GREENCUT EBV3000C Electric Vacuum Blower

Contents of the Box

• 1 Wheel

• 2 Suction-blower tube

• 3 Suction-blower body

• 4 Auxiliary handle

• 5 Hook hole for strap

• 21 ST4x14 (3)

• 21 ST4x50 (1)

Components

1. Wheel
2. Suction-blower tube
3. Suction-blower body
4. Auxiliary handle
5. Hook hole for strap
6. Speed regulator
7. Blower trigger switch
8. Suction trigger switch
9. Dust bag zipper
10. Dust bag

Product Usage Instructions

1. Connect the dust bag (#10) to the suction-blower body (#3).
2. Attach the wheel (#1) to the suction-blower body (#3).
3. Select either blower or suction mode by sliding the control lever (6) to the desired position.
4. In blower mode, hold down the blower trigger switch (7) to operate.
5. In suction mode, hold down the suction trigger switch (8) to operate.
6. Adjust the speed of the airflow by turning the speed regulator (6).
7. When the dust bag is full, unzip the zipper (9) and empty it.

HELLO!

• Thank you for choosing this GREENCUT product. We are sure that you will appreciate its quality and that it will meet your needs for a long period of time.
• Remember that you can contact our Official Technical Service for questions about assembly, use, maintenance, identification and troubleshooting and for the purchase of spare parts and/or accessories.
• Attention: Read this manual carefully before using the product. Failure to observe the operating instructions and safety warnings may result in damage to the user and/or the product itself. The manufacturer is not liable for accidents and damage caused to the user, third parties and objects as a result of disregarding the contents of this manual.
• This product is not intended for professional use. Keep this instruction manual for future reference. If you sell this product, remember to give this manual to the new owner.

PRECAUTIONS FOR USE

The following symbols and signal words are intended to explain the risks and information related to this product. All information contained in this manual is relevant to your own safety and that of your environment. If you are in any doubt about the information contained in this manual, please consult a professional or contact an Authorised Service Centre. The following information on hazards and precautions includes the most likely situations that may arise during the use of this machine. Refer to all product literature, packaging and labels before use.

• Always disconnect the machine from the mains before cleaning, inspecting, repairing or when the machine is damaged or entangled.
• Disconnect the mains plug immediately if the cable is damaged or cut.
• Keep hands away from the rotating fan.
• Waste electrical products must not be disposed of with household waste. Please recycle where facilities exist. Consult your local authority or pensioner for advice on recycling.
• Persons who are not adequately protected should be kept at a safe distance.
• Keep children away from this machine.
• Before servicing or repairing the machine, switch it off and remove the battery.
• Guaranteed sound power level XX Lwa, dB(A).

PRODUCT DESCRIPTION

Technical characteristics

Contents of the box

Components

1. Wheel
2. Suction-blower tube
3. Suction-blower body
4. Auxiliary handle
5. Hole for strap hook
6. Shoulder strap
7. Speed regulator
8. Trigger switch
9. Suction/blower selector lever
10. Collection bag

ASSEMBLY

STEP BY STEP

1. Remove the suction/blower tubes, the body, the wheel with the bracket.
   Attach tube #2 to the machine body, using two ST4x14 screws. As shown in the attached picture.

2. Place part #4 on the end of part #3 and use an ST4x14 screw to secure it.

3. Join body + tube #2 to tube #3 and tighten with ST4x50 screw.

4. Set the machine to the option, depending on the job you want to do: blower or hoover. Use the icons on the machine to find out which action you have selected.

5. Insert the collection bag #5, into the body of the machine, noting the area designed for insertion.
   Your EBV3000C is now ready!

USE OF THE PRODUCT

IMPLEMENTATION

• Before starting the vacuum blower, make sure that the two intermediate suction/blowing pipes together with the machine body are correctly mounted.

• Do not attempt to pick up wet debris, or allow fallen leaves etc. to dry before using the vacuum blower. The vacuum blower can be used to blow debris from yards, driveways, paths, lawns, shrubs and bushes, etc., before using the vacuum blower. paths, lawns, shrubs and borders. It will also pick up leaves, paper, small twigs and wood chips.

• When using the vacuum blower in suction mode, waste is sucked through the suction tube before being ejected into the waste collection bag, as the waste passes through the suction fan it is partially shredded. The shredded organic shredded organic waste is ideal for use as mulch around plants.

  • Warning! Any hard objects, such as stones, glass cans, etc., will damage the vacuum blower.
  • Important: Do not use the V do not use the vacuum blower to suck up water or very wet debris.

• Never use the vacuum blower without the debris collection bag fitted.
  WARNING: IF THE CABLE IS DAMAGED, HAVE IT REPLACED BEFORE USING THE BLOWER.

• Inspect the area to be worked on before starting. Remove any objects or debris that may be thrown, jammed or entangled in the vacuum blower. Select the blowing function using the selector lever on the side of the machine. With the vacuum blower resting on its wheels, move the vacuum blower forward directing the nozzle towards the debris to be cleaned.

• Alternatively, hold the nozzle just above the ground and turn the machine from side to side. Blow the debris into a convenient pile and then use the vacuum function to collect the debris.

• Remove any objects or debris that may be thrown, caught or entangled in the vacuum blower. Select the vacuum function using the selection lever on the side of the machine and turn it on. With the vacuum blower resting on its wheels, move the vacuum blower forward directing the nozzle towards the debris to be picked up. Alternatively, with the vacuum blower held just above the ground, swing the machine from side to side, moving forward and directing the nozzle towards the waste to be collected. Do not force the nozzle towards the waste, as this will block the suction tube and reduce the efficiency of the machine.

• Organic materials, such as leaves, contain a large amount of water which can cause them to stick to the inside of the suction tube. To reduce sticking, the material should be left for a few days to dry.
  ATTENTION: WHEN UNLOADING SHREDDED LEAVES, DISCONNECT THE MAINS PLUG FROM THE MAINS AND TURN THE SWITCH TO THE OFF POSITION.

MAINTENANCE

• Always disconnect the machine from the mains before cleaning, inspecting, repairing or when the machine is damaged or entangled.
• Clean the dust bag regularly.
• Inspect the machine regularly for damage and wear.
• Replace any damaged or worn parts immediately.
• Attention! Before carrying out any inspection or maintenance work, disconnect the mains plug from the mains socket. Regularly check your machine before starting work. Make sure that all nuts, bolts and screws are properly tightened and that guards are securely mounted. All damaged and worn parts must be replaced to keep the vacuum blower in safe working condition.
• Never leave material in the hoover or waste collection bag. This could be dangerous when starting the vacuum blower. After using the vacuum blower the vacuum blower must be thoroughly cleaned. Make sure that the vacuum blower is switched off and disconnected from the mains. Remove and empty the waste collection bag.
• Ensure that the vacuum/blow selection lever that the vacuum/blow selection lever operates smoothly and is not obstructed by dirt around the blower and inside the suction/blow tube. Always keep the ventilation slots in the motor housing clean.
• Never clean or spray the machine with water. Clean the motor housing only with a damp cloth and never use detergents or solvents.
• These could ruin the plastic parts of the machine’s plastic. Finally, dry the motor housing carefully.
• Store the appliance in a dry place out of the reach of children. If the power cord needs to be replaced, this should be done by the manufacturer or his agent to avoid a safety risk.
  WARNING: TO AVOID ELECTRIC SHOCK, FIRE OR INJURY, USE ONLY PARTS IDENTICAL TO THOSE IN THE PARTS LIST. INSULATED, TO AVOID ELECTRIC SHOCK, FIRE OR INJURY, USE ONLY PARTS IDENTICAL TO THOSE IN THE PARTS LIST. THE PARTS LIST IS NOT INCLUDED IN THE PARTS LIST. TO AVOID ELECTRIC SHOCK, USE ONLY PARTS IDENTICAL TO THOSE LISTED IN THE PARTS LIST.

DECLARATION OF CONFORMITY

• We, BESELF BRAND S.L., owner of the GREENCUT brand, with registered office at c/Blanquers, 7-8 43800 – Valls, SPAIN, declare that the treadmill MC-500, from serial number 2017 onwards, is in conformity with the requirements of the applicable European Parliament and Council Directives:
• Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility (recast).
• The delivered product corresponds to the EC type-examination specimen.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>