Audiocrazy AC-RC87BT Speaker FM Radio Bluetooth Instruction Manual

Audiocrazy AC-RC87BT Speaker FM Radio Bluetooth

Product Information

Specifications

• Model : AC-RC87BT
• Band : AM/FM
• Power Source : AC Power or Dry Batteries

Safety Precautions

Please read this instruction manual carefully before using this product. Pay attention to the warnings and precautions listed below:

• Do not expose the unit to rain or moisture to avoid fire or electric shock accidents.
• Ensure that the grid voltage matches the specified voltage in the manual before using AC power to operate the unit.
• Do not open the casing or attempt to repair the unit yourself.
• Avoid placing foreign objects in the gaps of the unit.
• If any abnormality such as smell or smoke is noticed, unplug the power plug immediately and stop using the unit.
• Avoid actions that may damage the power cord and plug, such as immersing them in water, exposing them to high temperatures, or bending, twisting, stretching, stressing, or bundling them.
• Do not use damaged power plugs or loose sockets.
• Keep the unit out of reach of infants and young children.
• Avoid touching the rod antenna and power plug during thunder to prevent electric shock.
• Regularly clean the dust on the power plug to prevent short circuits and malfunctions.

Product Usage Instructions

Power Source

The BT/AM/FM 2BAND RADIO can be powered using either AC power or dry batteries.

Using AC Power

1. Ensure the grid voltage matches the specified voltage in the manual.
2. Insert the power plug into a correctly functioning socket.

Using Dry Batteries

1. Open the battery compartment located on the back of the radio.
2. Insert the required number and type of dry batteries, following the polarity markings inside the compartment.
3. Close the battery compartment securely.

Volume Control

Pay attention to the volume and avoid listening at high volume for extended periods to prevent damage to your hearing.

Cleaning

To clean the unit, follow these steps:

1. During maintenance, soak a soft cloth in clean water or soapy water and wring it out.
2. Gently wipe the exterior of the unit with a damp cloth, avoiding alcohol or thinner.
3. Avoid using water on the power plug to prevent discoloration, deformation, electric shock, or malfunctions.

FAQ

• Q: Can I use the radio next to a gas stove?
  • A: No, it is not recommended to use the radio next to a gas stove or in places with flammable gases as it may cause discoloration, deformation, fire, or electric shock.
• Q: Can I use alcohol or thinner to clean the radio?
  • A : No, it is not recommended to use alcohol or thinner to clean the radio as it may cause discoloration, deformation, electric shock, or malfunctions. Use a soft cloth dampened with clean water or soapy water instead.
• Q: What should I do if I notice any abnormality, such as smell or smoke?
  • A: If you notice any abnormality, unplug the power plug immediately and stop using the radio. Contact a professional repair technician or your local dealer for assistance.
• Q: Can I touch the radio with wet hands?
  • A : No, it is prohibited to touch the radio with wet hands as it may cause the risk of electric shock.
• Q: Can I repair the radio myself?
  • A : No, repairs by persons other than professional repair technicians are prohibited. For maintenance matters, please contact your local dealer.

Safety precautions

• Please read this instruction manual carefully before using this product.
• Please pay attention to the warnings and precautions on this product, and be sure to strictly abide by the safety regulations.
• Please keep this instruction manual properly for future inquiries.

Warning

• To avoid fire or electric shock accidents, do not expose this unit to rain or moisture. Before using AC power to power this unit, please check whether the grid voltage is the same as the voltage specified in this manual.
• Be sure to operate the unit correctly in accordance with this instruction manual. Do not open the casing or repair it yourself.

Warning

CAUTION

Main performance indicators

• Power supply : AC 120V/60Hz
• Output impedance: 4Ω
• Output power : 5W
• Frequency response : 80Hz-20kHz
• Frequency :
  • FM 87.5-108MHz
  • AM 520-1710kHz
• BT pairing name : AC-RC87BT
• Product size : 210x118x114mm
• Product weight : 1080g

Simple troubleshooting guide

1. When you are not using it, long press the power key to turn off the machine.
2. When noise or discontinuity occurs, the reasons are as follows:
3. External signal interference stops working.
4. There is no sound for the following reasons:
5. The power is not plugged in or the power switch is not turned on.
6. It may be that the volume potentiometer is not turned on.

Part name

1. Power switch
2. Volume button
3. Clock settings/channels
4. Sleep/automatic channel selection
5. Previous song/hour
6. Display
7. Next song/minute
8. Clock/frequency conversion
9. Pause playback/disconnect BT
10. Manual channel selection
11. Mode key
12. Speaker
13. FM telescopic antenna
14. Battery compartment
15. Power cord

Time setting operation

1. When using this machine for the first time, open the battery cover on the battery compartment at the back of the machine and install 2 AAA batteries. The positive and negative poles are installed according to the symbols in the battery compartment (Figure 1).
   • ( Note: The content will not be displayed after the battery is installed. It is only used for time memory).
2. Please insert the power plug of the machine into the correct AC mains socket. At this time, the display will show “12:00”.
3. 12-hour/24-hour format conversion using (1)12H time format settings

• Step 1: Press and hold the SET/SCAN button for 2 seconds, the display will show “12H” flashing.
• Step 2 : Press the SET/SCAN key again. The display shows “12:00” flashing.
  • (2) 24H time system setting

Step 1 : Press and hold SET/SCAN for 2 seconds, the display will show “12H” flashing.

Step 2 : Click the HOUR key once or click the MIN key once, and the display will show”12H”/”24H”, then you can select the 24-hour format, then click the SET/SCAN button once to complete the setting and return to the clock display.

4. Clock hour setting:

When the time system 12H/24H setting is completed The first method: long press the HOUR key, and the hour digits will change rapidly backwards, select the required hour digits and release to complete the hour setting of the clock.

The second method: continuously click the key, select the required hour number, and complete the hour setting of the clock.

5. Clock minute settings:

The first method: long press the MIN key, and the minute numbers will change rapidly backward. Select the required minute number and release it to complete the minute setting of the clock.

The second method: continuously click the MIN key. Select the required minute number and complete the minute setting of the clock.

CAUTION:

1. The time setting must be operated in the off-mode

2. Time operation cannot be set in radio and BT status.

On/off function operation

1. Power on : Press and hold  the power button for 3 seconds to power on, the display will show the radio or BT status
2. Power off : Long press the POWER button for 3 seconds to shut down, the display only shows time.

BT function operation

1. In the power-on state, short press the MODE button to select BT, the display will show “BT”, and enter the BT state. Adjust the volume to the appropriate position. In the power-on state, shortpress the MODE button to select BT, the display will display “BT”, and enter the BT state. , adjust the volume to the appropriate position.
2. Use a mobile phone or other device that can connect to BT to search for this machine. The name of this machine is “AC-RC87BT”. After selecting pairing, there will be a “beep” sound, and the small word “BT” in the lower-left corner of the display will change from flashing to solid.
3. After pairing, you can play music or audio from your mobile phone or BT device.
4. During playback, press the MIN key once to jump to the next song. Press the HOUR key once to jump to the previous song. Click the key once to temporarily stop playback. Press  again. Press P key to continue playback.
5. Press and hold the  button for 2 seconds to disconnect the BT connection of the mobile phone or BT device. The small “BT” in the lower left corner of the display is flashing. To continue playing, you need to reconnect the unit.

Radio function operation

FM function operation

1. Automatic search and channel selection function

• Step 1 : Press and hold the POWER button for 3 seconds to turn on the computer;
• Step 2: Press the MODE button, select the FM function, and the display will show “FM87.5MHz”;
• Step 3 : Adjust the volume button to the appropriate position;
• Step 4 : Pull out all the telescopic antennas to their maximum length;
• Step 5 : Press and hold the SLEEP/AUTO button for 2 seconds to perform an automatic search and channel selection.
  • Search and automatically store radio stations between 87.5-108MHz, and automatically play the first channel radio station after the search is completed.

2. Semi-automatic radio search button usage

• (1) Press and hold the MIN key for 2 seconds to search for radio stations in the high-end frequency range.
• (2) Press and hold the HOUR key for 2 seconds to search for radio stations in frequency toward the bottom.
• (3) When a radio station is found and played, you can select the radio station by looking at the frequency displayed on the display, or search again for the frequency of the desired radio station.

3. Manual search for radio stations

• (1) Click the    MIN key once to search for radio stations with higher frequencies. Press the  MIN key continuously to select,The frequency of the radio station is required.
• (2) Click the  HOUR key once to search for radio stations with the frequency toward the bottom. Press the HOUR key continuously to select the frequency of the desired radio station.

4. Use the tuner button to manually search for radio stations

• (1) Turn the tuning knob clockwise to search for radio stations with higher frequencies.
• (2) Turn the tuning knob counterclockwise to search for radio stations with a lower frequency range.

AM function operation
1. Automatic search and channel selection function

• Step 1 : Press the MODE button, select the AM function, and the display will show “AM520kHz”;
• Step 2 : Press and hold the SLEEP/AUTO button for 2 seconds to perform the automatic search and station selection function, search and automatically store radio stations from 520-1710kHz, and automatically play the first channel radio station after the search is completed.

2. Semi-automatic radio search button usage

• (1) Press and hold the  MIN key for 2 seconds to search for radio stations in the high-end frequency range.
• (2) Press and hold the  HOUR key for 2 seconds to search for radio stations in frequency toward the bottom.
• (3) When a radio station is found and played, you can select the radio station by looking at the frequency displayed on the display, or search again for the frequency of the desired radio station.

3. Manual search for radio stations

• (1) Click the  MIN key once to search for radio stations in the higher frequency range. Press the  MIN key continuously to select the frequency of the desired radio station.
• (2) Click the  HOUR key once to search for radio stations with the frequency toward the bottom. Press the HOUR key continuously to select the frequency of the desired radio station.

4. Use the tuner button to manually search for radio stations

• (1) Turn the tuning knob clockwise to search for radio stations with higher frequencies.
• (2) Turn the tuning knob counterclockwise to search for radio stations with a lower frequency range.

5. The operation of calling up AM/FM radio stations is as follows:

• Method 1 : Press the SET/SCAN button, and the display will show “P01”. Press the SET/SCAN button continuously to select the radio station stored between “P01” and “P40”.

Method 2:

• (1) Press the SET/SCAN button, and the display will show “P01”, then short press the MIN button to select the station of the channel stored between “P01” to “P40”.
• (2) Press the SET/SCAN button, and the display will show “P01”, then press the HOUR button to select the station of the channel stored between “P40” and “P01”.

6. AM/FM pre-stored radio station settings

Method one:
(1) Press and hold the MIN key for 2 seconds to search for radio stations toward the high end. Press the HOUR key for 2 seconds to search for radio stations toward the bottom. Use multiple operations to select the desired radio station. The display will show the frequency of the radio station.

• (2) After searching for the desired radio frequency, press and hold the SET/SCAN button for 2 seconds. The display will show “P01” flashing. Then click the MIN button to select a channel between “P01” and “P40”.

• (3) After searching for the desired radio frequency, press and hold the SET/SCAN button for 2 seconds. When the display shows “P01” and flashes, click the HOUR button to select a channel between “P40” and “P01”.
• Method Two:
• (1) Turn the tuning button to search for the desired frequency station, and the display will show the frequency of the station

• (2) After searching for the desired radio frequency, press and hold the SET/SCAN button for 2 seconds. The display will show “P01” flashing. Then click the MIN button to select a channel between “P01” and “P40”.

• (3) After searching for the desired radio frequency, press and hold the SET/SCAN button for 2 seconds. When the display shows “P01” and flashes, click the /HOUR button to select a channel between “P40” and “P01”.
• 7. While listening to the radio

• (1) Short press the button to automatically mute the sound and a symbol will appear on the display.
• (2) Short press the  buttonc to cancel mute and continue listening to the radio.

DISPLAY button function operation

In the radio state or BT state, when the display shows the clock, click the DISPLAY button to temporarily view the frequency of the radio state or the BT state display.

In FM mode

In BT mode

Sleep function operation

When you are in radio or BT mode, when you are ready to lie down and take a rest, you can set the playback time in advance, so you don’t have to get up and turn off the phone. Here’s how to do it:

1. Short press the SLEEP/AUTO button to enter the sleep function.
2. Click the SLEEP/AOTO button once, and the sleep time is 10 minutes.
3. Click the SLEEP/AOTO button twice, and the sleep time is 20 minutes.
4. By analogy, click the SLEEP/AOTO button 9 times, and the sleep time is 90 minutes.
5. Press the SLEEP/AUTO button continuously until the display shows “OFF”, the sleep function is canceled.
6. After setting the sleep time, when the time reaches the set time, it will automatically shut down, only display the time status, and no longer play music or audio.

Battery function operation

1. Insert 2 AAA batteries into the battery compartment, do not install the positive and negative poles reversely, and close the battery cover.
2. Plug the power cord into the power socket and use the standard time and radio presets adjusted by the unit Good channel.
3. it has a memory function. After unplugging the power cord or cutting off the power, there will be no display after stopping use. After plugging in the power cord again and turning on the power, the machine will return to the state before it was stopped.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>