EDISON EVO Speedmaster 365 Universal E Scooter Tuningkit Installation Guide

Speedmaster 365 Universal E Scooter Tuningkit

Product Specifications

• Product Name: Speedmaster 5365 Scooter Controller Kit
• Compatibility: Xiaomi scooters
• Components Included:
  • Dashboard cache
  • Dashboard
  • Battery adapter
  • Xiaomi engine adapter
  • Adapter HALL1
  • Adapter HALL2
  • Brakes indicator adapter
  • Xiaomi accelerator, brake, and headlight adapter

Product Usage Instructions

1. Uninstallation of Old Components

1. Unplug the battery cable.
2. Disconnect the cables from the existing controller.

2. Installation of Speedmaster 5365 Kit

1. Using the existing screws, install the Speedmaster 5365 in
   place of the old controller.

2. On the handlebar section, remove the dashboard cache and
   unscrew the board. Disconnect the cables to remove the
   dashboard.

3. Replace the old controller link cable with the new kit
   cable.

4. Connect the wires to the Speedmaster controller.

5. Finalize the installation by connecting the battery wire
   last.

3. Dashboard Installation

1. Connect the Speedmaster dashboard to the controller.

2. Screw the new dashboard back into its compartment and clip the
   cache back on.

3. Enjoy your ride with the new energized system!

Frequently Asked Questions (FAQ)

Q: Is the Speedmaster 5365 compatible with all Xiaomi

scooters?

A: Yes, the Speedmaster 5365 is compatible with Xiaomi
scooters.

Q: Do I need any special tools for installing the kit?

A: Basic tools like screwdrivers may be needed for installation,
but no special tools are required.

INSTALLATION GUIDE GUIDE D’INSTALLATION
UNLEAS H THE FULL POWER OF YOUR SCOOTER!
This kit is intended for use in controlled environments such as private racetracks or designated non-public areas. Le kit SPEED MASTER 365 ne doit pas être installé pour un usage sur route mais uniquement sur chemin privé ou piste réglementée.

KI T OVERVIEW

1 3

8 1 Controller / Contrôleur

2 Dashboard cache / Cache tableau de bord

3 Dashboard / Tableau de bord

4 Com. cable / Câble de communication

5

9

5 Battery adapter / Adaptateur batterie

6 Xiaomi engine adapter / Adaptateur moteur Xiaomi

7 Adapter HALL1 / Adaptateur Hall 1

7

8 Adapter HALL 2 / Adaptateur Hall 2

9 Brakes indicator adapter / Adaptateur feu stop

10 Xiaomi accelerator, brake and headlight adapter

/ Adaptateur accélérateur, frein et phare Xiaomi
2

6
4 10

1 Remove the battery cover by first unscrewing the retaining screws. Retirer le cache-batterie en dévissant préalablement les vis de maintien.

Unplug the battery cable.
2
Débrancher le câble d’alimentation batterie.

Unplug the cables from the controller.
3
Débrancher les câbles du contrôleur.

4 Remove the controller by first unscrewing the retaining screws. Oter le contrôleur en dévissant préalablement les vis de maintien.
Using the existing screws, instal the Speedmaster 5 365 in replacement of your old controller.
Installer le speedmaster 365 en lieu et place de votre ancien contrôleur. utilisez les vis existantes pour maintenir votre nouveau contrôleur.

6 On the handlebar section: Clip out the cache of your dashboard, then, untie the screws of the board. Unplug the 4 cables in order to take out the board.
Sur la partie guidon: Retirer le cache de votre tableau de bord, puis, dévisser les vis de maintien de la carte. Enfin ,déconnecter les 4 câbles afin de libérer cette dernière.

7 Replace the old controller link cable by your new kit cable. (Slide it inside the stem)
Remplacer le câble de liaison de votre ancien contrôleur (dans le tube de potence), par votre nouveau câble.

8 Link these wires to your Speed Master controller, making sure to connect 9 Finalize the installation of your Speed Master by connecting

the battery wire last.

the dashboard sockets.

Raccorder ces câbles au contrôleur Speed Master, en vous assurant de connecter le fil de la batterie en dernier.

Connecter le tableau de bord Speed Master.

10 Screw the new dashboard back in it’s compartment, clip the cache. Then, enjoy the ride with your new energized system.
Finaliser l’installation en re-vissant votre nouvelle carte dans son logement (tableau de bord) clipser le cache. Profiter enfin de votre nouveau système.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>