lionelo Otto Baby Swing User Manual

User manual Otto
Baby swing

Eight Baby Swings

Dear customer!
Should you have any remarks or questions concerning the product, please do not hesitate to contact us: help@lionelo.com
Before you use the baby swing for the first time, please read this manual carefully. A wrong use of the product may pose a threat to your child.
Note! Only an adult is allowed to assemble the product.
IMPORTANT! READ CAREFULLY AND KEEP FOR FUTURE REFERENCE.
Producer:
BrandLine Group Sp. z o. o.
ul. A. Kręglewskiego 1, 61-248 Poznań, Poland

Warning

• The product is intended for new-born babies and older children.
• Never leave the child unattended.
• Do not use this product once your child can sit up unaided or weights more than 9 kg
• This product is not indended for prolonged periods of sleeping.
• Never use this product on an elevated surface (e.g. a table).
• Always use the restraint system.
• To avoid injury ensure that children are kept away when unfolding and folding this product.
• Do not let children play with this product.
• Do not move or lift product with the baby inside it.
• The product cannot substitute the baby’s cot or bed. If your child needs to sleep, place it in a suitable bed.
• Do not use the product if any element is missing or damaged.
• Do not use accessories or spare parts other than recommended by the manufacturer.
• Keep this manual for future reference.

Warnings related to batteries and feeder cable

• Keep batteries out of reach of children.
• Insert batteries in the compartment in accordance with marking.
• Do not throw batteries into fire as they may explode.
• If you do not use the product for a long time, please remove a battery from the compartment.
• Always remove a worn-out battery, otherwise it may leak or explode and damage the product.
• Do not charge single-use batteries.
• Do not mix batteries – old with new ones, or alkaline with standard or multiplecharge batteries.
• Dispose of batteries in accordance with regulations, throw them into special containers.
• Check the feeder cable for potential damage to the cable, plug, contacts and other elements. If you detect any irregularities, do not use the feeder cable anymore.
• When using the product, use the feeder cable of suitable parameters and recommended by the manufacturer (supplied).
• To make sure the product works, you need 4 LR14 batteries (not supplied) or feeder cable (not supplied). The feeder cable parameters required: input: 100-240V ~ 50/60Hz 0.3A, output: 5V 1000mA

Description (fig. 1)

1. Product frames
2. Seat fabric covering
3. Bow
4. Cushion
5. Seat frames
6. Cushion fastening
7. USB cable

How to assemble

1. Unfold the legs of the baby swing so that they are stable on the flat surface.
2. Put the sound module on the frame of the baby swing, as showed in the figure no. 2. The assembly is successful if you can hear a „click”.
3. Lift frames of the seat (5) and then put the fabric covering on it (fig. 3). Fasten the Velcro at the bottom of the covering.

How to replace a battery

1. Use a screwdriver to loosen the bolt which secures the battery compartment (fig. 4).
2. Remove the battery cover and insert four LR14 batteries in the compartment. Pay special attention to battery poles (see: fig. 5). It is advisable to use alkaline batteries.
3. Put the battery cover on and tighten up with a screwdriver. Do not tighten up too firmly (fig. 6).

Feeder cable
To use the mains power supply, connect a USB cable to the sound module of the baby swing (port marked as e in fig. 13). Insert the second tip in the relevant mains power adapter (not supplied).
Note! The feeder cable should have the following parameters:
input: 100-240V ~ 50/60Hz 0.3A, output: 5V 1000mA.
How to use the product
Cushion – the product is equipped with a high-quality cushion which can be attached to the covering with a Velcro (6) located underneath the cushion. To do so, pull the cushion Velcro through a fastening which stands out from the seat (fig. 7) and fasten it.
5 – point safety belts – when the child is in the baby swing, safety belts must always be fastened.
A. To fasten the belts:

1. Put the child into the baby swing. Make sure your child’s legs go through the protective fabric cushion, as presented in fig. 11.
2. Insert the tip of shoulder belts (A in fig. 8) in hip belts (B in fig. 8). Pull child’s hands through them.
3. When the belts are connected, insert them in the buckle (C in fig. 8). If you can hear a „click”, it means the assembly has been successful.
4. After you have fastened the belts, put the protection on the buckle (fig. 9).

B. To undo the belts: press the key on the buckle and pull the belts out (fig. 10).
C. How to adjust the belts Adjust the belts to your child’s body with the use of adjustment. The belts must fit tight your child’s body but must not cause discomfort. The belts must not be twisted.
You can also change the height of shoulder belts. To do so, undo the belts and take them out through holes in the seat covering (marked in fig. 12). Next pull the belts through another hole and secure them on the other side of the covering.
Control module See: fig. 13.
a. speed control knob
b. play music/change volume
c. add rocking time
d. shorten rocking time
e. charging port
Speed control knob – lets you make the chair move constantly and soothingly.
You can choose five speed levels, as marked in the knob. To switch it off, turn the knob in the initial position, marked as „O”. The product will stop rocking yet the music will not be stopped.
Play music/change volume – press this key to play music. At first the volume is minimum. Press the key again to volume up. To stop playing music, press this key three times.
Add/shorten rocking time – this option lets you schedule product shutdown.
You can choose the following time settings: 15, 30, 45 minutes. If you do not use any time (none of three LEDs glows), the device will switch off automatically after 60 minutes.
If the product does not work properly (e.g. rocking power is too low, distorted music, dim light signs), it may mean the battery must be replaced.
How to store and transport the product
To fold the product (fig. 14):

1. Lift both frames of the seat.
2. Disconnect the control module from the baby swing. frame and then lift it.
3. Connect the legs of the product.
4. Secure the product with an assembly belt located at the reverse of the covering (see: fig. 15)

Troubleshooting

solutions will cause the product to resume working, only the following will change: work time and rocking speed.
Rocking does not start| Batteries have been inserted in a wrong way.
Damage to the feeder cable.
Feeder cable has been connected in a wrong way.
No power supply in the socket.| Insert the batteries again. Pay special attention to marking (poles). Check the feeder cable and wire for proper connection.
Check if the feeder cable has been plugged in the socket properly.|
The angle of rocking is lower than desired.| The baby swing needs about 20-45 seconds to rock properly.| | At low voltage and high load, the baby swing may need up to 50 seconds to start rocking properly.
Distorted music.| Flat batteries.| Replace the batteries.|
Music stops playing suddenly.| Set time has passed.| Press the music play key again.| The rocking time and music playing time settings do not correlate. You can adjust the settings so that the music stops playing when the product keeps on rocking the child or the other way round.
Such operation is intentional and is to give the user more freedom in changing settings.

How to clean and maintain
The cushion, seat covering – wash manually at the temperature of max. 40°C.
The bow and frames – wash with a wet and soft cloth with a soft detergent. Wipe it dry afterwards.
The pictures are for reference only. The real design of the products may differ from the pictures presented.
Simplified EU / EC declaration of conformity
BrandLine Group Sp. z o. o. hereby declares that the “OTTO” product complies with the directive: 2014/30/EU – EMC Directive, 2011/65/EU –
RoHS Directive, 2009/48/EC – Toy Directive (Toy set only).
Full content of EU declaration of conformity is available on the following website:
https://lionelo.com/deklaracja_zgodnosci/OTTO.pdf

The product complies with requirements of EU directives.
Pursuant to the Directive 2012/19/EU, this product is subject to selective collection.
The product must not be disposed of along with domestic waste as it may pose a threat to the environment and human health. The worn-out product must be handed over to
the electrics and electronics recycling center.
Detailed warranty conditions are available on the website: www.lionelo.com
Thank you for purchasing our product

youtube.com/lionelo www.lionelo.com

Documents / Resources

| lionelo Otto Baby Swing [pdf] User Manual
Otto, Otto Baby Swing, Baby Swing, Swing
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>