FRONT RUNNER F-LAMS003 Mercedes Sprinter H2 Ladder

Specifications

• Model: Front Runner Mercedes Sprinter H2 Ladder
• Model Number: LAMS003

Description

The Front Runner Mercedes Sprinter H2 Ladder is a durable and secure ladder designed specifically for Mercedes Sprinter H2 models. It is constructed with high-quality materials for long-lasting performance.

Features

• Easy to install
• Includes all necessary components
• Sturdy construction
• Compatible with Mercedes Sprinter H2 models

Product Usage Instructions

Get Organized

Before starting the installation process, ensure that you have all the components listed below:

• * 1 X Ladder Top Assembly

  • 12 X M6 x 16 Button Head Bolt
  • 2 X Ladder Side Top

Fit and Secure

Secure the Ladder Rungs

Secure the Ladder Rungs to the Top and Bottom Ladder Sides using M6 x 25 Thread Forming Screws. Fully tighten all fasteners with the specified Torque.

Join the Ladder Assemblies

Join the Ladder Top and Bottom assemblies using the Outer and Inner Joiner Channels. Secure using M6 x 16 Button head bolts with M6 Nyloc Nuts in the center. Secure the middle Rungs using Thread Forming Screws.

FAQ

• Q: What should I do if I encounter any issues during installation?
• A: If you have any questions or encounter difficulties during the installation process, please contact Front Runner for assistance. Failure to install the product correctly may result in damage.
• Q: Can I customize the placement of the ladder on my vehicle?
• A: Yes, you can choose where you want to locate the ladder on your vehicle. Ensure to follow the provided instructions for securing the ladder to the vehicle and van rack.

READ ME

Thank you for purchasing a Front Runner Mercedes Sprinter H2 Ladder. Before you start, take a moment to familiarize yourself with the Fitting Instructions and the included components. Refer to Page 2 for a list of all the components, quantities and tools required.

IMPORTANT WARNING

• IT IS CRITICAL THAT ALL FRONT-RUNNER PRODUCTS BE PROPERLY AND SECURELY ASSEMBLED AND ATTACHED TO YOUR VEHICLE. IMPROPER ATTACHMENT COULD RESULT IN AN AUTOMOBILE ACCIDENT AND COULD CAUSE
• SERIOUS BODILY INJURY OR DEATH. YOU ARE RESPONSIBLE FOR ASSEMBLING AND SECURING ALL FRONT RUNNER PRODUCTS TO YOUR VEHICLE, CHECKING THE ATTACHMENTS PRIOR TO USE, AND PERIODICALLY INSPECTING
• THE PRODUCTS FOR ADJUSTMENT, WEAR AND DAMAGE. THEREFORE, YOU MUST READ AND UNDERSTAND ALL OF THE INSTRUCTIONS AND PRECAUTIONS SUPPLIED WITH YOUR FRONT-RUNNER PRODUCT PRIOR TO INSTALLATION
• OR USE. IF YOU DO NOT UNDERSTAND ALL OF THE INSTRUCTIONS AND CAUTIONS, OR IF YOU HAVE NO MECHANICAL EXPERIENCE AND ARE NOT THOROUGHLY FAMILIAR WITH THE INSTALLATION PROCEDURES, YOU SHOULD
• HAVE THE PRODUCT INSTALLED BY A PROFESSIONAL INSTALLER OR OTHER QUALIFIED PERSONNEL.

GET ORGANIZED

OVERWIEV

TOOLS NEEDED

FIT AND SECURE

1. Apply a little Anti-seize/oil on the screw threads before inserting.
   Secure the Ladder Rungs (Item 8) to the Top and Bottom Ladder Sides (Items 3 &

4. using M6 x 25 Thread Forming Screws (Item 10). Fully tighten all fasteners.
   Tightening Torque:
   M6: 8-10Nm / 5.9 ft-lb – 7.38 ft-lb

2. Join the Ladder Top and Bottom assemblies using the Outer and Inner Joiner Channels (Items 5 & 6). Secure using M6 x 16 Button head bolts with M6 Nyloc Nuts (Items 2 & 12) in the center.
   Secure the middle Rungs (Item 8) using Thread Forming Screws (Item 10) as shown.

3. Secure the Ladder Top (Item 1) to the Ladder Top Side Bracket, using M6 x 20 Button Head Bolts (Item 2), before securing this assembly to the Ladder Side (Item 3) using M6 x 16 Button Head Bolts and M6 Nyloc Nuts (Items 2 & 12) as shown.
   Place M6 Nut Caps (Item 11) overall Nyloc Nuts.

4. Loosely secure the Ladder Base (Item 7) to the bottom assembly of the ladder, using M6 x 16 Button Head Bolts and M6 Nyloc Nuts (Items 11 & 12) as shown. Slide the last Rung (Item 8) into place and secure using Thread Forming Screw (Item 10). Fully tighten all fasteners. Place M6 Nut Caps (Item 11) overall Nyloc Nuts.

5. Loosely fit the Base Mount (Item 9) to the Ladder Base ( Item 7) using M8 x 19 x 2 Flat Washer and M8 Nyloc Nut (Items 15 & 16) as shown.
   The Base mount will be fully tightened in 2.7.

6. Choose where you want to locate the Ladder on the vehicle. To secure the Ladder to the Van Rack and the vehicle, remove the end cap from the Side Profile. Loosen the required slats. Slide two M8 Nyloc Nuts (Item 16) into the Side Profile. Loosely fit the Ladder using the M8 Nyloc Nuts and M8 x 16 Button Head Bolts (Item 19) as shown.
   NOTE : This Ladder can not be mounted behind the sliding side door .

7. Mark the holes in the Ladder Base Mount onto the bottom lip of the vehicle’s side panel. Drill 6.5mm holes on the marks you made. Apply Anti-Rust around all holes drilled. Secure the Ladder Base Mount to the bottom lip using M6 x 20 Button Head Bolts, M6 x 20 x 2 and M6 Nyloc Nuts (Items 12, 13 & 14) as shown. Apply pressure from the top before fully tightining the M8 Nyloc Nuts fitted in 2.5. Place M8 Nut Caps on the M8 Nyloc Nuts.

FINISH

Congratulations! You did it. Take a step back and admire your work!

INSTALL OTHER VEHICLE AND RACK ACCESSORIES
Now’s the time to visit your favourite Front Runner Dealer in person or online. Be sure to tag us. We love to see our gear in action!

FrontRunnerOutfitters #BornToRoam

Share your adventures on:

References

• FRONTRUNNEROUTFITTERS.COM

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>