URBAN VITAMIN P30195 Saratoga 5 In 1 Universal Charger User Manual

: June 13, 2024
: URBAN VITAMIN

Table of Contents

URBAN VITAMIN P30195 Saratoga 5 In 1 Universal Charger
Product Overview
SPECIFICATIONS
TO CHARGE THE POWERBANK
EU Declaration of Conformity
More Information
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

URBAN VITAMIN P30195 Saratoga 5 In 1 Universal Charger

URBAN-VITAMIN-P30195-Saratoga-5-In-1-Universal-Charger-
product

Product Overview

URBAN-VITAMIN-P30195-Saratoga-5-In-1-Universal-Charger-
fig-1

(Magnetic) wireless charging area
Phone holder
Wall plug
Type-C output
iOS output
Type-C input/output
USB output
Power button
LCD display

SPECIFICATIONS

Battery capacity: 10.000mAh/3.7V 37Wh
Wall plug Input: 100~240V AC 50Hz/60Hz 0.3Amax.
Type-C Input: 5V-12V PD 18W max.
Type-C Output: 5V-12V PD 20W max.
USB Output: 5V/4.5A, 9V/2A, 12V/1.5A 22.5W max.
Type-C cable output: 5V/3A max.
iOS cable output: 5/2.4A max.
Wireless output: 15W max.

TO CHARGE THE POWERBANK

There are two ways to charge the power bank:

Use the Wall Plug and an AC Outlet
Use the Type-C to USB Cable and a Power Adapter.

Imporant: Only use included accessories or certified and tested accessories to charge the powerbank. Using third party accessories can influence the item safety.

TO CHARGE YOUR MOBILE DEVICE USING THE POWERBANK

By cable:

Plug your cable into the USB port on the power bank, the other end goes into your device.
The power bank will take approximately two hours to charge your mobile device to 95%.
After you have charged your device, recharge the power bank before using again.

Wireless:

Make sure your phone is compatible for wireless charging.
Switch on the powerbank using the on button.
Put your wireless charging enabled device on the wireless charging surface of the powerbank.
If your device supports MagSafe, the magnets in your iPhone and inside the item will connect with each other when you put the item on the device. This item is also compatible with other items, the magnetic function just won’t work.

USING THE BUILT-IN STAND

Gently pull out the stand. Pull it all the way out.
You can now place the Power Bank on a flat surface and place your phone on the stand either vertically or horizontally.

CHECKING THE BATTERY LEVEL

Quick press the power button and the current percentage level will be shown on the digital screen.
The display and power will be turned off automatically.

WARNING

Do not vigorously shake, hit or throw the product.
If the power bank is not used for long time, please charge/discharge it once every three months to ensure the service life of the product.
Some phone cases may block the wireless charging.
Do not place other materials, like metal objects, magnets, and magnetic stripe cards, between the mobile device and the wireless charger pad.
Check your mobile device’s battery percentage using the charging icon displayed on the screen of your phone.
When the mobile device is not placed on the charging surface accurately, your mobile device may not charge properly.
If you use the wireless charger in areas with weak network coverage, you may lose your network reception.
Please do not expose this device to moisture or heat sources.
This is not a toy, not suitable for children under the age of 7.
Only use included or certified accessories ( cables, chargers) to use the item.
Unsafe cables or chargers can influence the safety of the item.
Do not insert the integrated cables into a charger.

EU Declaration of Conformity

XD Connects B.V. hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Derective 2014/53/EU.The complete Declaration of Conformity can be found at www.xdconnects.com > search on item number.