SDC LRFR1R Falcon Retrofit Monitoring Kit Instruction Manual
- June 4, 2024
- SDC
Table of Contents
**SDC LRFR1R Falcon Retrofit Monitoring Kit Instruction Manual
**
INSTALLATION INSTRUCTIONS
- Remove the following components: The Device End cap and Mounting Bracket, Cover plate and the Push bar End cap.
- Insert the switch assembly into the top slot of the Push bar until it stops against the Push bar Hinge.
- Route the wires out and re-assemble the device.
WIRING SPECIFICATION
- WHT – COM
- YEL –N/O
- ORG –N/C5
- 5 AMP @ 125 VAC RESISTIVE
Any suggestions or comments to this instruction or product are welcome. Please
contact us through our website or
Email: engineer@sdcsecurity.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>