TotalPond 71927 Floating Fountain with LED Lights User Manual

71927 Floating Fountain with LED Lights
User Manual

Item  #71927
FLOATING FOUNTAIN with LED lights
FUENTE FLOTANTE CON LUCES LED

71927 Floating Fountain with LED Lights

Thank you for choosing Total Pond ®
Questions, problems, missing parts? Contact Customer Care Monday – Friday

1-888-412-6001 customercare@totalpond.com

WARNINGS AND CAUTIONS

IMPORTANT SAFETY INFORMATION
Please read these instructions carefully prior to starting up the unit!
The water system on which the operation of this product is based requires utmost care and maintenance, possibly also the use of chemicals, in order to prevent and keep the occurrence of micro-organisms and harmful bacteria, especially legionellae that are  responsible for legionnaire’s disease, under control. Nonobservance of this information about correct maintenance and care can entail the spreading of harmful bacteria. Due to the fact that for decorative purposes, water nozzles distribute water in the air, water
droplets containing harmful bacteria can enter your lungs and cause life- threatening diseases.
It is the responsibility of the owner of the water system and its attendant units to ensure their maintenance and care in compliance with the laws, directives and instructions laid down for this purpose. In order to avert harmful contamination, we urgently recommend the user to ensure cleaning and care of the water system and the water feature including the nozzle, and to take all necessary measures to maintain the technical units, such as pumps, tubing, connectors, underwater lighting, and nozzles to keep them in functional order in line with safety aspects. However, the maintenance and care obligation is not limited to the technical products supplied, but encompasses the entire system.
We also recommend the owner to keep records of the dates when maintenance and care was carried out, and to document all water tests made in conjunction with the water feature. The owner is solely responsible for guaranteeing the safety of the water feature. Use or maintenance of the units sold and the system are beyond Geo Global Partner’s influence. Geo Global Partners can only be held liable for manufacturing faults of Total Pond® units.

WARNING

• Risk of electrical shock. This unit is supplied with a grounding conductor and grounding–type attachment plug. To reduce the risk of electric shock, be certain that it is connected only to a properly grounded, grounding-type receptacle.
• Do not exceed the voltage shown on pump.
• Always disconnect unit from the power source before beginning any maintenance or work on the unit.
• Inspect cord for damage before installation and/or maintenance. Replace the entire pump assembly if damage is found.
• Do not remove the grounding pin from the power cord plug.
• Risk of electrical shock: This unit has not been investigated for use in swimming pools or marine areas.

CAUTION

• This unit has been evaluated for use with fresh water only.
• Use a proper power source as indicated on the pump label.
• Keep the cord away from high temperatures or other heat sources.
• Do not pump heated liquids.
• Do not let the unit run dry. Unit must be completely submerged up to the flotation ring for proper operation and cooling.
• Operate in fresh water only. Avoid heavily chlorinated water and water with high pH levels.
• Do not lift the unit by its power cord.
• This light assembly has not been investigated for use in swimming pools or hot tubs.

PREPARATION

Before beginning assembly or operation of product, make sure all parts are present. Compare parts with package contents list and diagram. If any part is missing or damaged, do not attempt to assemble, install or operate the product. Contact Customer Care for replacement parts.

• Estimated assembly time: 5 minutes.
• No tools required for assembly.

PACKAGE CONTENTS

OPERATION INSTRUCTIONS

Step 1. Place the floating fountain in the pond. If desired, anchor the fountain in the pond using a heavy object (a rock) and using string to secure.
NOTE: Heavy object and string not included.

Step 2. Plug the fountain into a properly grounded electrical outlet.
Step 3. This floating fountain uses a dusk to dawn sensor. At night, the lights will automatically turn on; at sunrise, the lights will automatically turn off.
Make sure the sensor on floating ring is not covered by dirt or debris.

SPECIFICATIONS

https://qrcodes.pro/3H4KOo

Register your product online!
Use your smartphone camera to scan the QR code or visit our website totalpond.com/register
Item number: #71927
Date of purchase: / /___

MAINTENANCE & TROUBLE SHOOTING

Always disconnect units from the power source before beginning any maintenance or work on the unit.

PUMPSHIELD

• Remove the string from the hook to remove the gumshield® . Clean the gumshield ® regularly depending upon the  environment in which it is operated. A drop in water flow is an indication that your gumshield ®  and/or floating fountain require  cleaning. The gumshield ® not only protects your floating fountain but significantly reduces the need for floating fountain maintenance.
• Remove any large debris from gumshield® . Use a garden hose to rinse off any other dirt from the gumshield ®

FLOATING FOUNTAIN

To maximize the performance of the floating fountain, periodically disassemble to clean dirt and debris. When you notice a reduced flow from the fountain, this is a good indicator that it is time to clean the fountain.
Step 1. Before cleaning, always disconnect from the power source.

Step 2. Remove the string from the hook to remove the gumshield®.
Step 3. Turn the floating fountain upside down. Remove the locking screw as shown.

Step 4. Twist the top section counterclockwise. Then pull the top section from the lower by removing the tubing from the top section. You will need to unscrew the wire connector on the inside of the fountain to fully remove the top of the fountain from the bottom.

Step 5. Press the release button on the zip tie to lift the pump out of the basket.

Step 6. To clean the pump, remove the impeller cover to expose the impeller assembly. Remove the impeller assembly by gently pulling on the impeller blades. The impeller is held in place by a magnet.

Use a soft cloth or brush and warm water to clean the impeller and the inside of the impeller housing.
Step 7. Remove the nozzle and clean with warm water.

Step 8. Remove the light ring by turning counterclockwise and clean with warm water.
Step 9. Reassemble all parts making sure to fasten all interior electrical cords safely. Place the fountain into the water, and connect the fountain into a properly grounded electrical outlet.

TROUBLESHOOTING

IF THE LED LIGHTS FAIL TO OPERATE:

• Check to make sure the power cord is plugged in and the light is getting power and the unit is getting power.

• Check to make sure the Dusk-to-Dawn Sensor is covered if you would like the lights to operate during the day. IF THE PUMP FAILS TO OPERATE:

• Check to make sure the power cord is plugged in, the pump is getting power and the pump is fully submerged.

• Remove the impeller cover to expose the impeller. Turn the impeller to ensure that it is not broken or jammed.
  IF THE PERFORMANCE OF THE PUMP IS NOT SATISFACTORY OR THE PUMP DOES NOT FLOW EVENLY:

• Check to make sure the pump is completely submerged in water.

• Check to make sure the impeller and the pump housing are clear of debris.

• Check to make sure the gumshield® is clean.

• Check the pump outlet, nozzle and any tubing for kinks or obstructions.
  For product maintenance videos visit totalpond.com

WARRANTY
1 Year Warranty
LIMITED WARRANTY
All pumps and electrical products are warrantied to the user against defective material and workmanship, under normal working conditions. This warranty period begins on the date of purchase by the original purchaser.
APPLICATION
Warranty covers only properly installed and maintained units. Any damage or modification to the cord or to the unit will terminate the warranty. Pump warranty is limited to applications pumping fresh water in a pond or fountain only. Other liquid applications  or extreme temperature uses must be approved in writing by the manufacturer. Receipt and product date code are required for warranty claims.
WARRANTY CLAIM
Warranty claims must be made by calling Customer Care (at 1-888-412-6001).
If the item is determined to be defective, you will be given authorization to return the defective part(s), freight pre-paid, along with proof of purchase.
DISPOSITION
The manufacturer will make a good faith effort for prompt disposition regarding all warranty claims. Returned product will be inspected to determine cause of failure before warranty is applied. Warranty does not cover any costs associated with the shipping,  handling, installation or removal of products or parts subject to this warranty. For products damaged in transit, a claim should be filed with the carrier.

DISCLAIMER
Any oral statements made about the product by the seller, the manufacturer, the representatives, or any other parties do not constitute warranties, should not be relied upon by the user, and are not part of the contract for sale. The seller’s and manufacturer’s  only obligation, and buyer’s only remedy shall be for the manufacturer to either replace and/or repair at the manufacturer’s sole discretion, the product as described above. Neither seller nor the manufacturer shall be liable for injury, loss or damages for lost  profits, lost sales, injury to person or property, or any other incidental or consequential loss arising from any cause whatsoever, no matter whether based upon warranty, contract, negligence or other misuse, and the buyer and user agree that no other remedy  shall be available to them. Before using, the buyer and user shall determine the suitability of the product for the intended use, and assume all risk and liability whatsoever in connection therewith. The warranty and remedy described in this limited warranty is an  exclusive warranty and remedy in lieu of any other warranty or remedy expressed or implied. All other warranties and remedies are hereby expressly excluded, including but not limited to any implied warranty or merchantability of fitness for any particular  purpose. This warranty gives the buyer and user specific legal rights, and buyer and user may also have other rights which vary from state to state. Some states do not allow exclusionism or limitations of incidental or consequential damages, so the above  limitations or exclusions may not apply to you.

02/23 ©GeoGlobal Partners, LLC.
Total Pond is a registered trademark of |
stone marque depose de GeoGlobal Partners, LLC

References

• The domain name conseils.fr is for sale
• TotalPond Water Gardening
• Register – TotalPond
• Replacement Parts – TotalPond
• TotalPond Water Gardening

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>