MEAN WELL NDR-480 480W Single Output Industrial DIN RAIL Instruction Manual
- June 4, 2024
- MEAN WELL
Table of Contents
480W Single Output Industrial DIN
RAIL N D R = 4 0 series
Features
- Universal AC input / Full range
- Built-in active PFC function
- Protections: Short circuit / Overload / Over voltage / Over temperature
- Cooling by free air convection
- Can be installed on DIN rail TS-35/7.5 or 15
- UL 508 (industrial control equipment) approved
- BS EN/EN61000-6-2(BS EN/EN50082-2) industrial immunity level
- 100% full load burn-in test
- 3 years warranty
Description
NDR-480 is one economical slim 480W Din rail power supply series, adapt to be installed on TS-35/7.5 or TS-35/15 mounting rails. The body is designed 85.5mm in width, which allows space saving inside the cabinets. The entire series adopts the full range AC input from 90VAC to 264VAC and conforms to BS EN/EN61000-3-2, the norm the European Union regulates for harmonic current. NDR-480 is designed with metal housing that enhances the unit’s power dissipation. With working efficiency up to 92.5%, the entire series can operate at the ambient temperature between -20°C and 70°C under air convection. It is equipped with a constant current mode for overload protection, fitting various inductive or capacitive applications. The complete protection functions and relevant certificates for industrial control apparatus (UL508, TUV BS EN/EN62368-1, and etc.) make NDR-480 a very competitive power supply solution for industrial applications.
Model Encoding
Applications
- Industrial control system
- Factory automation
- Electro-mechanical apparatus
GTIN CODE
MW Search:
https://www.meanwell.com’serviceGTIN.aspx
SPECIFICATION
| MODEL | NDR-480-24 | NDR-480-48 |
|---|---|---|
| OUTPUT | DC VOLTAGE | 24V |
| RATED CURRENT | 20A | 10A |
| CURRENT RANGE | 0 – 20A | 0-10A |
| RATED POWER | 460W | 480W |
| RPPLE & NOISE (max.) Nona | 15OrnVp-p | 150mVp-p |
| VOLTAGE ADJ. RANGE | 24 – 28V | 48 -55V |
| VOLTAGE TOLERANCE Nob3 | ±10% | ±1.0% |
| LINE REGULATION | ±05% | ±0.5% |
| LOAD REGULATION | ± 1 .0% | ±1.0% |
| SETUP, RISE TIME | 1503ms. 100ms/230VAC 3000ms. 100 ms/I I5VAC at WI bad | |
| HOLD UP TIME (Typ.) | 16(110230VAC 16ms1115VAC at ful load | |
| INPUT | VOLTAGE RANGE Nome | 90- 264VAC 127 – 370VDC |
| FREQUENCY RANGE | 47- 63Hz | |
| POWER FACTOR (Typ.) | PF>0.981115VAC, PF>0.94/230VAC at full load | |
| EFFICIENCY (Tye.) | 93.% | 92.5% |
| AC CURRENT (Typ.) | 4 BA/115VAC 2.4A/230VAC | |
| INRUSH CURRENT (Typ.) | 20A/115VAC 354.1230VAC | |
| LEAKAGE CURRENT | <2mA/ 240VAC | |
| PROTECTION | OVERLOAD | 105 -130% rated output power |
Protectontype :Constant current limiting, unit wit shut down alter 3 sec., re-
power on to recover
OVER VOLTAGE| 29-33V /56 – 65V
Protection type: Shut down Cpvollage. re-poKer cc to recover
OVER TEMPERATURE| Shut dOw Op vol (age. recovers au bma tic alter tempera b
re goes down
BOMONIAMT| WORKING TEMP.| -20 -+70t (Refer b ‘Deming Camel
WORKING HUMIDITY| 20- 95% RH non-condensing
STORAGE TEMP., HUMIDITY| -40 -+85t , 10- 95% RH
TEMP. COEFFICIENT| toonrc (0-50t )
VIBRATION| Corrponentl 0 – 500Hz, 2G l Ornit Mayo’s, 60mb. each along X, Y, Z
axes; Mountbg: Compiance to EC60368.2.6
SAFETY & EMC
(Note 4)| SAFETY STANDARDS| 11508, TUV BS EN/EN62368-1, EAC TPTC 004. BSA I
CNS14336-1 approved;(meel BS EN/EN60204-1)
WITHSTAND VOLTAGE| VP-0/P:3KVAC I!P-FG:2KVAC OP-FG:0.5KVAC
ISOLATION RESISTANCE| 1/P-0/P, IP-FG ,O/P-FG:>100M Ohms I 500VDC 125C170% RH
EMC EMISSION| Comp lance b BS EN/EN55032 (CISPR32)13$ EN/EN61204-3Class B,BS
ENE h€1000-3-2,-3,EAC TP TC 020.CNS13438 Class B
EMC IMMUNITY| Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11,IIS SUEN55024,13S
EN/EN6100043-2 (BS ENEN50002-2),BS EWEN61204-3, heavy industry level, EAC TP
TC 020
OTHERS| NYSE| 10416K Ms min. Telmmia SR-332 (13elcore) ; 146 AK hrs inn. MIL-
HDBK-217F (25T)
DIMENSION| 85.5’1252128.5mm (WWI))
PACKING| 1.5Kg; 8 pos/13Kg/0.9CUF T
NOTE| 1.N parameters NOT miecially mentioned we measured at 230VAC input rated
load and at of ambient temperature.
2 .Ftpple & noise are measured at 20MHz of bandwidth by using a 12- twisted
pair-wire terminated with a O. tut & 47u1 parallel capacitor.
3 .Tolerance : inudas set up tolerance, line regulation and load regulation.
4 .Instillation dominoes : 40mm on bp, 20mm on the bottom, 5mm on the left and
right Ode are recommended when loaded permanently with kill power. In case the
adjacent device is a heat source. 15rnm clearance is recommended.
5 .Derating may be needed under by input voltage. Please check the Stating awe
brfor more details.
6 .The paver supply is considered as an independent unit, but the final
equipment sill need to reconfirm that the whole system complies with be EMC
directives. Fagidave on hO’Niopeumthese EIIC lest. phase refer WWI testing of
comps en pow copes.’ 7 .The ambient temperature derming a 3.5’C/1000m with
tantass models and of 5’C/1000m with tan models for operating altitude higher
than 2000m(6500ft). lassvelte:http://www.meanwell.com) > Product Liability
Disclaimer : For detailed information. please refer
https://www.meanwell.comfserviceDiscldmer.aspx
Block Diagram
Derating Curve
Output derating VS input voltage
mechanical Specification
Installation Instruction
This series fits DIN rail TS35/7.5 or TS35/15.
For installation details, please refer to the Instruction manual.
Installation Manual
Please refer to : http://www.meanwell.com/manual.html
https://www.meanwell.com/Upload/PDF/NDR%20DIN%20rail.pdf
File Name: NDR-480-SPEC 2022-02-28
Documents / Resources
| MEAN
WELL NDR-480 480W Single Output Industrial DIN
RAIL
[pdf] Instruction Manual
NDR-480, 480W Single Output Industrial DIN RAIL, Single Output Industrial DIN
RAIL, Output Industrial DIN RAIL, Industrial DIN RAIL, DIN RAIL
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>