ewell DS-S1 Bluetooth Beacon User Manual
- June 6, 2024
- ewell
Table of Contents
ewell DS-S1 Bluetooth Beacon
Product introduction
Bluetooth beacon DS-S1 is a terminal device that periodically broadcasts Bluetooth beacons to the surrounding environment. It can be widely used in Internet of things applications such as indoor positioning, indoor navigation, exhibition navigation, patrol and clock in.
Packaging list of Bluetooth beacon
Serial NO.| Name| NO.| Remarks
1| Bluetooth beacon| 1|
2| No.5 Battery| 2|
3| 3M Glue| 1|
4| User’s Manual| 1|
5| Certificate| 1|
Product features
- Bluetooth for precise positioning
- Dustproof and waterproof
- Configurable parameters
- Low power consumption, long standby time, replaceable battery
Product parameters
Communication Frequency ： 2402-2480MHz
Communication Protocol： Bluetooth 4.0
Communication distance： 13m
Standby Current： <0.3uA
Battery Life： 5 years (Actual life related to solution)
Battery Specification： No.5 Battery
Dimensions (L,W,H) ： φ80mm*30mm
UUID:
FDA50693-A4E2-4FB1-AFCF-C6EB07647825(Fixed)
Instruction for use
Common troubleshooting
| Serial NO. | Common troubleshooting | Exclusion method | Remarks |
|---|
1
|
No signal
| Take out the battery, check the front and back, and install it in the correct
direction.
|
Check whether the switch is on.|
Warranty
Warranty Card
Product Name| | Model|
---|---|---|---
User Name| | Tel Number|
Postal Address|
Purchase Date| | Purchase Route|
Product SN|
Warranty terms:
-
When purchasing this product, please fill in this card carefully and carefully read the warranty terms to ensure that the product is under effective warranty.
-
With the warranty card and purchase document (the copy is invalid), the user can enjoy the warranty service of the whole machine for one year from the date of purchase. During the warranty period, spare parts damage or machine failure caused by product quality problems can be repaired and replaced free of charge;
-
The information filled in this warranty card is true, otherwise, it is invalid.
-
In case of any of the following circumstances during the warranty period, the warranty service cannot be enjoyed.
-
Damage or failure caused by improper installation, use and storage;
-
Damage or failure caused by force majeure (such as flood, fire, earthquake, etc.);
-
Damage or failure caused by disassembly and maintenance not approved by the company;
There is no warranty card and purchase document, and the purchase document is inconsistent with the product or altered. -
After the warranty period expires, the user can still get the maintenance service of the company, and the corresponding maintenance, transportation and other expenses shall be paid at that time.
Production Address： 11F, Building A, Yihui Center, No. 399, Qianmo Road,
Binjiang District, Hangzhou City, Zhejiang Province,China Ewell biotechnology
Co.,LId
Tel： 400-086-3880
Email： 310052
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be u sed in portable exposure conditions without restriction
FCC ID: 2A3QT-DS-S1