TotalPond 52325 Waterfall Pumps Instruction Manual

TotalPond 52325 Waterfall Pumps

TotalPond 1200-2000 GPH Waterfall Pumps

product information

The TotalPond Waterfall Pumps (#52325 and #52321) are designed to create a waterfall in your pond or water garden. The pumps are suitable for use in ponds, water gardens, and other outdoor water features. The pumps come with a pump shield to protect the pump from debris and prevent clogging. The pumps have a maximum flow rate of 1200 GPH and 2250 GPH respectively, and a maximum pumping height of 16 ft. and 17 ft. respectively. The pumps are energy- efficient and
have a power consumption of 75 watts/0.85 amps and 105 watts/1.3 amps respectively. The pumps come with a 16 ft. power cord.

Product Usage Instructions

1. Before beginning assembly or operation of the product, ensure that all parts are present. Compare parts with the package contents list and diagram. If any part is missing or damaged, do not attempt to assemble, install, or operate the product. Contact Customer Care for replacement parts.
2. For maximum water flow, use the largest tubing size. Trim the tubing adapter using a hacksaw at the location indicated. If you do not want to use the largest tubing size, skip to Step 2.
3. For item #52325, connect the tubing to the outlet of the pump. For item #52321, connect the adapter to the pump and connect the tubing to the outlet of the adapter. Note that tubing is not included.
4. Place the pump inside the pump shield. Pull the drawstring until the pump shield is fully closed around the tubing and power cord. Tie a knot in the drawstring.
5. Place the pump into the water and connect it to a properly grounded electrical outlet.

Warning: Do not use the product in swimming pools or marine areas.

Caution: Always disconnect units from the power source before beginning any maintenance or work on the unit.

Note: Visit WWW.TOTALPOND.COM for more information and tips on using the product. To register your product, use your smartphone camera to scan the QR code or visit our website totalpond.com/register. For questions, problems, or missing parts, contact Customer Care at 1-888-412-6001 or email at customercare@totalpond.com from Monday to Friday.

Thank you for choosing TotalPond

WARNINGS AND CAUTIONS IMPORTANT SAFETY INFORMATION

Please read these instructions carefully prior to starting up the unit! The water system on which the operation of this product is based requires utmost care and maintenance, possibly also the use of chemicals, in order to prevent and keep the occurrence of micro-organisms and harmful bacteria, especially legionellae that are responsible for legionnaire’s disease, under control. Non-observance of this information about correct maintenance and care can entail the spreading of harmful bacteria. Due to the fact that for decorative purposes, water nozzles distribute water in the air, water droplets containing harmful bacteria can enter your lungs and cause life-threatening diseases.

It is the responsibility of the owner of the water system and its attendant units to ensure their maintenance and care in compliance with the laws, directives and instructions laid down for this purpose. In order to avert harmful contamination, we urgently recommend the user to ensure cleaning and care of the water system and the water feature including the nozzle, and to take all necessary measures to maintain the technical units, such as pumps, tubing, connectors, underwater lighting, and nozzles to keep them in functional order in line with safety aspects. However, the maintenance and care obligation is not limited to the technical products supplied but encompasses the entire system.
We also recommend the owner to keep records of the dates when maintenance and care was carried out, and to document all water tests made in conjunction with the water feature. The owner is solely responsible for guaranteeing the safety of the water feature. Use or maintenance of the units sold and the system are beyond GeoGlobal Partner’s influence. GeoGlobal Partners can only be held liable for manufacturing faults of TotalPond® units.

WARNING
Questions, problems, missing parts? Contact Customer Care Monday – Friday

• Risk of electrical shock. This pump is supplied with a grounding conductor and grounding-type attachment plug. To reduce the risk of electric shock, be certain that it is connected only to a properly grounded, grounding-type receptacle.
• Do not exceed the voltage shown on the pump.
• Always disconnect the pump from the power source before beginning any maintenance or work on the pump.
• Inspect the cord for damage before installation and/or maintenance. Replace the entire pump assembly if the damage is found.
• Do not remove the grounding pin from the power cord plug.
• Risk of electrical shock – This pump has not been investigated for use in swimming pools or marine areas.

CAUTION

• This pump has been evaluated for use with fresh water only.
• Use a proper power source as indicated on the pump label.
• Keep the cord away from high temperatures or other heat sources.
• Do not pump heated liquids.
• Do not let the pump run dry. The pump must be completely submerged for proper operation and cooling.
• Operate in freshwater only. Avoid heavily chlorinated water and water with high pH levels.
• Do not lift the pump by its power cord.

PREPARATION

Before beginning assembly or operation of the product, make sure all parts are present. Compare parts with the package contents list and diagram. If any part is missing or damaged, do not attempt to assemble, install or operate the product. Contact Customer Care for replacement parts.

• Estimated assembly time: 5 minutes.
• Tools required for assembly: hacksaw

PACKAGE CONTENTS

OPERATION INSTRUCTIONS

Step 1. For maximum water flow, use the largest tubing size. Trim the tubing adapter using a hacksaw at the location indicated.
NOTE: If you do not want to use the largest tubing size, skip to Step 2.
Step 2. For item #52325 connect the tubing to the outlet of the pump. For item #52321 connect the adapter to the pump, and connect the tubing to the outlet of the adapter.
NOTE: Tubing is not included.
Step 3. Place the pump inside the pump shield. Pull the drawstring until the pump shield is fully closed around the tubing and power cord. Tie a knot in the drawstring.
Step 4. Place the pump into the water and connect it to a properly grounded electrical outlet.

SPECIFICATIONS

Register your product online! Use your smartphone camera to scan the QR code or visit our website totalpond.com/register

MAINTENANCE & TROUBLESHOOTING

Always disconnect units from the power source before beginning any maintenance or work on the unit

PUMPSHIELD

• Clean the pump shield and (if necessary the pump) regularly depending upon the environment in which it is operated. A drop in water flow is an indication that your pump shield and/or pump require cleaning. The pump shield not only protects your pump but significantly reduces the need for pump maintenance.
• Before cleaning, always disconnect the pump from the power source.
• Remove any large debris from the pump shield. Use a garden hose to rinse off any other dirt from the pump shield.

PUMP
Regular cleaning of the pump may be necessary depending on the environment in which it is operated. Clean the pump when it is visibly soiled or when a drop in performance is detected.

Step 1. Before cleaning, always disconnect the pump from the power source and remove the inlet screen.
Step 2. Remove the impeller housing to expose the impeller assembly. Remove the impeller assembly by gently pulling on the impeller blades.
The impeller is held in place by a magnet. NOTE: This pump uses a very strong magnet. To protect your fingers from potential injury, use caution when removing or inserting the impeller.
Step 3. Use a soft cloth or brush and warm water to clean the impeller, the inside of the impeller housing, and the rotor housing.
Step 4. Reassemble all pump parts, place the pump inside the pump shield, and place in water before reconnecting to the power source.

TROUBLESHOOTING

IF THE PUMP FAILS TO OPERATE

• Check to make sure the power cord is plugged in and the pump is getting power.
• Check the pump outlet and any tubing, fountains, spitters, etc. for kinks or obstructions.
• Remove the inlet screen and/or pump cover, and impeller housing to expose the impeller. Turn the impeller to ensure that it is not broken or jammed. Also, check to make sure that the ceramic shaft or bearings are not broken.

IF THE PERFORMANCE OF THE PUMP IS NOT SATISFACTORY OR THE PUMP DOES NOT FLOW EVENLY

• Check to make sure the pump is completely submerged in water
• Check to make sure the impeller and the impeller housing are clean.
• Check to make sure the pump shield is clean.

WARRANTY

2 Year Warranty
LIMITED WARRANTY
All pumps and electrical products are warranted to the user against defective material and workmanship, under normal working conditions. This warranty period begins on the date of purchase by the original purchaser.

APPLICATION
The warranty covers only properly installed and maintained units. Any damage or modification to the cord or to the unit will terminate the warranty. The pump warranty is limited to applications pumping fresh water in a pond or fountain only. Other liquid applications or extreme temperature uses must be approved in writing by the manufacturer. Receipt and product date codes are required for warranty claims.

WARRANTY CLAIM
Warranty claims must be made by calling Customer Care (at 1-888-412-6001). If the item is determined to be defective, you will be given authorization to return the defective part(s), freight pre-paid, along with proof of purchase.

DISPOSITION
The manufacturer will make a good faith effort for prompt disposition regarding all warranty claims. Returned products will be inspected to determine the cause of failure before the warranty is applied. The warranty does not cover any costs associated with the shipping, handling, installation or removal of products or parts subject to this warranty. For products damaged in transit, a claim should be filed with the carrier.

DISCLAIMER
Any oral statements made about the product by the seller, the manufacturer, the representatives, or any other parties do not constitute warranties, should not be relied upon by the user, and are not part of the contract for sale. The seller’s and manufacturer’s only obligation, and buyer’s only remedy shall be for the manufacturer to either replace and/or repair at the manufacturer’s sole discretion, the product as described above. Neither seller nor the manufacturer shall be liable for injury, loss, or damages for lost profits, lost sales, injury to person or property, or any other incidental or consequential loss arising from any cause whatsoever, no matter whether based upon warranty, contract, negligence or another misuse, and the buyer and user agree that no other remedy shall be available to them. Before using, the buyer and user shall determine the suitability of the product for the intended use, and assume all risk and liability whatsoever in connection therewith. The warranty and remedy described in this limited warranty is an exclusive warranty and remedy in lieu of any other warranty or remedy expressed or implied. All other warranties and remedies are hereby expressly excluded, including but not limited to any implied warranty or merchantability of fitness for any particular purpose. This warranty gives the buyer and user specific legal rights, and the buyer and user may also have other rights which vary from state to state. Some states do not allow exclusions or limitations of incidental or consequential damages, so the above limitations or exclusions may not apply to you.03/23 ©GeoGlobal Partners, LLC. TotalPond is a registered

References

• TotalPond Water Gardening
• Register – TotalPond
• Replacement Parts – TotalPond
• TotalPond Water Gardening

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>