Somogyi TWF 821 Tower Fan Instruction Manual

Somogyi TWF 821 Tower Fan

Product Information

The TWF 821 is a tower fan that consists of the following parts:

• Rotary knob
• Air outlet
• Fan base
• Recessed carrying handle

The fan has a sleek tower design and is suitable for use in various environments.

Product Usage Instructions

1. Place the fan on a flat and stable surface.
2. Plug in the fan to a power source.
3. Use the rotary knob to adjust the fan speed as desired.
4. The air outlet is where the cool air is released. Position the fan in a way that the air flow is directed towards you.
5. The recessed carrying handle can be used to move the fan around if needed.
6. Before use, please read the safety instructions in the user manual carefully and keep it for future reference.
7. The tower fan can be used by children aged 8 years or above and persons with reduced mobility, under adult supervision.

Overview

STRUCTURE (Figure 1.)

1. rotary knob
2. air outlet
3. fan base
4. recessed carrying handle

Safety and maintenance

TOWER FAN

IMPORTANT SAFETY INSTRUCTIONS
READ THE INSTRUCTION MANUAL CAREFULLY BEFORE USE AND RETAIN IT FOR LATER REFERENCE!
WARNINGS

1. Before use of the product, please read this instructions manual and keep it for future reference. The original document was prepared in Hungarian language.
2. This appliance can be used by children aged 8 years or above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, provided that they are supervised or have been given instructions concerning the safe use of the appliance and understand the hazards involved. Children may not play with the appliance. Children may perform the cleaning or user maintenance of the appliance subject to supervision.
3. Make sure that the device was not damaged during shipping.
4. Do not use the appliance in environments where flammable vapours or explosive dust may be released. Do not use in an inflammable or explosive atmosphere.
5. Operate the appliance under constant supervision at all times.
6. Do not operate the appliance near children without supervision.
7. Use it only under dry, indoor conditions. Protect it from humid environments (e.g., bathroom, swimming pool).
8. DO NOT use the appliance near a bathtub, washbasin, shower, swimming pool or sauna.
9. Do not use the appliance in motor vehicles or confined spaces (<5m2) (e.g., elevators).
10. If you are not going to use the appliance for an extended period, turn it off and unplug the power cord.
11. Always unplug the appliance before moving it.
12. Always move it by grabbing the recessed carrying handle.
13. If you notice any irregularities (such as unusual noise from the appliance or burning smell), switch off and unplug the appliance immediately.
14. Make sure that no objects or liquids can enter the appliance through the openings.
15. Protect from dust, moisture, sunlight and direct heat.
16. Before cleaning, disconnect the appliance from the power supply by pulling out the plug.
17. Never touch the appliance or the power cord with wet hands.
18. Only connect the device to sockets with a 230V~ / 50Hz rated supply voltage.
19. Always fully unroll the supply cable.
20. Do not run the power cord across the device.
21. Do not run the power cord under carpets, mats, etc.
22. Keep the device in a place, where the power supply plug can be easily reached and unplugged.
23. Run the power supply cable so that it cannot be accidentally disconnected, and it does not create a risk of stumbling.
24. Due to continuous development, the technical specifications and design of this product may change without prior notice.
25. The most recent instruction manual is available for download at the website www.somogyi.hu.
26. However we regret such inconvenience, we do not take any responsibility for possible printing errors.
27. The product is designed for household, not for industrial use.

Caution: Risk of electric shock! Do not attempt to disassemble of modify the unit or its accessories. In case any part is damaged, immediately power off the unit and seek the assistance of a specialist.
In the event that the power cable should become damaged, it should only be replaced by the manufacturer, its service facility or similarly qualified personnel.

ASSEMBLING

ASSEMBLING AND SETTING UP THE DEVICE

1. Carefully remove the packing material and avoid damaging the plastic cover with scissors or a knife.
2. Prepare the two-part base for assembly.
3. Follow the steps sown in Figure 2:
4. First, remove the large nut from the bottom of the fan.
5. Lead the cord between the two parts of the base.
6. Turn and push together the two parts of the base.
7. Fit the assembled base to the bottom of the fan, so that the small positioning pin should enter the hole in the base.
8. Secure the base with the large nut in the middle.
9. Route the power cord in the cable groove on the bottom of the base, while taking care not to break it or damage the insulation.
10. Before setting the appliance upright on its base, make sure that the cord moves freely, and it is undamaged.
11. Place the appliance on a solid, level surface, keeping it away from direct heat and open flame.
12. You can then connect it to the mains.

CLEANING

To ensure the optimal operation of the device, you need to clean it on a monthly basis at least, or when it becomes dirty.

1. Before cleaning, turn off the appliance and disconnect it from the power supply by pulling out the plug.
2. Clean the outside of the appliance with a slightly damp cloth. Do not use aggressive cleaning agents! Do not let water leak inside the appliance or spill on electrical components.
3. Restart the fan.

TROUBLESHOOTING

DISPOSAL

Waste equipment must be collected and disposed separately from household waste because it may contain components hazardous to the environment or health. Used or waste equipment may be dropped off free of charge at the point of sale, or at any distributor which sells equipment of identical nature and function. Dispose of product at a facility specializing in the collection of electronic waste. By doing so, you will protect the environment as well as the health of others and yourself. If you have any questions, contact the local waste management organization. We shall undertake the tasks pertinent to the manufacturer as prescribed in the relevant regulations and shall bear any associated costs arising.

FEATURES

• space-saving tower fan
• easy to assemble without the need for tools
• selection of power level and oscillation mode with a rotary knob
• 3 speeds
• oscillation 85°
• recessed carrying handle

OPERATION OF THE FAN
You can use the rotary knob to select from the following operating modes:

TECHNICAL SPECIFICATIONS

• power supply …………………………………………………….. 230V ~ / 50Hz / 40W
• contact protection rating ……………………………………… class II
• maximum fan air mass flow …………………………………. F = 25,29 m3/min
• fan input power ………………………………………………….. P = 37,78 W
• operating value ………………………………………………….. SV = 0,14 (m3/min)/W
• standby power consumption ………………………………… PSB = 0 W
• fan sound power level …………………………………………. LWA = 53,2 dB(A)
• maximum airspeed …………………………………………….. c = 3,49 m/sec
• measurement standard for operating value ……………. EN ISO 5801:2017
• overall dimensions: …………………………………………….. 20.5 x 22 x 82cm
• weight: ……………………………………………………………… 2kg

Distribuitor: S.C. SOMOGYI ELEKTRONIC S.R.L.
J12/2014/13.06.2006 C.U.I.: RO 18761195
Cluj-Napoca, judeţul Cluj, România, Str. Prof. Dr. Gheorghe Marinescu, nr. 2, Cod poştal: 400337
Tel.: +40 264 406 488,
Fax: +40 264 406 489
www.somogyi.ro

References

• Digitalis d.o.o.
• Elementa d.o.o.
• Somogyi Elektronic Kft.
• Somogyi Elektronic S.R.L.
• Somogyi Elektronic Slovensko s.r.o..
• Zed d.o.o.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>