EPOMAKER TH80 SE Wired Mechanical Gaming Keyboard User Manual
- June 9, 2024
- EPOMAKER
Table of Contents
EPOMAKER TH80 SE Wired Mechanical Gaming Keyboard
WINDOWS SHORTCUTS
- FN + F1 Screen Brightness –
- FN + F2 Screen Brightness +
- FN + F3 Task
- FN + F4 Explorer
- FN + F5 Mail
- FN + F6 My Computer
- FN + F7 Previous Track
- FN + F8 Play/Pause
- FN + F9 Next Track
- FN + F10 Mute
- FN + F11 Volume –
- FN + F12 Volume +
- FN + U PrtSc
- FN + I Scroll Lock
- FN + O Pause
- FN + DEL Insert
- FN + PG DN End
- FN + WIN Lock/Unlock Win Key
LIGHT EFFECTS
- FN + BACKSPACE Turn On/Off Backlights
- FN + | Toggle RGB Effects
- FN + ENTER Toggle RGB Colors
- FN + ↓ Backlights Brightness –
- FN + ↑ Backlights Brightness +
- FN + ← Backlights Speed –
- FN + → Backlights Speed +
MACOS SHORTCUTS
- F1 Screen Brightness –
- F2 Screen Brightness +
- F3 Task
- F4 Search
- F5 Mic
- F6 Sleep
- F7 Previous Track
- F8 Play/Pause
- F9 Next Track
- F10 Mute
- F11 Volume –
- F12 Volume +
FUNCTION KEY COMBINATIONS
- FN+ESC (HOLD 3S) Reset the Keyboard
- FN + 1 Short Press to Switch to BT1; Long Press to Pair Devices
- FN + 2 Short Press to Switch to BT2; Long Press to Pair Devices
- FN + 3 Short Press to Switch to BT3; Long Press to Pair Devices
- FN + 4 Short Press to Switch to 2.4G Mode; Long Press to Pair Devices
- FN + 5 Wired Mode
- FN + B Battery Check
- FN + Z/X/C Switch among the Layers 1/2/3
- FN+HOME Toggle Badge Color
- FN+PG UP Toggle Badge Light Effect
- FN+SPACEBAR (HOLD) Check Layer & Mode
PAIRING BLUETOOTH
Toggle the switch in the back to make sure that the keyboard is under the wireless mode:
- Hold Fn+1/2/3 for 3-5 seconds till the indicators flashes fast in blue, the keyboard is ready to pair.
- Turn on your Bluetooth device and find “TH80 SE BT5.0” or “TH80 SE BT3.0”, then connect. When the keyboard is connected to the Bluetooth device, the light on the 1/2/3 key stops flashing and the connection is done.
- Press Fn+1/2/3 to toggle between the Bluetooth devices 1/2/3.
PAIRING WIRELESS 2.4GHZ
- Toggle the switch in the back to make sure that the keyboard is under the 2.4G wireless mode:
- Insert the 2.4G dongle to your device, the 4 key stops light up in green for 2s and the connection is done.
WIRED MODE
Toggle the switch in the back to make sure that the keyboard is under the
wired mode till the 5 key lights up in white, and the keyboard enters to the
wired mode successfully.
CHECK BATTERY
Hold Fn+B, the keys from 1! to 0) lights up to show the battery percentage;
for example, if the keys from 1! to 6^ light up when holding Fn+B, it means
that the battery life is currently 60%; if keys of 1!-0) light up, battery
life is 100%.
CHECK LAYER AND MODE
Hold Fn+Spacebar, the indicators of Z/X/C and 1/2/3/4/5 light up to show at
which layer and which mode the keyboard is; for example, if the keys of X and
3 light up when holding Fn+Spacebar, it means that the keyboard is in layer 2
and under the wireless mode and connected to BT3 device.
SPECS
- MODEL: EPOMAKER TH80 SE
- KEYS AMOUNT: 81 Keys + 1 knob
- STRUCTURE: Gasket-like mount
- STABILIZER TYPE: Plate-mounted
- PCB TYPE: 3/5-pin Hotswap PCB
- BATTERY CAPACITY: 4000mAh
- CONNECTIVITY: Type-C Wired, 2.4 & Bluetooth Wireless
- ANTI-GHOST KEY: NKRO in all modes
- POLLING RATE: 1000hz in Type-C Wired & 2.4G modes
- COMPATIBILITY: WINDOWS/MAC
- DIMENSION: 325 x 135 x 30 mm
- WEIGHT: Around 0.9kg
REPLACING KEY CAPS AND SWITCHES
For a full guide on how to remove keycaps and switches scan the QR Code or type in your browser: https://epomaker.com/blogs/guides/diy-guide-how-to- remove-and-replace-your-mechanical-keyboard-switches
Mechanical Switch
Example of a switch as seen from top after you remove the keycap to prepare
for switch removal.
Remove Switches
- Grab your Switch Removal Tool and align the gripping teeth vertically (on the Y-Axis) at the center of the switch, as shown in the example graphic above.
- Grab the switch with the Switch Puller and apply pressure until the switch releases itself from the plate.
- Using firm but gentle force pull the switch away from the keyboard using a vertical motion.
Install Switches
- Check that all the switch metallic pins are perfectly straight and clean.
- Align the switch vertically to have the Gateron logo facing north. The pins should align themselves to the keyboard PBC.
- Press the switch down until you hear a click. This means your switch clips have attached themselves to the keyboard plate.
- Inspect the switch to ensure it’s properly attached to your keyboard, and test it.
Note: If the key doesn’t work its possible you may have bent one of the
switches while installing it. Pull the switch out and repeat the process.
Pins may be damaged beyond repair and need replacement if this process is not
done correctly. Never apply excessive force when replacing keycaps or
switches. If you cannot remove or install keycaps or switches please contact
customer service as soon as possible to avoid damage to the keyboard due to
operating errors.
TECHNICAL ASSISTANCE
For technical assistance, please email to support@epomaker.com with your purchase order number and a detailed description of your issue. We normally respond to enquiries within 24 hours. If you purchased your keyboard from a distributor or not from any official store of Epomaker, please contact them directly for any additional help.
COMMUNITY FORUMS
Join our community and learn together with other keyboard enthusiasts.
WARRANTY
EPOMAKER’s Warranty covers any factory defects that might affect the proper
functionality of your purchase. It doesn’t cover any damage that may occur
from normal wear and tear. If your product is defective we will send you a
replacement unit. Replacement units might require you to send the defective
unit back to Epomaker.
We provide a 1 year warranty for our products when bought from our website
(EPOMAKER.com). Your item will not be covered by your 1 year warranty if the
inspection shows any sign of modification or changes unsupported by the
original product, these include: Changing internal components, Assembling and
reassembling the product, Replacing Batteries, etc.
We will ONLY cover the item if it is bought from our official stores. You do
not have a warranty with us if you bought the item from another reseller or
likewise. Please contact the store that you bought your product from to
resolve issues.
Made in China
Manufacturer: Shenzhen Changyun Technology Co., Ltd. Address: Seventh
Floor, Kai Daer Building, No.168 Tongsha Road, Xili Street, Nanshan Disctrict,
Shenzhen,Guangdong, CN
Email: support@epomaker.com
Web: www.epomaker.com
References
- Epomaker
- Epomaker
- DIY Guide: How to Replace Your Mechanical Keyboard Switches
- Reddit - Dive into anything