Dongguan Genai Technology BLUEPODS3 Wireless Headphone User Manual
- June 6, 2024
- Dongguan Genai Technology
Table of Contents
Dongguan Genai Technology BLUEPODS3 Wireless Headphone
Overview
Product parameters
- Wireless version: V5.l
- Working range: barrier-free 10 meters
- frequency response:S0Hz~20KHz
- Charge and discharge cycle: ;;.3oo;x
- Charging box capacity:250mAh
- Charging time: 2.5 hours
- Talk time: about 4 hours (80% volume)
- Play music: about 3.5 hours (80%volume)
- Headphone built-in battery: lithium battery-3.7V, 25mAh
- Standby time: about 50 hours for headphones, about 240 hours for standby with charging case
Key function operation
- Power on: open the charging box, the headset will automatically turn on
- Shut down: put the earphone into the charging box and close the cover
- Pairing mode: the headset automatically enters the pairing mode when turned on
- Pause/play: click left or right ear
- Answer: click left ear or right ear
- Hang up: Double-click the left/right earphone once ,Incoming call rejection: long press left ear or right ear for 2 seconds
- Previous song: Three-click L-side headphones ,Next song: Three-click R-side headphones
- Volume up: double-click and press the right earphone
- Volume down: double-click and press the left earphone
- SIRI (voice assistant): long touch left/right earphone 2S
Product function\features
- Wireless stereo: support connecting Bluetooth devices to play music
- Wireless call: supports Wireless connection for high-definition calls
- Power indicator: support iOS system headset power indicator
Charging box LED indicator light
- Charging box open/close cover indicator: open/close cover lights up in green
- Headphone insert/remove charging box indicator light: corresponding to the green light flashing once, (the left headphone corresponds to the first LED light, and the right headphone corresponds to the fourth LED light)
- The charging box charges the earphones. The indicator light: Put the earphones into the charging box and close the cover to start charging the earphones. The LED lights corresponding to the earphones flash once every 5S during charging (the left earphone corresponds to the first LED light, and the right earphone corresponds to the fourth LED light) , The headset no longer flickers when it is fully charged
- Charging indicator light for the charging box: plug in the charging cable to charge the charging box. The last LED light flashes corresponding to the power level, and the 4 LED lights are always on when fully charged
- low battery reminder of the charging box: the first LED flashes when the battery is low
Wireless connection operation
- Please keep the Wireless headset and mobile phone (or other connected device) within 1 meter, the closer the better.
- Turn on the charging box, the headset will automatically turn on and enter the pairing mode.
- Turn on the user’s mobile phone (or other Wireless device), Wireless function, and search or scan. At this time, the mobile phone will search for all nearby Wireless devices, click the connection corresponding Wireless model name, after successfully pairing and connecting, you can start the headset call, Listen to songs and so on.
Warnings and precautions when using the product
- Never use abrasive cleaners to clean this product.
- Do not allow this product to heat up or close to fire sources, such as cooking stoves.
- Do not expose this product to direct sunlight for a long time.
- Do not dispose of this product in fire to avoid explosion.
- Do not try to disassemble this product to make any modifications,as it does not contain any repair components.
- Do not use this product in the rain.
- If you do not plan to use this product for a long period of time, please store it in a dry environment and charge the headset at least once a month to extend its life and avoid extreme temperatures and dust.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>