AIRZONE CPRR Motorized Rectangular Grille Damper Instructions
- June 9, 2024
- AIRZONE
Table of Contents
AIRZONE CPRR Motorized Rectangular Grille Damper
Product Information
The CPRR is a motorized rectangular grille damper that controls the airflow to the zone it serves by regulating the opening and closing of its row of motorized slats. It is compatible with various Airzone grilles, including RSDR, RSDV, RLC1/RLC2, RL00, RL0V, RLQV, RLQ1/RLQ2, and RDHV. The damper is available in different sizes ranging from 75 mm to 400 mm in height and 200 mm to 700 mm in length.
Product Usage Instructions
- Choose a compatible Airzone grille for the CPRR damper installation. Make sure the grille is compatible with the size of the damper.
- Insert the CPRR damper into the chosen grille.
- Connect the damper to the Airzone system to control its motorized slats.
- The CPRR damper regulates the airflow to the zone it serves based on its thermal demand. The motorized slats open and close to maintain the desired temperature in the zone.
- For larger damper sizes (>700 mm), combinations of dampers will be supplied.
- Follow the manufacturer’s instructions for the maintenance and cleaning of the CPRR damper and the compatible Airzone grille.
MOTORIZED RECTANGULAR GRILLE DAMPER
This Airzone motorized element, when inserted in any of the Airzone grilles listed below, controls the airflow to the zone it serves, by regulating the opening and closing of its row of motorized slats, depending on the thermal demand of the zone to be heated or cooled.
Compatible grilles:
RSDR, RSDV, RLC1/RLC2, RL00, RL0V, RLQV, RLQ1/RLQ2 and RDHV.
Dimension
CPRR [XXX] [XXX] MTE
EJ. CPRR [010020] MTE
CPRR 100 x 200 mm motorized damper
- For larger sizes (>700 mm), combinations of dampers will be supplied.
COMPATIBLE ACCESSORIES
TECHNICAL DATA
- Supply voltage ± 12 V
- Rated current 40 mA
- Maximum current 250 mA
- Output torque 0.8 Nm
- The start and end of a stroke are Controlled by
- Airzone electronics
- Mechanical connection Connecting rod
- Fixing TORXT10
- Protection class Class III
INSTALLATION
- Close the damper manually. Engage the motor, checking that the damper is properly closed.
- Screw the motor to the mounting plate.
- Connect the motor to the power supply, respecting the polarity. Check the opening and closing by generating demand on the zone’s thermostat.