HOFFEN AK-8822 Induction Cooktop User Manual

: June 9, 2024
: Hoffen

Table of Contents

INTRODUCTION
INTENDED USE
TECHNICAL DATA
PRINCIPLES OF SAFE USE
EXPLANATIONS OF THE SYMBOLS
CONTENTS OF THE SET
CONSTRUCTION
USE
CLEANING AND MAINTENANCE
TROUBLESHOOTING
STORAGE AND TRANSPORT
WARRANTY AND SERVICE
DECLARATION OF CONFORMITY WITH EUROPEAN STANDARDS
- MANUFACTURER
CUSTOMER SUPPORT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

HOFFEN AK-8822 Induction Cooktop User Manual

INTRODUCTION

Thank you for choosing our product. We are confident that its use will be a great pleasure for you.
Please read the user manual carefully before using the product, in particular the instructions on safe use.
Please keep this manual in order to be able to refer to it while using the product. T
he manual is also available in electronic form on the manufacturer’s website.

INTENDED USE

The device is designed to prepare dishes using the electromagnetic induction.
Its use for any other purpose is incompatible with its intended use.
The device is designed exclusively for indoor use in a house or apartment and may not be used for commercial purposes.
Read these instructions carefully before use.

TECHNICAL DATA

Induction cooktop

PRINCIPLES OF SAFE USE

Read these guidelines carefully. Not following them may be dangerous or illegal.

WARNING!
The surfaces of the unit can become very hot!
Please be careful when using!

IMPORTANT SAFETY INSTRUCTIONS
The device can be used by children over 8 years of age and people with limited mental or physical predispositions, only if under supervision or if they are familiar with the user manual and understand the danger posed by using the device.
This device is not a toy.
Disconnect the unit from the power supply before starting cleaning and maintenance.
If the power cord is damaged, it must be replaced by the manufacturer, a service center representative or qualified personnel.
Do not use the device in case of visible signs of damage.

DO NOT RISK
The device is designed for use in kitchens, houses, flats and the like.
Not suitable for outdoor use (terraces, balconies, etc.).
Do not use this device in locations where it is prohibited to use electrical equipment, or where it may cause harmful interference or
other hazards.
Always connect the device to a power supply that matches the data on the rating plate.
Do not switch on or use the device close to flammable materials.
Do not place any flammable objects on the device – this may result in damage to the device or even fire.
Do not lift or carry the device while it is switched on.
The device must not be used in combination with a time-controlled switch or remote control.

SURROUNDING’S
The device is designed for home use and should be placed on flat surfaces resistant to high temperatures – stone worktops, tables, etc.
The device should be moved away from walls, vertical furniture surfaces and any materials that are not resistant to high temperatures – elements become very hot.
Do not use or store the device in dusty, damp or hot conditions.
Keep children under 8 years of age and pets away from the unit when it is in operation, as the power cord may cause tripping, tipping over or other injuries.
Do not leave working device unattended.

WATER AND OTHER LIQUIDS
Do not expose the device to water or other liquids.
It can influence work and the life span of electronic components.
Avoid working in an environment with high humidity-steamed kitchens or bathrooms.
Particles of water from any source may cause moisture to appear in the device, which may result in damage to the device and, in extreme cases, of electric shock.
Do not use the device when your hands are wet or damp.
QUALIFIED SERVICE
Only qualified personnel or an authorized service center may install or repair this product.
Repairing by an unauthorized or unqualified service may cause device damage and warranty loss.
The manufacturer is not responsible for problems caused by unauthorized modifications to the equipment made by the use

EXPLANATIONS OF THE SYMBOLS

| This symbol indicates that the package contains a user manual that should be read before use.
---|---
| Important information on the use of the device.
| WARNING! Please read the warnings carefully. Failure to do so may result in damage to the device and, in extreme cases, in loss of health or life.
| For indoor use.
| Symbol for Class II equipment. Equipment where protection against electric shock is provided not only by basic insulation but also by additional safety measures such as double insulation or reinforced insulation.
| Symbol for corrugated cardboard (packaging material).
| The mark placed on the product indicates that the product complies with the basic requirements and other provisions of the so-called “Directive of the ‘New Approach’ Directive of the European Union.
| The packaging of the device can be recycled in accordance with local regulations.
| The packaging elements should be disposed of in appropriate containers.
| The marking of the container into which the box – paper should be discarded.
|

Marking of the container into which the stamping should be thrown plastic/metal.

---|---
| The device is marked with a crossed-out rubbish bin, in accordance with the European Directive 2012/19/WE on used electrical and electronic Equipment (Waste Electrical and Electronic equipment – WEEE). Products marked with this symbol should not be disposed of or dumped with other household waste after a period of use. The user is obliged to get rid of used electrical and electronic equipment by delivering it to designated recycling point in which dangerous waste are being recycled. Collecting this type of waste in designated locations, and the actual process of their recovery contribute to the protection of natural resources. Proper disposal of used electrical and electronic equipment is beneficial to human health and environment. To obtain information on where and how to dispose of used electrical and electronic equipment in an environmentally friendly manner user should contact their local government office, the waste collection point, or point of sale, where the equipment was purchased.

CONTENTS OF THE SET

Included in the set:

Induction cooktop
User Manual

| If any of the above items is missing or damaged, please contact your dealer
---|---
| We advise to keep the container in case of any complaints. Keep the packaging out of reach of children.

You print a version of the user manual with the large font size or download it from the web address below:

Or by scanning the QR code beside:
Scan Me

CONSTRUCTION

TOP PLATE APPEARANCE

Construction

Power cord (not visible)
Plate surface
ON/OFF button
Mode switch
Increase power or cooking time
Panel for automatic programmes
Reduce power or cooking time
Cooking time setting
Locking the touch panel
Display

USE

Ensure that the cable is routed so that there is no possibility of damage, cutting, pushing or pulling that could cause damage to the equipment or injury to you or anyone else.
Place the device on a flat, horizontal and stable surface.
The device may only be connected to a power outlet equipped with a protective pin.
If you notice that the housing, plate, cable, or power plug is damaged, do not turn on the device.
Be careful not to let any liquid get inside the device! This is an electrical appliance and liquid may cause a short circuit that may damage the appliance or cause electric shock.
Do not use metal or glass tools during operation as you may damage the non-stick coating on the heating panels.
If there are any leftovers from the previous dishes on the heating plate, you can remove it using a wooden, plastic or silicone spatula (intended to be used with Teflon) or a paper towel.
Do not heat empty containers, do not overheat them as well.
Do not place metal objects such as knives, forks, spoons, lids, cans and aluminum foil on the surface of the plate.
Do not use the appliance on carpet, tablecloth (PVC) or any other product with low heat resistance.
Do not place a piece of paper between the cookware and the appliance plate. The paper may catch fire.
Do not block the air outlet.
Do not touch the surface of the hob immediately after removing the cookware, as it will be very hot.
Do not place the device in the vicinity of objects sensitive to magnetic fields (e.g. radios, televisions, automatic bank cards and cassette tapes).

BEFORE THE FIRST USE
Remove the device from the packaging, unpack from the protective packaging and unwrap the power cord.
The device should be placed in spot where there is no risk of knocking and where children and pets cannot reach it.

INDUCTION COOKING – BASIC INFORMATION
When cooking on an induction plate, ferromagnetic cooking utensils are heated by eddy currents generated by electromagnetic induction.
This makes the cooking process more energy efficient, eliminates the time it takes to heat up the cookware and controls the cooking temperature more precisely.
When cooking, only the cookware is heated, the plate itself only receives heat from the heated dishes standing on its surface.

Due to the nature of induction cooking, only cookware designed for this purpose should be used.
They are marked with a symbolic representation of an induction coil (the marking on cookware is not the same as the graphic symbol used in electrical installations):

When using the appliance, use flat-bottomed dishes with a diameter of 13-20 cm.
Ceramic, glass, aluminum, copper and other diameters are not suitable for use with induction cooktop.

INDUCTION COOKTOP USE
Place the cooking vessel with the food you are preparing on the surface of the plate (2)and touch the ON/OFF button (3) to turn on the unit.
You will hear a short beep and the LED above the button symbol will light up.
The default operation mode is the power control mode (lightning symbol). Use the mode button (4) to switch between modes.
Available modes:

Power regulation (lightning symbol)
Temperature regulation (ºC symbol)
Automatic programs (Function)

In the power and temperature regulation modes, the power/temperature is changed by touching the power up (5) or temperature down (7) button.
The power is adjustable from 200 W – 2000 W, while the temperature is 60 ºC – 240 ºC.
The default operating time in these modes is 2h. The operating time can be changed, which will be described later in this chapter.
The automatic programs allow you to use the predefined settings of the device depending on the intended use.

There are 7 available programmes + boost function:

Keeping temperature: maintaining the temperature of a hot meal.
Warming up: reheating a cool meal.
Warming milk: heat milk, coffee, tea, etc.
Steaming: steaming in a small amount of water using suitable cooking utensils.
Boiling water: quickly boil water.
Frying: frying dishes
Deep frying: Deep-frying food using appropriate cookware.
Boost function: For 5 minutes, it increases the cooking power to the maximum; after which it returns to the previous cooking program.

After setting the automatic programme mode, the programme is selected using the power increase (5) and power decrease (7) buttons. An LED will light above the active program icon.
After the appliance starts operating, it is possible to adjust the time after which the heating will be turned off automatically.
To do this, press the cooking time setting button (8).
Briefly touching the buttons for increasing (5) or decreasing (7) the cooking time changes the cooking time by one minute.
Holding down the buttons for increasing (5) or decreasing (7) the cooking time changes the cooking time by 10 minutes. The maximum cooking time is 3 hours.
The appliance is equipped with a touch panel lock function to prevent accidental changing of the operating parameter settings.
To activate it, touch the touch panel lock button (9).

CLEANING AND MAINTENANCE

| WARNING: The device must not be submerged in water or washed under running water!
---|---
| Make sure your hands are dry before cleaning the unit.
The device has to cool down and be disconnected from the power supply
| The device requires no maintenance.

Heating plate should be cleaned after each use.
This will help you avoid the build-up of food residues.
Once the plate surface have cooled down, it can be cleaned using a wooden, plastic or silicone Teflon spatula, paper towel or soft cloth.

For soiling more difficult to remove, a slightly dampened paper towel or soft cloth can be used.
The surfaces of the device can be cleaned with a paper towel or soft cloth.

TROUBLESHOOTING

In case of any problems with the device, please refer to the following tips.

The device has no user-serviceable parts.

The device does not switch on| Check that the plug or power cord is not damaged.
Check if the connection between the plug and power supply is correct.
Check whether the electrical outlet is damaged – select another one.
---|---
The following symbol appears on the display. E0| There is no container on the plate or container is of incorrect quality. Place the correct dish on the plate.
The following symbol appears on the display. E01| Power supply voltage over limit Ensure that the supply voltage corresponds with that specified on the unit’s rating plate.
The following symbol appears on the display. E02| The voltage is too low. Ensure that the supply voltage corresponds with that specified on the unit’s rating plate.
The following symbol appears on the display. E03| The temperature sensor has overheated Cool the device and turn it on again
The following symbol appears on the display. E06| A short circuit has occurred on the electronic circuitry of the device. Cut off the power supply.
The following symbol appears on the display. E08| The device’s main sensor is not responding. Contact the manufacturer’s service department.
If the problem persists, contact the manufacturer’s service department.

STORAGE AND TRANSPORT

STORAGE OF EQUIPMENT
If you are not going to use the device for a long time, after disconnecting it from the power supply, cooling and cleaning its components, store it in a dry room away from heat and moisture sources.
It is best to place the device in its original packaging, out of reach of children and pets.

TRANSPORT OF THE DEVICE
It is recommended to transport the device in its original packaging.
Do not expose the unit to excessive vibration or shock during transportation.
If you need to move the appliance, do so only after it has been switched off and cooled down, holding both hands on to the handle.
Do not expose the device to high temperatures or moisture.

WARRANTY AND SERVICE

The product is covered by a 3-year warranty, counting from the date of sale of the product.
If you need to make use of a warranty claim, please contact the manufacturer’s helpline or point of sale.
The product returned for warranty claim should be complete and best in its original packaging.

DECLARATION OF CONFORMITY WITH EUROPEAN STANDARDS

MTech sp. z o.o. hereby declares that the product complies with all relevant provisions of the so-called the ‘New Approach’ Directive of the European Union.