into
the Base Plate (4), the Base Plate (4) has holes in the middle. Press the Seat
Cushion (2) from top to bottom, with all the strength of your body.
Step 4
Tighten the Screw M8X25 (13) with a Hexagon Wrench (10) to fix the 2 Armrests
(3) on the Seat Cushion (2). Then fix the Backrest (1) between the 2 Armrests
(3) and the Seat Cushion (2) with Screw M8X25 (13). Tighten the 8 screws
firmly and then screws with 8 Decoration Caps (11). The assembly is complete
now. * Caution: Do not tighten the bolts before the product is fully
assembled.
- Caution: Tighten the 8 Screws firmly and then cover the Screws with Decoration Caps (11). The assembly is complete now.
Activate Your Warranty Now!
We guarantee you a pleasant buying experience. Please scan the QR code to
activate your warranty so that you can enjoy priority better after-sales
service.
Customer Support
Scan the QR code to watch the instruction video.
Documents / Resources
|
Latitude Run 5197-F Executive Office
Chair
[pdf] Instruction Manual
5197-F Executive Office Chair, 5197-F, Executive Office Chair, Office Chair,
Chair
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>