MEEC TOOLS 018253 40V Battery Powered Lawn Mower Instruction Manual

018253 40V Battery Powered Lawn Mower
Instruction Manual

OPERATING INSTRUCTIONS

Important! Read the user instructions carefully before use. Save them for future reference. (Translation of the original instructions)
Jula reserves the right to make changes.
For latest version of operating instructions, see www.jula.com
JULA AB, BOX 363, SE-532 24 SKARA
2023-04-25
© Jula AB

|
---|---

SAFETY INSTRUCTIONS

WARNING!
Read all warnings, safety instructions and other instructions carefully before use. Failure to follow all the instructions and safety instructions can result in the risk of electric shock, fire and/or serious personal injury.

• Save these instructions and safety instructions for future reference.
• The term “power tool” in all the warnings below refers to mains-powered (corded) or battery-powered (cordless) power tools.

WORK AREA

• Keep the work area clean and well lit. Dark and cluttered work areas increase the risk of accidents and injuries.
• Do not use power tools in explosive environments, such as in the vicinity of flammable liquids, gas or dust. Power tools produce sparks that can ignite dust and fumes.
• Keep onlookers, especially children, and pets at a safe distance when using power tools. You can easily lose control of the product if you are distracted.

ELECTRICAL SAFETY

• Avoid body contact with earthed surfaces such as pipes, radiators, cookers and refrigerators. There is an increased risk of electric shock if your body is earthed.
• Do not expose power tools to rain or moisture. There is a greater risk of electric shock if water gets into a power tool.

PERSONAL SAFETY

• Stay alert. Pay attention to what you are doing, and use your common sense when working with power tools. Never use power tools if you are tired or under the influence of drugs, alcohol or medication. Remember that a fraction of a second of inattention or negligence can result in serious personal injury.
• Use personal safety equipment. Wear safety glasses. Depending on the type of product and how it is used, safety equipment such as dust masks, non-slip safety shoes, safety helmets and ear protection reduce the risk of personal injury.
• Avoid accidental starting. Check that the power switch is in the OFF position before plugging in the plug or battery, or lifting/ carrying the product. Carrying a power tool with your finger on the switch, or connecting a tool to the mains supply when the switch is in the ON position, increases the risk of accidents and injuries.
• Remove any adjuster keys and the like before starting the product. Spanners or the like that are left in a rotating part of the product can cause personal injury.
• Do not overreach. Always maintain a firm footing and good balance. This ensures better control over the power tool in unexpected situations.
• Wear suitable clothing. Do not wear loose-fitting clothing or jeep Weller. Keep your hair, clothing and gloves away from moving parts. Loose-fitting clothing, jeweler and long hair can get caught in moving parts.
• Check that the grass catcher is correctly installed and working.

USE AND CARE

• Do not force the power tool. Use the correct power tool for the planned work. The power tool does the job better and safer when used at the rate for which it was designed.
• Do not use the power tool if it cannot be switched on and off with the power switch. Power tools that cannot be controlled with the power switch are dangerous and must be repaired.
• Pull out the plug and/or remove the battery before making any adjustments, changing accessories or putting the power tool away. These safety precautions reduce the risk of accidentally starting the power tool.
• Store power tools out of the reach of children when not in use. Never allow children, or anyone who is unfamiliar with the power tool and these instructions, to use the tool. Power tools are dangerous if used by inexperienced persons.
• Maintain and take good care of power tools. Check before use that moving parts are properly adjusted and do not jam, and that no parts are damaged. Check for other factors that could affect the functionality of the product. Have the product repaired before using it again. Many accidents are caused by poorly maintained power tools.
• Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to jam and are easier to control.
• Use the power tool, accessories and bits etc., in accordance with these instructions, taking into account the actual working conditions and the work that is to be done. It can be dangerous to use power tools for purposes other than those for which they are intended to be used.
• Do not use the product if a handle or safety device is dismantled or damaged. Do not dismantle the product or attempt to modify or repair it – risk of personal injury and/or material damage.
• Look around the work area for potential risks that you might not notice when the product is in use.
• Do not use the product when other persons, especially children, or pets, are in the vicinity.
• Be careful when working on slopes.
• Always maintain a firm footing and good balance, and walk slowly.
• Work across slopes, never up and down.
• Be very careful when changing direction – risk of tripping.
• Do not mow very steep slopes.
• Be very careful when going backwards or pulling the product towards you.
• Do not tilt the product when starting the motor.
• Stand at a safe distance behind the handle.
• Keep your hands and feet away from moving parts when starting the motor.
• Switch off the product before tilting it and before moving it, for example to and from the lawn or over paths.
• Never cross over gravel surfaces with the motor running – risk of stones flying out.
• Switch off the product and wait until all moving parts have completely stopped before lifting or carrying the product.
• Switch off the product and wait until all moving parts have completely stopped before adjusting the cutting height.
• Never open the ejector flap when the motor is running.
• Switch off the product and wait until all moving parts have completely stopped before removing the grass catcher. Firmly replace the grass catcher after emptying.
• If possible, avoid cutting wet grass.
• Do not use the product in explosive environments, for example near flammable liquids, gas or dust. The product produces sparks, which can ignite dust and fumes.
• Never leave the product unattended when plugged in.
• Use the product carefully. Never run with the product.
• Be careful to make sure your fingers do not fasten between the blades and fixed parts of the product – risk of serious personal injury.
• Do not mow wet ground, near streams/ ditches or steep slopes – risk of losing control.

IMPORTANT:

• Do not use the product to cut bushes, creeping plants or vegetation on roofs or balconies, to remove rubbish from pathsor to cut twigs – risk of serious personal injury.
• Do not use the product in an attempt to level irregularities in the lawn, such as molehills.
• Do not use the product to drive other products.

USING AND HANDLING BATTERY POWERED PRODUCTS

• Only charge the battery with the charger recommended by the manufacturer. A charger intended for one type of battery can result in a fire risk if used with another type of battery.
• Only use batteries recommended by the manufacturer. The use of other batteries can result in a risk of personal injury and/ or fire.
• When the battery is not in use keep it away from metal objects such as paper-clips, coins, keys, nails, screws and other small metal objects that can short circuit the terminals. Short circuiting discharges large amounts of energy and can cause a fire and/or serious personal injury.
• Failure to handle the battery carefully can cause fluid to leak from the battery. Avoid contact with battery fluid. If you get battery fluid on your skin, rinse immediately in plenty of fresh water. If you get battery fluid in your eyes, rinse your eyes with clean water for at least 10 minutes and then seek medical attention immediately. Fluid leaking from the battery can cause irritation or burns.
• Read all the instructions and safety instructions for the charger and/or battery.

SERVICE

• The power tool must only be serviced by qualified personnel using identical spare parts. This will ensure that the power tool remains safe to use.

ADDITIONAL SAFETY INSTRUCTIONS

• Read all the warnings, safety instructions and other instructions carefully before use and familiarize yourself with the controls on the product and how to use them, their applications, limits and potential risks. It is recommended to undertake a suitable training course.
• The product is not intended to be used by persons (children or adults) with any form of functional disorders, or by persons who do not have sufficient experience or knowledge on how to use it, unless they have received instructions concerning the use of the product from someone who is responsible for their safety. Keep children under supervision to make sure they do not play with the product.
• Switch off the product and remove the battery in the following situations. – Before leaving the product unattended. – Before checking, adjusting, cleaning or doing any other work on the product. – If the product starts vibrating abnormally.
• Carefully inspect the area where the product is to be used and remove any foreign objects that can fasten and be thrown out by the product. Ejected objects can cause serious personal injury and/or material damage.
• Switch off the product and wait until all moving parts have completely stopped before putting it down.
• Switch off the product before transporting it.
• Do not use the product if a handle or safety device is dismantled or damaged. Do not use the product if it is not fully assembled.
• Do not dismantle the product or attempt to modify or repair it, this will invalidate the warranty and can result in a risk of personal injury and/or material damage.
• Only use spare parts recommended by the manufacturer. Remove the battery before changing accessories and/or spare parts. Fit accessories and/or spare parts in accordance with the manufacturer’s instructions.
• After a collision with an object. Check the product and have any damage repaired before using it again.
• If the product starts to vibrate abnormally. Always check the product before use to make sure that the blade, blade fastener and cutter unit are not worn or damaged. Always replace the complete set of blade and blade fastener if they are worn or damaged to avoid imbalance. Check that the safety and warning labels on the product are intact and legible. Replace any labels that are illegible or have gone missing.

SAFETY INSTRUCTIONS

• Only use the product in daylight, or in good artificial lighting.
• Wear safety glasses, ear protection, safety gloves, non-slip safety shoes and heavy-duty long trousers.
• Do not wear loose-fitting clothing, jeweler or watches that can get caught in moving parts. Do not use the product barefoot or wearing open shoes.
• Do not overreach. Always maintain a firm footing and good balance. Only use the product on a level, stable surface.
• Be careful to avoid slipping or falling, especially when walking backwards.
• Never run with the product.
• Check that the power switch is in the OFF position before putting in the battery. The power switch and lock must not be in the locked position.
• Always check before use that all the screw unions and other unions are properly tightened, that all the safety devices are in place and working, and that moving parts do not jam.
• Never dismantle or modify the safety devices on the product.
• Do not use the product if it is damaged, or if all the safety devices are not in place and working properly. Replace damaged or worn parts.
• Do not use the product in an explosive environment, e.g. near flammable liquids, gas or dust – risk of fire and/or explosion.

WARNING! The product produces an electromagnetic field when in use. This field can in some circumstances affect active or passive medical implants. If you have a medical implant you should consult your doctor and/or the manufacturer of the medical implant before using the product to reduce the risk of serious or fatal personal injury.
SAFETY INSTRUCTIONS FOR LITHIUM-ION BATTERIES

• Do not open the battery – risk of short circuiting.
• Keep batteries away from water, moisture and sources of heat such as direct sunlight – risk of explosion.
• The battery can emit fumes when used incorrectly or if damaged. Such fumes can irritate the respiratory system. Breathe in fresh air. Seek medical attention if the complaint persists.
• Only use batteries of the type recommended by the manufacturer, with the voltage specified on the type plate on the product. The use of other batteries can result in a risk of fire, explosion, personal injury and/or material damage.
• The battery voltage must correspond to the charging voltage, otherwise there is a risk of fire and/or explosion.
• Only charge the battery with the charger recommended by the manufacturer. Charging other batteries can result in a risk of personal injury and/or fire.
• Never attempt to open the battery. Keep the battery away from sharp objects and metal objects, and do not subject it to knocks or blows – risk of short-circuiting, fire, explosion and/or personal injury.
• Read all the instructions and safety instructions for the charger and/or battery.

RISK OF FIRE AND/OR EXPLOSION

• Never use damaged, defective or deformed batteries. Never attempt to open the battery or subject it to knock and blows.
• Never charge the battery near acid and/ or flammable gas or other substances.
• Do not expose batteries to heat or naked flames.
• Do not charge the battery at temperatures below 10°C or above 40°C, this can damage the battery.
• Do not expose the battery to high temperatures or strong sunlight for long periods.
• The battery will get hot during long periods of use. Allow it to cool before charging.
• Never short-circuit the battery terminals.
• The battery must be packed in a plastic bag or box, or the battery terminals sealed, before transport or storage and before waste disposal of the battery.

SYMBOLS

The following symbols may occur on the product.

| **** Read the instructions.
---|---

| **** WARNING!

| **** Wear ear protection.

| **** Wear safety glasses.

| **** Wear safety shoes.
| Do not expose the product to rain or moisture.

| Always remove the safety key before maintenance.
| Always remove the battery before maintenance.

| Remove any objects before use that can fasten in, or be thrown out by, the product.
****| Ejected objects can cause serious personal injury and/ or material damage. Keep onlookers, especially children, and pets at least 15 metres from the work area.

| Work across slopes, never up and down.
| Sharp blades – risk of personal injury.
| Never put your hands or feet near, or under, rotating parts.
| Guaranteed sound power level.
| Approved in accordance with the relevant directives.
| Recycle the product at the end of its useful life in accordance with local regulations.

TECHNICAL DATA

Always wear ear protection.
The declared vibration value, which has been measured by a standardized test method, can be used to compare different tools with each other and for a preliminary  assessment of exposure. The measurement values have been determined in accordance with EN 60335-2-77:2010.
WARNING!
The actual vibration level when using power tools may differ from the specified maximum value, depending on how the tool is used. It is therefore necessary to determine which safety precautions are required to protect the user, based on an estimate of exposure in actual operating conditions (taking into account all stages of the work cycle, e.g. the time when the tool is switched off and when it is idling, in addition to the start-up time).
DESCRIPTION

1. Safety catch
2. Drive handle
3. Ejector opening
4. Grass catcher
5. Lever to adjust the mowing height
6. Battery compartment cover
7. Clamp
8. Safety key
   FIG. 1

ASSEMBLY

UNPACKING

• Remove all parts from the packaging.
• Remove all packaging materials and any transport protection.
• Check that no parts are missing.
• Inspect the product and accessories for damage.
• If possible save the packaging until the warranty has expired.

NOTE: Do not allow children to play with the packaging material. Keep plastic bags, plastic film and small parts out of the reach of children – risk of suffocation.
ASSEMBLY OF THE LAWN MOWER

1. Unpack the product and all the accessories and check that all the parts are included.

2. Fit the bottom handle on the product with a quick-coupling (c) on each side.
   FIG. 2
   FIG. 3

3. Fit the top handle with a screw (a), a washer (b) and a quick-coupling (c) on each side. Make sure that the cords, which are connected later, are not in the way.
   FIG. 4
   FIG. 5

4. Fit the cords on the handle with the clips (7).
   FIG. 6

5. Open the grass catcher (4) and press the plastic clips on the frame.
   FIG. 7

6. Lift up the ejector flap (3) with one hand and hook on the grass catcher (4).
   FIG. 8

INSERTING THE BATTERY
Open the battery compartment (6). Put the battery in the holder. FIG. 9

USE
Battery and charger sold separately in Jula’s department stores and at www.jula.com.
INTENDED USE
The product is only intended for household use and is not suitable for commercial purposes.
The product is intended for use in private gardens etc. It is not intended for use in public places, sports facilities, or agriculture.
SAFETY KEY
The product can only be started when the safety key (8) is inserted. Remove the safety key from the product after use.
FIG. 10

STARTING/SWITCHING OFF

1. Keep the safety catch (1) pressed in.
2. Press in the drive handle (2). The motor starts.
3. Release the drive handle to switch off (2).
   FIG. 11

WARNING!
The blade continues to move for a short while after the drive handle is released.
ADJUSTING THE HEIGHT OF THE HANDLE

1. Release the quick-couplings on the left and right side of the handle.
2. Move the handle to the required position and tighten the quick-couplings.

ADJUSTING THE MOWING HEIGHT
WARNING!
Switch off the product and remove the safety key before adjusting the mowing height.

1. Push out the adjusting lever for mowing height (6).
2. Check that the lever (6) clicks in place in one of the slots. FIG. 12

LAWN MOWING

• A lawn consists of different types of grass. Mowing a lawn often benefits grass with strong roots and forms a thick and firm lawn.
• The normal height for a lawn is about 4–5 cm. Do not cut more than about 1/3 of the height at one go, i.e. from 7–8 cm to normal height.
• Do not mow the lawn shorter than 4 cm, this can cause it to dry out.
• Cut high grass in steps.
• Overlap each row a little when mowing.
• If possible, avoid cutting wet grass. Cut the grass when it is dry.
• Be very careful when changing direction on slopes. Always maintain a firm footing and good balance. Work across slopes, never up and down.
• Do not mow slopes with a gradient of more than 15° – risk of personal injury.

WARNING!
Be very careful when going backwards or pulling the product towards you – risk of tripping over.

GRASS CATCHER
The grass catcher has a level indicator. It is held open by the flow of air produced by the product when in use. When the flap closes during the mowing this means that the grass catcher is full and must be emptied. Check that the opening under the flap is clean and lets through air, otherwise the level indicator will not work properly. Empty the grass catcher if grass cuttings are left on the ground.
WARNING! Switch off the product, wait until all moving parts have completely stopped and remove the safety key before removing the grass catcher.
Emptying the grass catcher

1. To remove the grass catcher, lift up the flap with one hand, grip the grass catcher handle with the other, and lift out the grass catcher.
2. When the grass catcher is removed the flap falls down and covers the ejector opening.
3. If there is grass left in the opening, pull the lawn mower backwards about 1 metr to make it easier to start the motor.
4. Never clear the mower deck or blade with your hands or feet – use a brush or other suitable tool. Clean the grass catcher after it has been used for best functionality, especially the air grille.
5. Lift up the ejector flap with one hand and hook on the grass catcher from above with the other hand. Only fit the grass catcher when the product is switched off and the moving parts are not moving.

MAINTENANCE

Clean the product after it has been used.

1.  Remove the battery.
2. Remove the grass catcher.
3. Clean the product with a brush after use.
4. Carefully remove residual grass from underneath the mower deck with a wooden stick or something similar.
5. Keep the ventilation openings free from dust and dirt. Never pour or swill water on the product.
6. Clean the motor casing with a damp cloth. Do not use detergents or solvents. This can damage the plastic parts on the product. Wipe the engine casing all over.
7. Check the condition of the blade.

GRASS CATCHER
The grass catcher can be rinsed with water when removed from the lawn mower.
REMOVING AND SHARPENING THE BLADE
When the blade becomes blunt it can be removed and sharpened.

1. Undo the screw holding the blade.
2. Release the blade and carefully clean the contact surfaces. If the blade is very worn it should be replaced with a new one.
3. Sharpen the blade.
4. Fit the blade on the lawn mower and firmly tighten the screw
5. Only use spare parts recommended by the manufacturer. FIG. 13

STORAGE
NOTE: Remove the safety key before putting into storage.

• Store the lawn mower in a dry place and frost-free (10–25°C).
• Store the battery and lawn mower separately.
• Charge the battery before putting into storage if it is not going to be used for some time.
• Never let brake fluid, petrol, oil-based products, penetrating oils, etc. come into contact with plastic parts.
• Store the lawn mower away from corrosive substances, such as salt and fertiliser.

TROUBLESHOOTING

must be carried out by an authorised electrician.
The safety catch is defective.| Take the product to an authorised service centre, or other qualified personnel, to be checked and repaired.
Defective motor.| Take the product to an authorised service centre, or other qualified personnel, to be checked and repaired.
The safety key is not inserted.| Insert the safety key.
The motor stops when in use.| The battery is flat.| Charge the battery.
The battery is mot correctly inserted.| Insert the battery correctly.
The battery is defective.| Clean the terminals, replace with a new battery of the same type.
Reduced performance.| The battery is flat.| Charge the battery.
The battery is not fully charged.| Charge the battery.
The grass is too high.| Cut in steps.
Heavy vibration.| The blade is not properly fitted.| Check the blade.
The blade blocked by a foreign object.| Unblock the blade.
The blade is damaged.| Replace the blade.
Inadequate grass catching.| The grass catcher is full.| Empty the grass catcher.
The ejector opening is blocked.| Clear the ejector opening.
The mowing height is set too low.| Adjust to a suitable mowing height.
The lawn is mown unevenly.| The blade is blunt.| Sharpen or replace the blade.
The grass is too high.| Cut in steps.

References

• Jula – products for home and garden
• Jula - Mikään ei voi pysäyttää sinua nyt!
• Jula - ingenting kan stoppe deg nå!
• Jula - Teraz nic Cię nie powstrzyma!
• Jula – inget kan stoppa dig nu!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>