Airzone RSDR Horizontal Single Deflection Return Grille Installation Guide
- June 9, 2024
- AIRZONE
Table of Contents
Airzone RSDR Horizontal Single Deflection Return Grille Installation Guide
HORIZONTAL SINGLE DEFLECTION RETURN GRILLE
RSDR diffusion grille made from extruded aluminum with a standard frame measuring 26 mm and mobile horizontal slats that can be individually adjusted, adapting the range and air stream to the required needs. The available regulation types are:
- All-nothing: The damper occupies 100% of the grille
- Minimum air: The damper occupies 80% of the grille
- 2×1: The damper occupies 50% of the grille
DIMENSIONS
The dimensions may vary depending on the type of fixing or regulation
INSTALLATION
K: Insert the grille into the opening until it clips into place.
T: Fit the grille into the opening and screw it tightly into place.
P: Fit the grille in the opening
Locate the screws that adjust the latches and screw them in the correct position until the grille is fixed in place.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>