V-TAC VT-1186 2 Way Spot Wall Light LED Instruction Manual

V-TAC VT-1186 2 Way Spot Wall Light LED

Product Information

• Product Name: 2 Way Spot Wall Light LED
• Model: VT-1186
• SKU: 10473, 10474, 23049, 23050
• Watts: 3W*2
• Lumens: Not specified
• Input Power: AC: 220-240V, 50/60Hz
• Beam Angle: Not specified
• CRI (Color Rendering Index): 80
• Life Span: 20,000 Hours
• Material: Aluminium+Glass
• Dimension: 105x172x253mm

Product Usage Instructions

1. Turn off the power switch.
2. Remove the front ring of the lamp.
3. Fix the base to the wall with the screws.
4. Connect to the power supply according to the drawing.
5. Connect the front ring to the base.
6. Switch on the power.

Note : The light source can only be replaced by a professional.
This product should not be disposed of with other household wastes. Please refer to the disassembly diagram for more information.

TECHNICAL DATA

• MODEL VT-1186
• SKU 10473, 10474 23049, 23050
• WATTS 3W*2
• LUMENS 310 Lm*2 [@360°Sphere]
• INPUT POWER AC: 220-240V, 50/60Hz
• BEAM ANGLE 90°
• ADJUSTABLE ANGLE 300°
• CRI ≥80
• LIFE SPAN 20,000 Hours
• MATERIAL Aluminium+Glass
• DIMENSION 105x172x253mm

INTRODUCTION & WARRANTY

Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at the best. The warranty is valid for 2 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This product is warranted for manufacturing defects only.

MULTI-LANGUAGE MANUAL QR CODE
Please scan the QR code to access the manual in multiple languages

INSTRUCTIONS FOR THE LIGHT

1. Please make sure to turn off the power before starting the installation.
2. Installation must be performed by a qualified electrician.
3. The light source of this luminaire is not replaceable, when the light source reaches its end of life the whole luminaire should be replaced.
4. Proper grounding should be ensured throughout the installation

This marking indicates that this product should not be disposed of with other household waste
Caution, Risk of electric shock
This product contains a light source of energy efficiency class, where shall be replaced by the energy class of the contained light source.

INSTALLATION DIAGRAM

INSTALLATION INSTRUCTIONS

1. Turn off the power switch.
2. Remove the front ring of the lamp.
3. Fix the base to the wall with the screws.
4. Connect to the power supply according to the drawing.
5. Connect the front ring to the base.
6. Switch on the power

Replaceable (LED only) light source by a professional

DISASSEMBLY DIAGRAM

SYMBOLS

Documents / Resources

| V-TAC VT-1186 2 Way Spot Wall Light LED [pdf] Instruction Manual
VT-1186, 10473, 10474, VT-1186 2 Way Spot Wall Light LED, VT-1186, 2 Way Spot Wall Light LED, Spot Wall Light LED, Wall Light LED, Light LED, LED
---|---

References

• tac.eu

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>