MOB MO8508 Printed Digital Pedometer User Manual
- June 3, 2024
- MOB
Table of Contents
MOB MO8508 Printed Digital Pedometer
Hereby, MOB, declares that item MO8508 is in Compliance with the essential
requirements and other relevant conditions of Directive 2014/30/EU. The full
text of the EU declaration of conformity is available at the following
internet address:
www.momanual.com.
MOB, PO BOX 644, 6710 BP (NL).
Features
- Pedometer (step counter) adopts microcomputer technology with mini-construction design and readable LCD Display. The paces are detected via the movement when worn on the waist.
- Step counts range from 0 to 99999.
- Press reset key to return the LCD display to zero.
- It will auto turn off when not in use after one and a half minutes.
Mounting: Attach the pedometer securely and vertically to your waistband or belt. Close to the center of your body, incorrect mounting may cause inaccurate results.
Measurement:
- Start the measurement by pressing the RESET key. The step counter will keep counting until the RESET Key is pressed.
- Once counting is stopped, the LCD will display the number of step mileage→ kilometer → calorie in sequence when pressing the MODE key.
Power
- Powered by Ag 10×1.battery included.
- To maintain accurate reading, we recommend that the battery is changed every 12 months.
- Push to open the battery door, take out the old battery, replace with the new battery, and follow the required polarity as illustrated.
- Close the battery door properly.
Reference: Table of Standard Calorie Consumption when walking.
Note:
- For this pedometer to function correctly please ensure that you operate and maintain it correctly.
- Do not disassemble the instrument except when replacing the battery, or you may cause damage to it or influence its measuring accuracy.
- To maintain accurate reading, the battery should be changed every 12 months.
- To maintain accurate measurement, please attach the pedometer vertically to your waistband or belt.
- Do not drop or get wet.
Trouble shooting:
Problems | Cause & Remedy |
---|---|
Not all your steps were detected | Mount the pedometer properly according to |
the manual and ensure your walking method is correct.
Obscure display
LCD is black
| Low battery, replacing new battery is necessary.
Ambient temperature is too low. The normal display will recover when the
temperature rises.
LCD is black The pedometer has been put under direct sunlight of operated in high temperature too long, LCD display will recover normal status in the shade.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>