TotalPond 52236 Pond Filter with UV Clarifier User Guide

POND FILTER
WITH UV CLARIFIER
Filtro de estanque con clarificador UV
Item/Artículo# 52236
Thank you for choosing TotalPond ® BEFORE RETURNING TO STORE Contact Customer Care: 1-888-412-6001Questions, problems, missing parts?

1-888-412-6001
customercare@totalpond.com
Monday – Friday
Visit totalpond.com for a step by step guide and videos

WARNINGS AND CAUTIONS

IMPORTANT SAFETY INFORMATION
Please read these instructions carefully prior to starting up the unit!
The water system on which the operation of this product is based requires utmost care and maintenance, possibly also the use of chemicals, in order to prevent and keep the occurrence of micro-organisms and harmful bacteria, especially legionellae that are responsible for legionnaire’s disease, under control. Non-observance of this information about correct maintenance and care can entail the spreading of harmful bacteria. Due to the fact that for decorative purposes, water nozzles distribute water in the air, water droplets containing harmful bacteria can enter your lungs and cause life-threatening diseases.
It is the responsibility of the owner of the water system and its attendant units to ensure their maintenance and care in compliance with the laws, directives, and instructions laid down for this purpose. In order to avert harmful contamination, we urgently recommend the user to ensure cleaning and care of the water system and the water feature including the nozzle, and to take all necessary measures to maintain the technical units, such as pumps, tubing, connectors, underwater lighting, and nozzles to keep them in functional order in line with safety aspects. However, the maintenance and care obligation is not limited to the technical products supplied but encompasses the entire system.
We also recommend the owner keep records of the dates when maintenance and care were carried out and to document all water tests made in conjunction with the water feature. The owner is solely responsible for guaranteeing the safety of the water feature. Use or maintenance of the units sold and the system are beyond GeoGlobal Partner’s influence. GeoGlobal Partners can only be held liable for manufacturing faults of TotalPond ® units.
WARNING

• WARNING – Improper connection of the appliance grounding conductor can result in a risk of electric shock.
  Check with a qualified electrician or service representative if you are in doubt about whether the appliance is properly grounded. Do not modify the plug provided with the appliance; if it will not fit the outlet, have a proper outlet installed by a qualified technician.

• Do not operate any appliance if it has a damaged cord or plug, or if it is malfunctioning, or if it is damaged in any manner.

• Always unplug the appliance from the outlet before putting on or taking off parts, before cleaning, or when not in use.

• Connect only to a circuit that is protected by a ground-fault circuit-interrupter (GFCI).

• Risk of Electric Shock – Do not use the UV filter if the quartz tubing around the lamp is broken. Immediately unplug and seek an authorized repair service or discard the unit.

• GROUNDING INSTRUCTIONS – This appliance must be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an appliance-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is installed and grounded in accordance with all local codes and ordinances.

CAUTION

• UV light may cause irritation to the skin and/or eyes. Avoid exposure.
• DANGER – ULTRAVIOLET RADIATION – Disconnect Power Before Replacing Lamp.
• Prolonged or repeated exposure to UV light may have adverse physical effects including, severe damage to your skin and eyes. Seek immediate medical attention for overexposure to UV radiation.
• Keep the cord away from high temperatures or other heat sources.
• Do not lift the light by its power cord.
• This light assembly has not been investigated for use in swimming pools or hot tubs.

IMPORTANT NOTES

• This product is designed to prohibit its operation unless it is fully assembled with the lamp base screwed completely into the housing.
• UV rays are harmful to your eyes and skin. The indicator the portal will remove the harmful effects of the UV light but still allow you to see the bulb operating.
• Do not attempt to operate this product unless the lamp is completely assembled within the light housing.
• This product conforms to the Code of Federal Regulations (CFR) requirements including, Title 21, Chapter 1, Subchapter J, Radiological Health.

Specifications

PACKAGE CONTENTS

PREPARATION

Before beginning the assembly or operation of the product, make sure all parts are present. Compare parts with package contents list and diagram. If any part is missing or damaged, do not attempt to assemble, install or operate the product. Contact Customer Care for replacement parts.

• Estimated Assembly Time: 20 minutes
• Tools required for assembly: Hacksaw

OPERATION INSTRUCTIONS

For maximum water flow, it is recommended that the largest tubing size for your pump is used. If using 3/4 in. ID tubing, skip stepping 2.
Step 1. If using 1 in. ID tubing, trim the tubing adapter using a hacksaw at the location indicated.
Step 2. Place the tubing adapter on the lower hole of the tank and use a gasket for it to be sealed tightly when fastened. Hand-tighten the locking ring inside the tank to secure the tubing adapter in place.
Step 3. Place the bio-balls in the bottom of the tank.
Step 4. Place the fine (blue) filter pad inside the tank. Then place the coarse (black) filter pad inside the tank.
Step 5. Place the tubing adapter on the upper hole of the tank and use a gasket for it to be sealed tightly when fastened. Place the small adapter and small gasket inside the tank and hand-tighten the locking ring to secure everything in place.

Connect the tubing from the UV clarifier to the small adapter.
Step 6. Turn over the filter cover and locate the groove along the outside edge of the raised surface. Inspect the o-ring to find the flat edge. One side will have a curve and the other side will be flat. Insert the flat side of the o-ring down as you place it into the groove.

Step 7. Turn the cover with the o-ring back over and place it in the opening in the filter.
Step 8. Screw the lid onto the top of the tank. Make sure the lid is secure or the filter will leak.
Step 9. Connect the UV Clarifier to a properly grounded electrical outlet.

Step 10. Wait several seconds then check the indicator light to verify if the UV bulb is functioning properly.
NOTE: This UV clarifier includes a safety feature that will not allow the light to turn on if the lamp holder or locking ring is not securely fastened.
Step 11. Unplug your pump from an electrical source before connecting the tubing. Connect tubing from the outlet of the pump to the inlet of the filter (upper hole). Return water to the pond by connecting tubing to the outlet of the filter and to the inlet of a water feature or return to the pond. You can reconnect your pump into a properly grounded electrical outlet at this time.
Note: Pump and tubing are not included.

MAINTENANCE

UV Clarifier
To maximize the performance of the UV clarifier, periodically disassemble the filter to clean dirt and debris from the exterior of the glass tube and inside light housing. Check the UV bulb to make sure that it has not burned out. Replace the bulb as necessary, or after every season.

Step 1. Disconnect the UV Clarifier from the outlet. Allow sufficient time to pass for the light to cool before disassembling the light.

Step 2. Rotate the locking ring counterclockwise to remove the lamp holder. Step 3. To replace the bulb, remove the bulb holder. Carefully remove the old bulb by pulling firmly on the base. Carefully install the new bulb and put the bulb holder back in place.
Step 4. Reinstall the lamp holder and locking ring. NOTE: This UV clarifier includes a safety feature that will not allow the light to turn on if the lamp holder or locking ring is not securely fastened.

Step 5. Reconnect the UV Clarifier to the power source.
Wait several seconds for the light to turn on. Check the indicator light to verify if the light is functioning correctly.

Pressure Filter

• The Pond Filter may require cleaning from time to time for optimal performance.

• Before cleaning, always disconnect the pump from the power source that is connected to the filter.

• Remove the filter pads and clean them with water when they are visibly soiled.

• Return the filter pads with the fine filter pad (blue) in first, and the coarse filter pad (black) on top.
  NOTE: The bio-balls contain beneficial bacteria. At least once a year the entire system should be disassembled and cleaned thoroughly using warm water. This should not be done during the warm season as it may take up to 8 weeks to re-establish the environmental balance. The best time of the year to “break down” your system is in early spring before the water temperatures begin to rise. This is also the ideal time to replace the filter pads.

• Filter pads should be replaced annually or when visibly deteriorating. Use TotalPond ® Replacement Filter Pads item #52232 (#RF13026) for a new fine and coarse filter pad.

• Reconnect the pump to the power source when you are finished.

TROUBLESHOOTING

IF THE UV LIGHT FAILS TO OPERATE:

• Check to make sure the power cord is plugged in and the light is getting power.
• Check to make sure that the lamp holder is screwed completely into the body. (This product will not operate unless it is fully assembled with the lamp holder screwed completely into the body.)
• Check the bulb to make sure that it has not burned out. TotalPond ® Replacement bulbs #52302 (#UVRB)

For more information on product maintenance and maintenance  videos, visit www.totalpond.com

REPLACEMENT PARTS

For replacement parts, contact Customer Care, Monday – Friday:

1-888-412-6001
customercare@totalpond.com

1 YEAR WARRANTY
www.totalpond.com/register
Date of purchase:_ Item number ____
Questions? Call Customer Care at 1-888-412-6001

LIMITED WARRANTY

All pumps and electrical products are warranted to the user against defective material and workmanship, under normal working conditions. This warranty period begins on the date of purchase by the original purchaser.

APPLICATION
The warranty covers only properly installed and maintained units. Any damage or modification to the cord or to the unit will terminate the warranty. Pump warranty is limited to applications pumping fresh water in a pond or fountain only. Other liquid applications or extreme temperature uses must be approved in writing by the manufacturer.  Receipt and product date code are required for warranty claims.

WARRANTY CLAIM
Warranty claims must be made by calling Customer Care (at 1-888-412-6001). If the item is determined to be defective, you will be given the authorization to return the defective part(s), freight pre-paid, along with proof of purchase.

DISPOSITION
The manufacturer will make a good faith effort for prompt disposition regarding all warranty claims. Returned products will be inspected to determine the cause of failure before a warranty is applied. The warranty does not cover any costs associated with the shipping, handling, installation, or removal of products or parts subject to this warranty. For products damaged in transit, a claim should be filed with the carrier.

DISCLAIMER

Any oral statements made about the product by the seller, the manufacturer, the representatives, or any other parties do not constitute warranties, should not be relied upon by the user, and are not part of the contract for sale. The seller’s and manufacturer’s only obligation, and the buyer’s only remedy shall be for the manufacturer to either replace  and/or repair at the manufacturer’s sole discretion, the product as described above. Neither seller nor the manufacturer shall be liable for injury, loss, or damages for lost profits, lost sales, injury to person or property, or any other incidental or consequential loss arising from any cause whatsoever, no matter whether based upon warranty, contract,  negligence or another misuse, and the buyer and user agree that no other remedy shall be available to them. Before using, the buyer and user shall determine the suitability of the product for the intended use, and assume all risk and liability whatsoever in connection therewith. The warranty and remedy described in this limited warranty is an exclusive warranty and remedy in lieu of any other warranty or remedy expressed or implied. All other warranties and remedies are hereby expressly excluded, including but not limited to any implied warranty or merchantability of fitness for any particular purpose. This warranty gives the buyer and user- specific legal rights, and buyer and user may also have other rights which vary from state to state. Some states do not allow exclusions or limitations of incidental or consequential damages, so the above limitations or exclusions may not apply to you.

Show us your ponds and projects!
Share with u

TotalPond ®
Need help? Call Customer Care at 1-888-412-6001 (US)
or visit www.totalpond.com
©GeoGlobal Partners, LLC. TotalPond is a registered trademark of GeoGlobal Partners, LLC

References

• TotalPond Water Gardening
• Register – TotalPond
• Replacement Parts – TotalPond
• Lamp Recycle – Environmental Responsiblility Starts Here
• TotalPond Water Gardening
• Register – TotalPond

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>