deerma DX900 Vacuum Cleaner Instruction Manual

Deerma
Vacuum Cleaner
Continuous large suction can take away the dust It is great at picking up fine dust rapidly and flexibly for each corner.
It is effective in storing the dust not backflow to give you a clean living area.
DX900

STRUCTURE

1. Handgrip
2. Power cord hook
3. Power cord
4. Handgrip| 5. Main body
6. Dust collection box release button
7. Floor brush
8. 2 in 1 brush| 9. Dust collection box
10. Filter
11. Switch
12. Metal tube
---|---|---

ANNOUNCEMENTS

1. Vacuum cleaner is an electric appliance, it must be used in accordance with the conditions of the specification, the specification must be properly preserved for future reference.

2. Check and confirm that the vacuum cleaner uses voltage that must be consistent with the power supply voltage.

3. Do not inhale the following objects, that may damage the vacuum cleaner or cause a fire, resulting in personal injury and other accidents.
   A. heating objects, such as carbon fire, etc.;
   B. cut sharp fragments, such as glass, etc.;
   C. harmful objects or water and liquids (solvents, corrosive agents, etc.)
   D. flammable and explosive substances, such as gasoline or alcohol products.

4.  To clean, repair or temporarily do not use a vacuum cleaner, must be cut off the power supply. When cutting off the power supply is not allowed to pull the power line, should be
   a hand up the plastic part of the plug-pull it out..

5. Avoid the vacuum cleaner be immersed in water, and avoid closing to heating equipment or exposure, so as to avoid fire.

6. Don’t let the children play with the vacuum cleaner, so as to avoid accidents.

7. Please do not use the vacuum cleaner in the following situations:
   A. fall and appear obviously damaged or running is not normal;
   B. power cord breakage.
   In the above case, do not start the machine, in a timely hand it over to our company designated maintenance Department to repair.

8. Avoid long running in the state of the suction mouth blocking, so as to avoid motor damage and vacuum cleaner heating deformation.

9. This product power line and motor using Y type connection, if the power line is damaged, must use the special equipment to be replaced, or send it to the professional maintenance department.

Welcome to use our vacuum cleaner.
Welcome to use our vacuum cleaner. You should read this manual before operation and keep the manual properly for reference later.
Photos and information of products in the picture album are for your reference only and they may not 100% reflect the actual products. Our albums and products are subject to
change without prior notice.

PRODUCT PARAMETER

Product Name: Vacuum Cleaner
Model: DX900
Voltage: 220-240V~ 50-60Hz
Power: 600W
Dust capacity: 1.2L
Vacuum: ≥15KPa
Noise level: ≤82dB(A)

POLARIZED PLUG

This appliance has a polarized plug(one blade is wider than the other). As a safety feature, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way.

PRODUCT USE MODE

Handle push mode

1. Press the dust cup button, take out the dust cup to ensure there is a filter inside it, ensure all parts are connected together fasten, and set the power switch to”0/OFF” before using.
2. Install the handgrip: open handle button, insert handgrip into the main body, then rotate slowly until reaching the bottom then release the button and fasten it to handle assembly.
3. Insert the floor brush according to figure 3 and confirm it’s fasten
4. Insert the power plug into the power supply socket, turn on the switch, machine start to work
5. Turn off the machine and unplug.
6. Roll the power cord to the power cord hook and store the machine upright.

Compact Vacuum Cleaner mode

1. Spin the power cord hook to unwind the power cord
2. Remove the handgrip
3. Remove the floor nozzle
4. Insert the 2-in-1 brush
5. Insert the plug into the outlet, Turn on the switch(ON)
6. Turn off the switch(OFF), Unplug the plug from the outlet
7. Press and hold one side release button and make the dust cup incline, remove the dust cup when the release button is away from the button placement.

CLEANING AND MAINTENANCE

Routine Maintenance
Open the dust cup, take out the filter, wash it by water, and dry it naturally.

Notes

1. filter should be cleaned monthly and washed immediately when there is obvious sediments;
2. filter should be installed correct and dry before using;
3. make sure the steel core and HEPA sponge are in good condition before using.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>