PPI HumiTherm-c Pro Temperature + Humidity PID Controller User Manual
- June 11, 2024
- PPI
Table of Contents
PPI HumiTherm-c Pro Temperature + Humidity PID Controller
This brief manual is primarily meant for quick reference to wiring connections and parameter searching. For more details on operation and application; please log on to www.ppiindia.net.
TEMPERATURE PARAMETERS
RELATIVE HUMIDITY (% RH) PARAMETERS:
OP3 FUNCTION PARAMETERS:
SUPERVISORY PARAMETERS:
UTILITY PARAMETERS:
COMPRESSOR OPERATION & POWER INDICATION:
ELECTRICAL CONNECTIONS
FRONT PANEL LAYOUT
Front Label
Keys Operation
| Symbol | Key | Function |
|---|---|---|
| **** | PAGE | Press to enter or exit set-up mode. |
| **** | DOWN | Press to decrease the parameter value. Pressing once decreases |
the value by one count; keeping pressed speeds up the change.
| UP| Press to increase the parameter value. Pressing once increases the
value by one count; keeping pressed speeds up the change.
| ENTER| Press to store the set parameter value and to scroll to the
next parameter on the PAGE.
PV Error Indications
PV Error Indications For Dry Bulb Temperature (Upper Readout)
| Message | PV Error Type |
|---|---|
| **** | Over-range |
(Dry-Bulb Temp. above Max. Range)
| Under-range
(Dry-Bulb Temp. below Min. Range)
| Open
(Sensor open / broken)
PV Error Indications For Relative Humidity (RH) (Lower Readout)
| Message | PV Error Type |
|---|---|
| **** | Over-range |
(Wet-Bulb Temp. above Max. Range)
| Under-range
(Wet-Bulb Temp. below Min. Range)
| Open
(Sensor open / broken)
| Either Dry Bulb Temp. is below – 20.0°C or above 162.0°C. The error may also
occur i f Wet Bulb depression is more then 60.0°C.
Contact Information
101, Diamond Industrial Estate, Navghar, Vasai Road (E), Dist. Palghar – 401
210.
Sales: 8208199048 / 8208141446
Support: 07498799226 / 08767395333
E: sales@ppiindia.net,
support@ppiindia.net.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>